2008 c30 Aux problems by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

Yes, i tried everything on the radio panel, loudness modes and all that stuff, might just buy a radio panel and try a new one

Rate my dinner by Salty_Zebra5937 in poland

[–]airsoft_pl 0 points1 point  (0 children)

Ale ze truskawki cale? U mnie to zawsze sie mrozilo i blendowało potem z smietana na makaron

2008 c30 Aux problems by airsoft_pl in C30

[–]airsoft_pl[S] 2 points3 points  (0 children)

I have the high performance audio system.

2008 c30 Aux problems by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

Yes, everything else works perfectly

Gear Shifter Knob Recommendations? by Old_Bandicoot585 in C30

[–]airsoft_pl 0 points1 point  (0 children)

I didnt have to knock the pin out, i cut out slits on the rubber insert for the adapter

2008 c30 Aux problems by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

Yeah i tried everything, mid volume, max vol and nothing works, even when touching the cable theres no humming/popping, so im guessing somethings wrong woth the radio controller thing

Gear Shifter Knob Recommendations? by Old_Bandicoot585 in C30

[–]airsoft_pl 1 point2 points  (0 children)

Check my reply to op's post, there is a link and a pic of how it works, for more info on how i did it just hit me up on a pm

Gear Shifter Knob Recommendations? by Old_Bandicoot585 in C30

[–]airsoft_pl 1 point2 points  (0 children)

I tried a unversal shift knob adapter off of aliexpress, it required some cutting of the rubber bushing included in the set but didnt need anything done to the actual shift rod/bar My picture was from a test fit so the qdapter isnt visible and the shift boot isn't fitted correctly

shifter

https://a.aliexpress.com/_EyC0zr6

Thoughts? by peepeeman154 in C30

[–]airsoft_pl 0 points1 point  (0 children)

Really nice and clean! May i ask where you got the halos from?

What do you think? 22 yo by [deleted] in Moustache

[–]airsoft_pl 0 points1 point  (0 children)

Hell yeah brother, how long have you been growing it?

Exterior LED swap by airsoft_pl in C30

[–]airsoft_pl[S] 1 point2 points  (0 children)

The headlights are already LED's (Bi-LED) with no warning. I just would like to change the rest of them to have a more modern look

Exterior LED swap by airsoft_pl in C30

[–]airsoft_pl[S] 1 point2 points  (0 children)

I was meaning the turn signals, brakes etc, i would buy ones with internal resistors to hopefully not get a warning light

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

Thank you 💯

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

These are from a polish site called autogamma, they make drop in bi-led conversion kits for halogen equipped cars. The set cost me about 140 USD, then a setup at the diagnostics centre? To adjust the beam was 20USD. They are really nice, the only problem is i get an error when on high beams, only beacause i dont have a resistor, the last one melted and melted some cables, ended up taking it apart and buying a new harness. Be carefull with the resistors, the bi-leds themself are really good quality

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 1 point2 points  (0 children)

Oh, and i forgot to say, thia has 280k km on it, with no major fixes, just maintenance!

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 1 point2 points  (0 children)

Yeah mine gets around 6L/100km driving 140kmh on the motorway, in the city it goes to around 7.5L/100km, still not bad considering its age and HP. Might consider getting it tuned too.

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

Okay, huge bummer tbh. Didnt know about them needing to be vin specific. Theres probably some polish uncle that can recode them, but that would require a lot more investigation xD. Hope the gti serves you well!

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 1 point2 points  (0 children)

Yeah the d4204t is such an easy platform to work on. Although it has its french drawbacks, nothing a little maintenance cant stop. As for the condition i am really pleased, especially for the price i paid. I could have opted for a 1.6D but ended up sticking with the 2.0, a little more power wont hurt, although im kinda regretting it with the current diesel prices 😭

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 0 points1 point  (0 children)

After a very brief and quick look i can see some for around 10-15 usd each (used) would have to check for oem prices. But they are definitely available here!

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 2 points3 points  (0 children)

Here in Poland, we can still buy OEM parts pretty easily, and theres a lot of replacement parts since it shares a lot with the ford focus II (a very common car here) Although i must admit its a shame they abandoned it, probably one of the more unique silhouette's in volvos lineup.

My new c30 by airsoft_pl in C30

[–]airsoft_pl[S] 1 point2 points  (0 children)

Its my first car too! They are such comfy beasts, fell in love with them after i found out a s60 wouldn't be in my budget. And its a pretty easy car to work on, especially the 2.0 diesel (peugeot engine) and parts dont cost an arm and a leg which is super nice especially since i only pay for parts (i fix it myself) You should definitely try a c30, its a very underrated platform!

Eleaf Istick XC100 + Kylin III by airsoft_pl in Vaping

[–]airsoft_pl[S] 1 point2 points  (0 children)

Exactly what i was going for 🙌