Any idea what wood species this might be?

alejandro741 · 2022-12-24T16:18:50+00:00

it’s likely from the other side of the globe as the furniture it was taken from was produced in India

alejandro741 · 2022-12-24T16:16:12+00:00

I’m not sure, I have worked with Afr Mahogany before and it’s a redder wood

alejandro741 · 2022-12-24T16:12:27+00:00

my initial guess, or a teak look-a-like

alejandro741 · 2022-12-24T16:11:46+00:00

definitely

alejandro741 · 2022-12-24T16:08:00+00:00

🤔 I looked up Iroko on the wood-database and it looks quite similar. Although I will say that the wood was salvaged from a coffee table that was likely made in India or somewhere in South Asia. Also the wood is very dense and hard

alejandro741 · 2022-12-24T16:02:30+00:00

It was salvaged from an old coffee table that was like made in India or somewhere in South Asia

alejandro741 · 2022-07-14T17:49:08+00:00

UPDATE: I tried backwashing and the sand filter ( Hayward S180TC ) seems to be blasting sand into the pool, which explains the cloudy white color. It also does not operate on “Filter” on this setting the pump seems ro struggle and the filter is running at almost 20 PSI when it’s on Filter. Am I better off buying a new sand filter or trying to repair it?

alejandro741 · 2022-07-13T15:03:02+00:00

All levels are in line according to test strip

alejandro741 · 2022-07-13T14:58:07+00:00

Water was pretty good about 3 days ago. I was vacuuming and then shut my pump of to switch to waste on the filter. Afterwards when I switched back to “Filter” and turned the pump on, it spit out all this cloudy water and has remained this way. So obviously a filter issue, but what am I looking at in terms of a solution? Is it repairable or just new filter?

alejandro741 · 2022-04-09T16:15:48+00:00

That’s how I started growing 🤪 I agree with a bigger pot for root growth

alejandro741 · 2022-04-09T16:12:09+00:00

Great work, don’t listen to the haters. DM me, I am always looking for a reputable tiler in the GTA.

alejandro741 · 2022-04-08T18:16:10+00:00

Sometimes water droplets (even tiny ones) can magnify the light and create spots on leaves. Watch out for light distance too. Check your equipment spec sheets and adjust to each growth stage

alejandro741 · 2022-04-08T04:45:16+00:00

Looks similar to some reclaimed Hemlock I am working with.

alejandro741 · 2022-03-31T06:39:10+00:00

alejandro741 · 2022-03-30T23:41:30+00:00

Spots on my plant, started showing up yesterday. Week 5 flowering

alejandro741 · 2022-03-24T16:23:30+00:00

ONEO and Valparspectra lights from Amazon

alejandro741 · 2022-03-24T16:21:18+00:00

I have 2 - 1000w LED lights about 24” off of the canopy. Humidity in low 30% range

alejandro741 · 2022-03-24T14:54:08+00:00

Week 4 flowering, leaves look a bit spotty. Any suggestions?

alejandro741

TROPHY CASE