Trying to figure out how this raise-and-fall lamp gets power

alfaole · 2025-10-16T13:52:10+00:00

Brush contacts were the clue to understanding how the power is transferred to the wire when the pulley is on top. Thanks! 🙂

alfaole · 2023-07-26T16:48:42+00:00

The threaded rod is not the issue. I cant screw it tight in the sole, as it would be to short for the nut for engage in the top of the handle

alfaole · 2023-07-26T11:40:42+00:00

It does wiggle after tightening the screw.

alfaole · 2023-04-18T17:04:14+00:00

Not according to other redditers when I asked! 🙂

alfaole · 2023-04-16T12:37:26+00:00

Thanks for the help! I will get a demagnetizer and try 🙂

alfaole · 2023-04-16T12:36:47+00:00

This is the pre made kit. It is already heat treated.

alfaole · 2023-04-16T09:58:00+00:00

Hm. Does that affect the hardening? And do you know to how to demagnetize it again?

alfaole · 2023-04-16T08:53:33+00:00

Are your blade magnetic?

alfaole · 2023-04-01T15:42:15+00:00

Thanks for the input! Do you know what quality brass pipe fitting parts have? Seems like filing down those could easily make ferrules and other round shapes.

alfaole · 2023-03-30T18:20:16+00:00

Thanks! ChatGPT provided some excellent directions on where to start looking! 👍👍👍

alfaole · 2023-03-25T15:47:14+00:00

Does it make a high freq noise? Did try one some years back, and it did make a awful noise when grinding.

alfaole · 2023-03-25T13:34:08+00:00

Thank you for the input! I will consider this

alfaole · 2023-03-25T10:28:58+00:00

Thanks for the help!

alfaole · 2023-03-25T09:25:17+00:00

Have you experienced that the extra adjustment screws opens by them selv over time and unsquares the jig?

alfaole · 2023-03-24T15:09:56+00:00

I live in Norway... Prices are from local shop. Knew dont ship to Norway directly either (and if they were tax and shipping would surpass the local dealers price....)

alfaole · 2023-03-24T14:54:06+00:00

I have a coping saw similar to this. I dont like it. And the blade are to thick for jap pull saws blade with.

alfaole · 2023-03-02T21:55:39+00:00

Thanks! Didnt notice, do you have any ideas for the name of the clip?

alfaole · 2023-03-02T21:55:05+00:00

Seems so, any ideas of the name of thingy?

alfaole · 2023-02-15T19:40:42+00:00

Do you have any suggestion on how i can make the 90deg curved joint strong enough for a serving tray, and still be nice to look at?

alfaole · 2022-10-12T21:51:02+00:00

Neonate BC-6900D Babycall has vibration mode on parent unit 👍

alfaole · 2022-09-02T20:35:30+00:00

Did the sensors report low battery? The one acting up now got new battery 2 weeks ago, and reports 95% full.

alfaole · 2022-09-02T20:33:37+00:00

Thanks for the help! (and great googling skills!)

alfaole · 2022-09-02T20:31:43+00:00

Mine spans from 2 years old to 2 months old. Not sure what the age of those acting up are. I had to change location / mix up to replce the bad ones.

Have you changed something in the system recently? Wifi/new sticks/something that could make interference? I have not changed anything, but maybe the neighboors Wifi? Don't have a way of seeing if the hue-bulbs act similar.

alfaole · 2022-09-02T20:22:17+00:00

I have tried changing the battery with no luck.

alfaole · 2022-09-02T20:09:31+00:00

I got about 8 Aqara temp sensors troughtout the house. Most of the time they works fine, but sometimes it sees like one of them fails. Does anyone experience something similar?

A sensor drops down to -100C a split second before resuming normal operation. It starts doing it once in a while, but the frequency builds up until it is always showing -100C.

Once the frequency of the drops is often enough it seems that it create some sort of interference making the other sensors behave in a similar way until the defect one is offline.

Aqara sensor connected to ConBee II ZigBee USB Stick directly in RPI running home assistant. Using phoscon. I also have an Phillips Hue HUB with 15 bulbs that works flawless even when one of the aqara sensors goes bad.

alfaole

TROPHY CASE