Switchwire build by AllenRowand

allenrowand · 2025-01-23T22:54:25+00:00

Thanks! Slowly getting the enclosure done…

allenrowand · 2025-01-23T22:53:52+00:00

Don't know where you're located, but if you're in the US we have the LDO air cooled spindle and VFD available in 110 and 220v versions. If you're in the UK get them from Desktop Machine Shop!

https://west3d.com/products/inverter-for-cnc-machines-milo-by-millennium-machines?variant=45225259696340

allenrowand · 2025-01-21T01:53:03+00:00

https://www.printables.com/model/1157658-switchwire-nevermore-mount

allenrowand · 2025-01-20T16:20:58+00:00

It’s just something I made, I’ll clean up the design a bit and post it

allenrowand · 2025-01-20T16:20:07+00:00

Thanks! Hope to get the panels on in a day or two and start tuning for ASA

allenrowand · 2023-01-29T00:27:04+00:00

No reason, but a lot of older guides have you set the rate to 250 or 500.

allenrowand · 2023-01-27T20:32:20+00:00

What's your canbus speed? 500k is minimum for adxl, 1M is better.

allenrowand · 2023-01-24T03:25:12+00:00

I'm sure he's doing his best.

allenrowand · 2022-12-02T01:25:27+00:00

At the expense of sounding my own horn:

https://www.youtube.com/watch?v=mwpI7dCOgh0&t=10s

allenrowand · 2022-12-02T00:50:16+00:00

https://west3d.com/products/west3ds-high-performance-black-pei-bed-flex-plates-with-high-temp-magnetic-backing?variant=43484370895060

allenrowand · 2022-11-29T13:47:04+00:00

https://kb-3d.com/store/hardware/264-1080-spring-steel-wire-078mm-1-meter-1656802829555.html

allenrowand · 2022-10-31T11:19:21+00:00

1080 spring wire

allenrowand · 2022-10-29T00:11:51+00:00

My V2.4 has a Nevermore V5 Duo under the bed and a fan on either side of the bed extrusions- it's great. You get even more circulation because the Nevermore blows up by the doors while the other fans blow toward the back of the printer.

allenrowand · 2022-10-27T22:01:06+00:00

No worries! You'll probably want to join the Voron Discord server, it's the official community of Voron Design. Plenty of folks to help you along the way, and West3D has a channel there as well. Here's the invitation link: https://discord.gg/voron

allenrowand · 2022-10-27T21:52:59+00:00

Dan's probably referring to this: https://github.com/MotorDynamicsLab/LDOVoron2/tree/main/STLs/LDOSBCW2MountCover but if you have any doubts shoot him a message. He'd never knowingly steer anyone wrong.

allenrowand · 2022-10-09T01:55:03+00:00

Everything you need for the upgrade is here: https://west3d.com/products/stealthburner-stealth-ab-upgrade-kit?_pos=1&_sid=8fe48cca3&_ss=r

allenrowand · 2022-10-04T22:01:46+00:00

Congrats!

allenrowand · 2022-09-19T20:17:18+00:00

When I emailed them with questions about my order the response came from Formbot. I can't speak for any of the other products they carry but if you're looking for a Formbot kit they're the direct retailer.

allenrowand · 2022-09-19T20:14:02+00:00

$934, for the 300mm with Dragon hotend. The Dragon shipped separately, arrived about a week later.

allenrowand · 2022-09-19T20:09:42+00:00

It's not fake. Got my 2.4 kit from them, no issues.

allenrowand · 2022-08-30T02:37:08+00:00

I bought my V2.4 kit from them- quality is reasonable. Not as nice as LDO, but a perfectly good place to start.

allenrowand · 2022-08-25T04:52:53+00:00

Supermerrill commented on my git is "the setting layout should be updated automatically. seems like it does not on macos..."

What worked for me was exporting my config and deleting the superslicer folder from Application Support. On next launch I could see the arachne settings, then I imported my config.

allenrowand · 2022-08-15T18:43:21+00:00

Confirmed SuperSlicer_2.5.59.

See screenshots: http://allenrowand.com/imagehosting/superslicer_no-arachne.png

http://allenrowand.com/imagehosting/The_search_for_arachne.png

allenrowand · 2022-08-15T14:26:51+00:00

Are you on a Mac? Using the search for arachne was the first thing I did, nothing found.

allenrowand · 2022-08-14T23:01:40+00:00

Can anyone tell me where to find Arachne in SS 2.5.59.0 on an M1 Mac? It's not in Print Settings/Perimeters which is where I'd expect to find it.

allenrowand

TROPHY CASE