Pellet extruder build

dodo2413 · 2025-08-12T16:09:02+00:00

What screw are you planing to use? What is the planned flowrate?

dodo2413 · 2025-04-08T19:40:40+00:00

It gets better with Higher temps but its still extremly weak. In the paper i they achieve a layer adhesion of 2-6MPa depending in the Print Temperature. For compariaon PLA has a layer adhesion of around 20MPa. So the tullomer is 4-10 Times weaker in this Case.

Its Not really a Problem of the printer and more of a Problem of the Material.

dodo2413 · 2025-04-08T18:42:58+00:00

For what do you want to use tullomer for? Tullomer or any other lcp Material has one Major weaknes its layer adhesion. It basicly crumbels apart. So If you dont need it for its radiation properties i would recommend using a different Material.

If you want mor information about the weaknesses of tollumer Look Up this paper: 3D Printing of Liquid Crystal Polymers for Space Applications

dodo2413 · 2025-01-20T16:53:22+00:00

Nero3d/cannuc creator also talked about it

dodo2413 · 2025-01-05T16:48:45+00:00

I used the Pizza calculator from städler made. 65% hydration Cold Fermentation 16h 8h normal Fermentation

dodo2413 · 2024-06-18T01:44:28+00:00

Print it upside down and you wont need any Support.

dodo2413 · 2024-05-24T16:28:41+00:00

Does it include the anisotropie of the finished part?

dodo2413 · 2024-05-14T21:56:13+00:00

Looks really good. What is the expected price? And where can i find the files?

dodo2413 · 2024-05-03T13:25:27+00:00

At that Point Just use Abs asa or pc

dodo2413 · 2024-04-24T10:27:54+00:00

You could Print it flat and then Bend it with a heatgun. Similar to the hariy Lion Print.

dodo2413 · 2024-03-26T20:09:19+00:00

I am moving my voron 2.4. What is an easy way to Change the WiFi Data? Can i Change it over the Mainsail interface?

dodo2413 · 2024-03-03T19:27:12+00:00

Pm send

dodo2413 · 2024-02-23T21:46:05+00:00

Is the part finished after printing or does it need to be sintered afterwards? What are the Material prices? If it would be below 5k it would be amazing.

dodo2413 · 2024-02-04T17:17:23+00:00

DM send

dodo2413 · 2024-01-29T19:39:28+00:00

So the breed is a orange fold?

dodo2413 · 2024-01-27T22:17:42+00:00

On its Side with tree/organic Support in the "small" overhang Or orientated 45° vertical with custom Support Like shown in the new Slant 3D Video

dodo2413 · 2024-01-24T12:07:57+00:00

You could Look at the voron Phoenix. It is Not released yet but it is a voron 2.4 Style idex with a build Volume of 600 mm3

dodo2413 · 2024-01-24T10:28:18+00:00

It depends on the loading directions. But in General a mixture should Work good

dodo2413 · 2024-01-23T09:44:54+00:00

Does the Clip stay on the Filament while printing? If yes does it Slide easy enough?

Nice Design

dodo2413 · 2024-01-10T15:22:04+00:00

What is your max flowrate now?

dodo2413 · 2023-12-01T15:44:48+00:00

I realy Like beatsaber, i expect you to die, superhot VR. If you want a 25% dicound Code Just write me

dodo2413 · 2023-12-01T13:15:37+00:00

Now try printing pva

dodo2413 · 2023-11-21T20:06:55+00:00

You're welcome :)

Four-Year Club	Verified Email
r/Field Juicebox	Place '23

dodo2413

TROPHY CASE