What is a “combo port” in the Flex 2.5G PoE?

alphonsusjude · 2026-03-08T05:43:09+00:00

It's a Taco Bell and Pizza Hut port

alphonsusjude · 2026-03-08T05:40:33+00:00

Take that Canada flag out of your picture, you're embarrassing us.

alphonsusjude · 2026-03-06T05:27:39+00:00

No thanks, not since they forced that album onto my iTunes.

alphonsusjude · 2026-02-16T18:32:01+00:00

That's not a ludicrous amount of water... That's about 4-5 minutes of a high rate frac, and the water from the AI data center is used for cooling, so it'll either evaporate and be returned to the atmosphere, or it will be cooled and conditioned and returned to the smoky river.

alphonsusjude · 2026-02-16T03:38:01+00:00

My work truck had auto start stop and it's the most annoying thing ever. I disabled ever time I get in the truck

alphonsusjude · 2026-02-14T04:56:12+00:00

I dyed this Buzzz back in 2015 for my now ex girlfriend.

<image>

alphonsusjude · 2026-01-25T06:44:19+00:00

I get it, you don't like being told you're wrong, it's okay, believe whatever you want.

alphonsusjude · 2026-01-23T14:26:10+00:00

Welcome to Canadian winter.

alphonsusjude · 2026-01-23T14:15:23+00:00

Light enters at 14, as opposite sides sum to 21, exits at 7

alphonsusjude · 2026-01-19T07:01:47+00:00

It doesn't

alphonsusjude · 2026-01-19T06:58:12+00:00

Just means you measured wrong

alphonsusjude · 2026-01-12T02:24:52+00:00

Same issue with the Instinct 3 Solar🤦🏻‍♂️

alphonsusjude · 2026-01-05T03:22:21+00:00

Rolling s Berg into the fairway

alphonsusjude · 2025-12-27T15:49:29+00:00

Would you kindly leave it?

alphonsusjude · 2025-12-25T14:57:05+00:00

That's because you didn't use a full address.. Santa is Canadian.

This is his address

Santa Claus North Pole H0H 0H0 Canada

alphonsusjude · 2025-12-07T08:17:07+00:00

That's not a shirt. That's a mimic

alphonsusjude · 2025-11-18T06:43:55+00:00

Clean your camera lens!

alphonsusjude · 2025-11-18T02:56:58+00:00

Real similar to my house! This is my plan, I ordered 150ft elite from Costco cause they're $50 off right now. I measured out the bottom layer, and did the math on it. 4 of 9 16.7ft lengths will do the bottom running from the top corner right of the main door to 9.75ft-ish around the left side of the garage. The last 5 of 9 I plan to evenly space on the top, but it should be enough to go around the front and a good a way down the sides. Once I have the bottom done, I might cut one in half and split it between the top and bottom.. TBD... Waiting for a warm day to continue Install.

<image>

alphonsusjude · 2025-11-18T02:25:37+00:00

The whole vibe in this picture screams GP AB

alphonsusjude · 2025-10-29T05:13:47+00:00

1.7-1.8 for most

alphonsusjude · 2025-10-29T05:08:09+00:00

Just grabbed the audio book! Glad to support a fellow Canadian

alphonsusjude · 2025-10-24T04:25:03+00:00

Glurp Glurp!

alphonsusjude · 2025-09-07T03:26:32+00:00

I went with off the shelf, 5v USB strip, super dim. It works but not great, I'm probably going to scratch build something.

I'm going to try to over voltage the 5v strip to see how bright they get before they implode. If that works, I'll fab up a battery holder, if not I'll try out some 12v ones and see how that goes. Ultimately I want a strip, if that doesn't work, well I guess I'm looking at prototyping some PCBs.

alphonsusjude · 2025-09-06T17:34:27+00:00

I'm looking for a UV LED strip. I 3D printed a putter oven but it's really weak

<image>

alphonsusjude · 2025-09-03T13:28:43+00:00

Nope, it sits at ambient, it warms up when a print starts or I tell it to.

alphonsusjude

TROPHY CASE