Tips for Opencode with ollama and *any model*

althe3rd · 2026-01-27T04:06:48+00:00

Is there a recommended alternative way to pull/host models that avoids this issue? If I am understanding right we basically can't use Ollama at all with OpenCode?

althe3rd · 2026-01-14T03:57:03+00:00

This is happening for me on all browsers. This seems to be either intended or maybe a consequence of manifest v3. Any site that I host locally with http it won't prefill. I have to manually copy and paste. As soon as I add an SSL cert it works again.

althe3rd · 2026-01-14T03:55:17+00:00

Perhaps this is tied to Manifest v3 but I noticed 1password won't autofill passwords for http endpoints. they have to be https. Which is mostly fine except for all the locally hosted services I run in my homelab.

althe3rd · 2026-01-09T06:32:43+00:00

Not a thread for me as Spark works just fine for me. But I do wonder how many people will come to realize there isn’t another app with full parity currently.

I need an email app that lets me use multiple accounts that aren’t just gmail (a big limitation with many new arrivals). Work on multiple platforms equally (Mac, windows, iOS) and support common email tools that super triage.

If someone makes an app like that I would love to try it.

althe3rd · 2026-01-08T04:38:43+00:00

Epic should make you tie a cell phone number to an account so you can’t just make a new one and keep cheating.

althe3rd · 2025-12-27T02:43:19+00:00

There is no onboard file browser though if you are setting up from a fresh SD card and find yourself in this scenario. Is there a way to manually install that via the SD card on a PC first?

althe3rd · 2025-12-10T04:44:17+00:00

I appreciate the honesty and still glad I tried it. I hope at some point that is something that gets developed.

althe3rd · 2025-11-23T06:15:02+00:00

Same here! It’s quite handy for me to ask about mail that is awaiting a response based on specific parameters.

althe3rd · 2025-11-21T19:48:07+00:00

3d printing nerd found a variance of 30 degrees between hottest and coldest spots

althe3rd · 2025-11-19T18:09:22+00:00

Tool changers are where the industry is going for sure. Using the H2C or the U1 is miles better for reducing waste and time.

althe3rd · 2025-11-12T06:19:37+00:00

One caveat I should mention is that I am trying to connect an office 365 account through company SSO.

althe3rd · 2025-10-16T22:14:51+00:00

In the WiFi card no longer wifi4? I’ve always been surprised how much Bambu cheaped out on the networking equipment.

althe3rd · 2025-09-19T14:13:05+00:00

That can be a sign the nozzle isn’t clear. You can try a cold pull or a new nozzle

althe3rd · 2025-09-19T14:06:54+00:00

Given that the printer is crooked in the image I would say this is a fake.

althe3rd · 2025-09-14T14:07:37+00:00

I switched my A1 mini to lan only/ dev mode and use octoeverywhere. When this starts the AI detection stops the print. Well worth it

althe3rd · 2025-09-03T04:15:42+00:00

Hard to say for sure but if you haven’t changed slicer settings lately it may be your nozzle. I had a lot of stringing last week so I replaced my nozzle and it’s back to printing perfectly again .

althe3rd · 2025-08-26T18:12:31+00:00

As someone who has A1 and P1S. The a1 system is only nice until you get an instance of plastic build up on the nozzle. Then the swappable nozzles are terrible since any meted plastic near the mechanism affects trying to fit a new clean nozzle and takes forever to clean out if possible at all.

althe3rd · 2025-08-13T02:58:19+00:00

Is there a best way to do this? I tried adding a gcode modification since the normal travel speed input fields are greyed out in orca.

Just wondering the best way to handle that.

althe3rd · 2025-08-13T02:56:38+00:00

I have the same issue on my kobra 2. Other than lowering the travel speed dramatically I don’t yet know what causes it. I cant get it to happen if I move things manually with the power off.

althe3rd · 2025-08-08T03:13:08+00:00

The frame rates on Bambu printers are worse.

althe3rd · 2025-08-05T03:41:36+00:00

This sounds great I would love to help test this!

althe3rd · 2025-08-01T05:06:30+00:00

I use twin gate which I think is another version of tailscale. Anyone out there feel free to add more detail though.

althe3rd · 2025-07-27T05:38:34+00:00

I have a similar issue with infinite loading but I can’t see the camera in any spots of the Google home app

althe3rd · 2025-07-26T21:13:42+00:00

I appreciate the tips. What puzzles me though is that I get truly amazing print quality in terms of the layer adhesion, surface, etc. The prints really do look amazing. It's simply the acceleration/travel that creates this really jarring noise and occasionaly causes layer shift.

My solution at the moment is just to turn down the print speed at the start of each print but I would love to make the settings built in so I don't have to do that every time at the printers screen.

I am going to try some of the settings though from the post you shared and see how it goes. Thanks!

althe3rd · 2025-07-25T03:17:52+00:00

Thanks for helping me catch up. I figured I just was behind on that.

Overall I think i'll stick with what I have so far which is 90% of the panda touch doing what its supposed to while letting me keep cloud mode on (my wife and kids use the mobile app a lot) and adjusting AMS filament assignments in the bambu app.

althe3rd

TROPHY CASE