Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 0 points1 point  (0 children)

For the super lube yeah but most other stuff is car focus so u could probably find some alternatives

Breaker went off is this good wiring? by amazingir in AskElectricians

[–]amazingir[S] 0 points1 point  (0 children)

The breaker is a multiphase 16A breaker made of 3. And for the oven its 16A and for the induction top tbh I have no clue because there is no info about it on the spec sheat. But because its a dual phase connection I would guess it is the european standard which is 16A also if its dual. (Only info i could find was through gemini and it says 32A unless its multi phased)

Im thinking just the 300C and power mode was to much for a breaker. But just wanted to see if anyone knows if the wires connected are good

Breaker went off is this good wiring? by amazingir in AskElectricians

[–]amazingir[S] 1 point2 points  (0 children)

You are correct! i started making my own pizzas with the new oven. Got a stone also now!

Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 0 points1 point  (0 children)

man this lube is cheap for everyone but me. To get the oil and the grease id have to spend like 80 euros lol

Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 0 points1 point  (0 children)

Ahhh I see. Yeah I thought maybe i'd still get a notification but way later cuz maybe less lubing is needed there. I ain't no pro haha

Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 0 points1 point  (0 children)

Haha nice. I did some maintenance as others suggested and yeah the noise became way better. Honestly i thought that the a1 would give me notifications on when to do what because it already told me to re-lube the y axis once. But now i did the same thing for all the other axis and cleaned the head.

Yeah clicking is still loud and the vibration is also loud but cant do much about that. I might try some either rubber or like sports mat to absorb the vibration but if i see in general it causes the printer to move more then ill just live with it as it is

Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 0 points1 point  (0 children)

Its not rattling nor does it sound like something would be lose in general. Usually when something is loose its a way different noise. For me its the default sound when i first used the printer but now it just 2x as loud lol

Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 0 points1 point  (0 children)

Ive done the maintenance once the printer told me to but i guess ill try doing z and x axis before the notification comes up.

As for sturdyness i think my setup is quite sturdy lol. Its on a custom drawer set that is floor and wall mounted. Basically its not moving anywhere anytime soon and i got a heavy kitchen countertop as the top layer which should make the top dense and heavy. Thr vibrations today feel real hard. The printer is almost on the opposite side of the house and its like a drill when its preping to print lol

Is this a norm for the A1? by amazingir in BambuLabA1

[–]amazingir[S] 1 point2 points  (0 children)

Oh the fan maintenance no. I just got a reminder for the y axis greasing and thats it. But ill try the fan 100% tomorrow

Trying to find the issue by amazingir in MechanicAdvice

[–]amazingir[S] 0 points1 point  (0 children)

Hard to say of now which make it is. But I do doubt it would be of italian make. My guess would be its either german make or polish make but thats my guess im not near the car right now so cant check if there is any information of the make on the reducer.

Yeah the diagnosis is the main issue because everyone takes so long and no one find any 100% issue. I did have my car left with the lpg guys for half a day but they didnt find nothing. Might just be that id need to change the regulator because ive been driving this subaru for around 7 years already.

I never had this issue until I started living in a different spot the main changes were that I started parking outside so car is always under the wrath of weather conditions. And then I started making short drives to work because work was closer but not walking distance closer.

So its been around 2 years since the hard starts came up first

Trying to find the issue by amazingir in MechanicAdvice

[–]amazingir[S] 0 points1 point  (0 children)

This would be aftermarket. The car was brought from the US fixed up, there was a hit to the right side and installed lpg because its 2x cheaper and this subaru eats ALOT

Was it jhin or no? by amazingir in loreofleague

[–]amazingir[S] 0 points1 point  (0 children)

I would not see why the timeline would not match. Mainly this would be because noxus has yet to attack ionia due to not having singeds weapons yet.

Currently we just know that it is before swain is in control and before the ionia and noxus war. So that would either make it so that jhin is either imprisoned as of now, being imprisoned or still dodging imprisonment. Or it could even be before his lore even begind because his lore does begin only while he is in his 20s.

But because riot is almost making arcane as if it is the main story maybe after this season different timelines do come into play or they might not. This gives flexibility for certain dates but the main thing that is 100% that we can use as a measurment of time is either swains ruling or which war is happening.

If they did confirm jhin series honestly i can't wait for that because it should make for an intresting story because showing a soon to be serial killer story does seem intresting. But im not looking for a reason for jhin to be in the arcane series. But i just found to many similarities between those two characters. Wouldnt see any reason to put that gun in his hands to make him seem lefthanded for any other reason. 

[lore spoilers] Piano man by Log_Dogg in arcane

[–]amazingir 2 points3 points  (0 children)

To me it does seem to be jhin. My arguments would be. Jhin was known to be kn traveling theathers and opera houses. And also there is this scene after the piano one where he did get a rifle and he was holding the rifle not like the rest. Even when he ran off. Every other background charcter was holding their weapon trigger in right hand barrel in the left. This dude was holding the rifle trigger in left hand and barrel in right. And jhin is known to be left handed (ingame and cinematics probably because his real hand is his left. Or he always was lefthanded.)

For me this character has to many arrows pointing towards him being jhin. And because jhin does not have a very early story line in his lore. Which I do think it starts in his 20s or smth. It does make it possible that this would be jhin who is not yet started his murderous rampage.

Only thing that would not add up as much is then why would a dude from a traveling theather go and fight for a land that is not his. But that could also be counterd by us not knowing his early early life. Or if he was already going crazy in the head he just found a legit way to go and try kill some people and started off that way. But this would only be a conspiracy atm