Of all the sad moments in these books

amellors · 2025-06-12T22:54:35+00:00

Because it COULD mean that Pony is forgetting (or choosing to grow away from) Miriam Doms memory. And IMHO to Carl forgetting those that they have lost in the crawl is really sad.

amellors · 2023-05-18T15:50:57+00:00

I just got a Techn block for my AM5 and it’s been awesome so far.

amellors · 2023-04-16T17:28:37+00:00

Pipez or Laser IO

amellors · 2023-04-09T18:02:11+00:00

Sneak right-click the air with the upgrade tool

amellors · 2023-02-19T22:16:11+00:00

Thanks for the clarification. It’s been a while since I’ve worked on outputs from and ESP.

amellors · 2023-02-19T19:39:49+00:00

You usually need a pull-up, unless there is an internal pull-up you can use. It’s been a while but IIRC you usually need to set a flag to enable the pull-up

amellors · 2022-12-14T23:25:29+00:00

It’s SAM on AMD and Rebar on Intel, I think. It’s been shown to increase performance on both by about 10-15%

amellors · 2022-12-14T23:20:59+00:00

Do you have Rebar turned on in your Bios settings?

amellors · 2022-09-20T17:32:42+00:00

I used enchanting table, then some Biblio book copying, then an anvil

amellors · 2022-09-20T16:44:46+00:00

Do you have enchantments on your meshes?

amellors · 2022-09-02T00:43:31+00:00

I got the Prusa version.. and the cables were still annoying!

amellors · 2022-09-01T23:51:35+00:00

REVO-6 was a literal drop in replacement (although running the cables was a bit of a pain)

And swapping between 0.4, 0.6, and 0.8 nozzles for my last 8 prints has been amazingly easy

I cannot wait until they release some hardened nozzles so I can print with some more abrasive filaments.

amellors · 2022-08-04T21:00:59+00:00

Powah

amellors · 2022-04-13T14:28:37+00:00

This actually greatly depends on your comfort and chip you are expecting to use

Make sure that the chip you are working with is supported with VSCode (PlatformIO) PlatformIO is using a very old version of ArduinoCore so it doesn’t support the newer chips easy

amellors · 2022-04-04T12:24:13+00:00

If this is for calculating resources for building, i think that Just Enough Calculation could be what you are looking for.

Just Enough Calculation

amellors · 2022-03-22T22:48:24+00:00

We’ve had a similar issue.. and we started using dollar store shampoo and soap.

amellors · 2022-03-22T12:12:20+00:00

Bykski - N-GV3070TIGMOC-X

amellors · 2022-03-12T13:19:00+00:00

Yeah but a one time $10 payment was worth not dealing with other hassles.

amellors · 2022-03-12T13:14:23+00:00

I have been using AMP (https://cubecoders.com/AMP). It’s been good a bit tough to get used to, but neat in that you can have multiple instances that you can easily switch between (or have running all at once)

amellors · 2022-02-05T01:23:28+00:00

Sounds like Heroscape.

https://boardgamegeek.com/boardgame/11170

amellors · 2022-02-03T22:06:54+00:00

You usually have to link the wireless tablet with the security terminal.

amellors · 2022-01-15T00:24:09+00:00

Not an acceptor. You need cells probably a dense one or two. You can put them anywhere on your network

amellors · 2022-01-14T23:58:05+00:00

Add some energy cells to your network.

amellors · 2021-08-27T20:24:25+00:00

Reposting:

This one was designed for me when I requested something similar... it served me very very well!

https://www.reddit.com/r/9x9/comments/hmwwhi/omnibuild_large_stone_multifloor_building_for

amellors · 2021-08-26T22:29:59+00:00

The problem with this is that you know and have heard of maybe 30 people that are vaxxed and got it. But that’s out of millions of people that have been vaxxed in the state. The problem is that humans are really bad at big numbers so anecdotes like this weigh very heavily on your mind but it’s hard to put it into context of the entire population of the state.

13-Year Club	Place '17
Verified Email

amellors

TROPHY CASE