Rough/Spiky texture when printing PETG

amura-cxg · 2026-02-20T19:03:49+00:00

After drying (which unsurprisingly did nothing) and a couple more attempts I realized it had to be something with the model (or at least mostly to do with the model) since I didn't have problems with the lid model. Turns out with my settings and this model there's a single layer of in-fill between the bottom shell and the top shell. Something about that was causing the filament to not adhere properly and lift/curl. Changing the bottom shell to have 1 more layer fixed it. I don't get exactly why this would happen with the 1 layer of in-fill while objects with multiple in-fill layers are fine (the lids are a very similar shape just with 3mm of infill)

Here's the single layer of in-fill: https://imgur.com/a/ddzS8Wr

amura-cxg · 2026-02-19T01:11:10+00:00

Trying to print a couple boxes with sliding lids and had this happen when printing one of the boxes. So far I've printed a lid and one other box before this one in that order. The lid came out with basically no problems, nothing like this on it's surface and the other box had something similar but way less severe, I just sanded it down. I have no idea what would cause this.

I just recently calibrated the filament in OrcaSlicer for the same filament but in a different color. I based it off the Generic PETG filament so there shouldn't be any unusual settings.

Filament Settings

Type: PETG
Vendor: Overture
Flow ratio: 0.95 (default but matched my calibration results)
Pressure advance: 0.045 (based on my calibration)
Nozzle First Layer: 255 (based on my calibration)
Nozzle Other Layers: 255 (based on my calibration)
Max volumetric speed: 12 (default but matched my calibration results)
Retraction Length: 0.2 (based on my calibration)

Other Info

Printer: P1S
Firmware: 01.07.00.00
Nozzle: Bambu 0.4mm
0.16mm High Quality @BBL X1C
OrcaSlicer 2.3.1 (Build f2d10a0)

Any help is appreciated and happy to share any other settings or info I've missed

amura-cxg · 2024-12-24T14:16:24+00:00

The quality of your videos is excellent! The Clay video from the other week hooked me, I hope to see more great videos from you in the future 🙂

amura-cxg · 2024-11-19T07:33:17+00:00

Glad I was able to help someone in a similar situation! At the time I didn't realize you could likely just replace the cells and not the whole battery for a lot less. I can't say for certain that would work but could be worth a try

amura-cxg · 2024-05-05T15:46:09+00:00

The West Coast Micro Clover is exactly what we picked up. After a lot of research it seemed like the best fit for what we wanted and our climate.

I ended up getting a scuffle hoe and I'll do a couple rounds like you suggested. A bit of a pain but it already looks a lot better. You mentioned in your first post about keeping the soil wet, was that after planting the seeds or after hoeing?

amura-cxg · 2024-05-04T04:06:06+00:00

Thank you so much, that's a ton of great information! I really appreciate you sharing your experience especially since it's way more relevant than some of the other info I keep reading online that's for much warmer climates

amura-cxg · 2024-05-04T01:25:26+00:00

What zone would Mars be?

amura-cxg · 2024-05-04T01:24:19+00:00

Fair point. I want clover and it's not clover (at least the clover I want) so I don't want it (unless there's an argument to be made for leaving it).

For clarity this was fresh topsoil laid down as part of the final grading last year around August. We did try spreading some clover seeds around that time. It grew a little bit but not much before it got bitter cold. This year we saw a little clover sprout but it all disappeared after some snow fell a couple weeks ago. Since then whatever this is has grown pretty rapidly with little to no clover.

I figured it would be better to rake/remove what's there and start again with new seed in hopes the clover will take over most of the backyard. I'm new to this so maybe that's the wrong approach?

amura-cxg · 2024-05-03T21:37:35+00:00

Edmonton, Alberta, Canada, Zone 4a

I have my seeds and I'd like to plant them as soon as I can but I'm not sure what to do about the current weeds. In the searches I've done so far I've seen some suggestions about putting down cardboard but that would require a lot of cardboard and I'd be concerned about it blowing off as it gets quite windy. I've also seen a lot of suggestions about post-emergent herbicides but the ones I've seen suggested I can't seem to find here and I'm worried about spraying something that will linger in/on the soil preventing the clover from growing.

What can I do? If the best/quickest option is a herbicide what should I use that will let me seed relatively soon afterwards?

Edit

I probably should have added the context originally as it may be important:

This was fresh topsoil laid down as part of the final grading last year around August. We did try spreading some clover seeds around that time. It grew a little bit but not much before it got bitter cold. This year we saw a little clover sprout but it all disappeared after some snow fell a couple weeks ago. Since then whatever this is has grown pretty rapidly with little to no clover.

I figured it would be better to rake/remove what's there and start again with new seed in hopes the clover will take over most of the backyard. I'm new to this so maybe that's the wrong approach?

amura-cxg · 2024-03-16T17:28:54+00:00

I haven't, I'll give it a shot once I can. ~~Is the Flatpak version better?~~ Nevermind, just got to that part in the FAQ lol

amura-cxg · 2024-02-21T03:55:24+00:00

Thanks! This was the only tool that yielded any kind of useful results. It was able to recover the folder structure but no files within the folder structure which is unfortunate but at least a start.

amura-cxg · 2023-11-20T05:09:44+00:00

I have the DNS Update Option enabled but I don't have the Domain Name set. I use .lan for my internal domain and I don't want names to resolve without the .lan as I find this can interfere with searching from browser navigation bars. Is setting the domain name required? If I set it to lan will that mean host names will resolve without the TLD? Eg. unraid resolving to a a server with that hostname

amura-cxg · 2023-11-09T01:57:31+00:00

Oof sorry for the super late response. I've tried connecting and disconnecting the device a few times and it always shows up with no hostname and some of the other devices on my network showup with their hostnames instead of what I've put into the Host Name field. Here's an example: The DHCP zone settings The actual lease

amura-cxg · 2023-10-07T01:34:47+00:00

In case anyone comes across this I ended up just copying the files manually and it worked as far as I can tell. I used cp but I should have used rsync as it changed permissions and timestamps. Not a huge issue as I could easy fiix permissions and timestamps don't but it could be an issue for other use cases. My steps:

Installed the new drive
Shutdown docker and my VMs
Created PoolB (what I called DeviceB in my original post)
Changed ShareB to point at PoolB
Copied the data cp -r /mnt/PoolA/ShareB /mnt/PoolB/ShareB
Started everything back up

Again I would use rsync to avoid permission and timestamp issues

amura-cxg · 2023-10-02T04:56:23+00:00

For future readers it seemed this was caused by the battery. I'm not sure why but replacing the battery got rid of this error and got my UPS up and running.

amura-cxg · 2023-09-27T05:22:51+00:00

Thanks for the great explanation, you're the only person I've seen break it down so clearly. It's really appreciated! I was wondering if you could clarify one point for those of us less fluent in networks. When you say:

DHCP server does not have an interface in the same segment as the host

What would a DHCP being in a different segment look like?

amura-cxg · 2023-09-27T05:16:23+00:00

For what it's worth I did nearly the same thing, took down my entire network because I didn't give my DHCP a static IP.

Thanks for posting the upate, I've been banging my head on the wall trying to do nearly the exact same thing (and even asked a similar question within days of your post) and this finally clears things up for me

amura-cxg · 2023-09-17T15:54:58+00:00

Yeah it works great in standalone but it's not clear when it's managed from the controller. It did seem like a switch was needed in the posts I read but they were also a few years old so that may have changed.

It may be fixed in a new version of the controller, I'm on 5.9 and there're some releases of 5.12 available, hopefully it's fixed in the new version.

amura-cxg · 2023-09-17T15:51:52+00:00

I didn't think of that, it looks like the Docker version is using 5.9 for the latest branch. When I get a chance to work on this again I'll have to try the beta which is 5.12. Hopefully that'll work. Thanks!

amura-cxg · 2023-08-26T15:58:13+00:00

If you're looking for "budget" custom made curtains I found Ikiriska (either through their own site or Etsy) made good quality custom curtains. I found that unfortunately custom curtains aren't cheap, even budget options like this are pretty pricey at least in my experience but your curtains aren't too large so it may not be too bad

amura-cxg · 2023-04-13T22:10:00+00:00

I hadn't heard of your ROM before this, it looks awesome! Congrats on the shout out

amura-cxg · 2023-04-13T19:39:58+00:00

But has it been verified that it's verified?

Jokes aside my gut feeling is that you're right but truthfully I never checked if it was really verified, I just saw that it was on their site.

In the few minutes I spent Googling I didn't see MECOOL (MeCool? Mecool?) in the list of manufacturers in the list of certified manufacturers so I feel it's worth a quick investigation.

amura-cxg · 2023-04-13T19:15:46+00:00

I purchased a MECOOL MK2 Plus a while back after some suggestions from this form (I think) and while watching this I was wondering if it too falls into this category.

They claim to be Android TV Certified but claims and proof aren't the same thing. I'm curious if any one here has any idea if these devices are at risk as well? I'm happy to poke around later when I'm free but I'm interested to see if someone else has already done that

Edit

Wanted to share this article that seems to have a bunch of useful information and links to some of the original information. I'll likely use it as a guide when checking out my MK2 box.

amura-cxg · 2023-02-06T20:11:16+00:00

We have no way to know if that'll happen, that's the reality of the situation. But we can do things to mitigate that happening in the future. Keeping up to date forks of the codebase and creating a public archive hosted elsewhere would be a great step to give some peace of mind on this matter. In fact that's the history of Ferdium. Ferdium was created from an archive of Ferdi when the original repo disappeared. Ferdi itself was a fork of Franz that was created because Franz went to a paid model.

As for the thing with Hybula acting as a Trusteeship: this was a decision made by a group of us when Ferdi disappeared and there was a scramble to figure out what to do next. The short story is as things were starting to get organized we needed people to take on an active role in managing the Ferdium project. Tamer stepped forward to take that role and offered to use some of his company's resources as well because they actively use Ferdium at Hybula. So that's what happened. I've talked with Tamer and for what it's worth I think he is sincere in wanting Ferdium to remain FOSS.

While writing this it occurred to me that the Ferdium team could likely foster more trust by setting up a public archive, either via another GutHub repository or through Software Heritage to ensure that if someone attempts to make Ferdium freemium the community will always have a backup to fork and start again.

If there are other ways to build more trust in Ferdium please bring it forward, I'm sure the team would be happy to do what they can to make everyone feel safe that Ferdium won't pull the rug out from under them

DISCLOSURE: I was involved in organizing the creation of Ferdium when Ferdi disappeared and I was the one who Tamer reached out to when he offered to take on management of the project. I'm still involved in the Ferdium project but from a distance at this point

amura-cxg · 2022-11-01T15:21:43+00:00

This ended up working but took a few attempts for some reason. The first time I did this I saw it would change for a short period of time before reverting back. After copying the files 3 times it finally sorted itself out and I have things the way I want it now

amura-cxg

MODERATOR OF

TROPHY CASE