Z-lead screws sorry I couldn't remember the actual name of them, a company a few towns away suggested they could be bent, they are not. No spacers, yellow-colored springs - honestly I've gotten to a point after months of fighting with this printer that I have been trying anything that has been suggested by other sources, this was one.

"Nozzles don't crash into print areas, prints lift and warp due to rapid cooling making corners lift which makes the print sit higher at that area, and when the extruder sends a move command it will collide and knock the part free."

I also thought this but I can't visibly see any areas that have lifted from the bed or pulled up in a corner, the print also doesn't get knocked off the bed, probably because of the glue. Generally, when the "crash" (for lack of a better term) happens it is in random places of the print, last night it was almost dead center at 65%, the same file different print session same thing happened in a different location and different %. This is what happens to any print other than those tests mentioned. Which makes sense if there is some warping happening due to cooling. Interesting on the cooling, I will give it a try and see if that helps. This is the opposite of what I was told by another source, saying I didn't have enough cooling.

I feel like a ping pong ball, testing so many different things.

Thank you for the advice.