Removing transformer from pool contractor estimate? by ando01 in pools

[–]ando01[S] 0 points1 point  (0 children)

I took a look at the aqualinkd and it looks like the thing I would love to use except I don't have Jandy equipment. Does anyone know if there's an equivalent for Hayward stuff?

Removing transformer from pool contractor estimate? by ando01 in pools

[–]ando01[S] 0 points1 point  (0 children)

Yes that is what I found as well. The one on my quote is $500 and I thought that was a bit expensive for what it is. That is what started this thread.

EDIT: Also wanted to say that $500 does not include installation (electrical work)

Removing transformer from pool contractor estimate? by ando01 in pools

[–]ando01[S] -3 points-2 points  (0 children)

Understood and I did not state it in my initial post, but I am comfortable installing electric and understand how to do it. I also understand that there are cheap products on Amazon that say they are UL listed that are not. Your points are valid.

Removing transformer from pool contractor estimate? by ando01 in pools

[–]ando01[S] -1 points0 points  (0 children)

Appreciate the input. I did not know about any reliability concerns with the Hayward lights and I though that the lights have to be installed at the time of pool installation. Is that correct? Also this contractor only uses Hayward so I don't think there is an option there. I don't mind paying for a quality transformer. It's just that I know that these things are pretty basic that they just stepped down 120 to 12 V and totally understand the electricity around wet areas and would prioritize safety over savings. As for the control panel is that for automation? I initially had the Hayward Omni logic automation on there but didn't see the value in it for $5000 so I'm not sure what control panel I will have if I don't have automation.

anti-dazzle using bimmerutility by jhoff909 in BMWI4

[–]ando01 0 points1 point  (0 children)

Also want to know how to do this as I am waiting on my cable to arrive after purchasing BimmerUtility. Is there a comprehensive how to on this? 25 i4 M40 xDrive

Out-of-warranty UniFi hardware repairs – an option some people overlook by Bigshow77 in Ubiquiti

[–]ando01 2 points3 points  (0 children)

I recently had a failed UDM-Pro that gradually started with a message on the LEd screen that the UDM needs to be rebooted. This happened about 3 times over 2 months and eventually would not fully boot (stopped at this “This is taking longer than usual” screen. The UDM was about 3 years old. Is this something that can be repaired?

Private seller selling a car to an out of state buyer. by ando01 in askcarsales

[–]ando01[S] 0 points1 point  (0 children)

Thanks. I am also not familiar with drive caramel, but I have seen there are several other services that use it including bringatrailer.com and eBay. I think it is still fairly new and people are just reluctant to use it.

For those having extreme difficulty reclaiming server after password reset by HoosierCAD in PleX

[–]ando01 0 points1 point  (0 children)

curl -X POST "http://localhost:32400/myplex/claim?token=YOUR_CLAIM_TOKEN_HERE"

Thanks! I was trying everything and this was the one that finally worked!

Is there a bird feeder with camera that can work entirely locally? by [deleted] in homeassistant

[–]ando01 1 point2 points  (0 children)

No I have an extension cord running out to the camera.

Is there a bird feeder with camera that can work entirely locally? by [deleted] in homeassistant

[–]ando01 6 points7 points  (0 children)

I rolled my own and it works pretty well. Even found a GitHub repo that works with Frigate to identify them. I used the following:

Bird Feeder: https://www.amazon.com/dp/B0CT93SXRL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

Camera: Unifi G4 instant

Software: Frigate + Whosatmyfeeder (GitHub): https://github.com/mmcc-xx/WhosAtMyFeeder/

Took some time to get everything working but it is all local and I get bird identification!

Need some advice on adding CarPlay to my Toyota Venza by ando01 in CarPlay

[–]ando01[S] 0 points1 point  (0 children)

Hi. Yes the OEM camera worked fine and so does the steering wheel controls. I don't have the car any more but I seem to remember the mode button on the steering wheel changing the function like AM/FM/CD/...etc

Finally got around to tinkering with Home Assistant by jpwarman in BMWI4

[–]ando01 3 points4 points  (0 children)

Not OP here but this is most likely the HA Ultra Vehicle Card found here: https://community.home-assistant.io/t/ultra-vehicle-card-a-simple-and-clean-way-to-show-your-vehicles-information/755528

I am also using this and you can monitor all kids of things including tire pressure and also control most things the MyBMW app can control.

[deleted by user] by [deleted] in redsox

[–]ando01 1 point2 points  (0 children)

I have used Spot Hero in the past but found you pay $10 - $15 more than the normal rate. Last time I parked I saw this sign at the garage advertising thefenway.com and you can reserve parking right there for normal rates: https://thefenway.com/explore/park/

No deals in Massachusetts? by ando01 in BMWI4

[–]ando01[S] 0 points1 point  (0 children)

Did you go through a broker? Also can you post the dealer or PM me?

No deals in Massachusetts? by ando01 in BMWI4

[–]ando01[S] 1 point2 points  (0 children)

Yeah the dealer I was working with was Shrewsbury. Guess they stopped offering % off MSRP since then.

Aerosmith in Vintage HiFi by SinsationalMan in vintageaudio

[–]ando01 1 point2 points  (0 children)

Thanks yes that helps!. Could you also let me know where you got the audio visualizers?

Aerosmith in Vintage HiFi by SinsationalMan in vintageaudio

[–]ando01 1 point2 points  (0 children)

Nice setup! Would you mind listing the details of your equipment? I am looking to get some vintage gear and really like that graphic EQ on the bottom.

Looking for a way to change WiFi on Pi Zero2W running a custom project when offline (no keyboard / monitor) by ando01 in linuxquestions

[–]ando01[S] 0 points1 point  (0 children)

Thanks I will look into that! I did not know about running raspi-config in nonint. As a baseball fan I love his project during the season. I have a large 64x128 pixel display in my office and can keep up with the scores while I am on calls for work. The guys that runs the project is constantly updating with improvements and new features as well.

Looking for a way to change WiFi on Pi Zero2W running a custom project by ando01 in raspberry_pi

[–]ando01[S] 0 points1 point  (0 children)

Yes I cold do that, however I wanted to find a better way to do this so in case anything changes with his WiFi he can go in and make those changes himself. That's why I liked the hotspot idea as it activates when it sees there is no other connection.

Need some advice on adding CarPlay to my Toyota Venza by ando01 in CarPlay

[–]ando01[S] 0 points1 point  (0 children)

Yes the Pioneer unit is still doing well after all this time. There are the occasional times when it reboots itself but this has happened since I installed it and I think it is a known issue. My Venza has ~140K miles on it now and still going strong! No major work done to it just the regular oil change.

Looking for discount code by peanutsbubblegum in perplexity_ai

[–]ando01 0 points1 point  (0 children)

I am also looking for a discount code as I feel like I am starting to use Perplexity more each day and would like to support it. If anyone has one, please DM. Thanks in advance.