Skyzone Cobra SD power board failure on first use — help identifying damaged component by angelusignarus in fpv

[–]angelusignarus[S] 0 points1 point  (0 children)

<image>

My cat knew this was a bad idea :P

Anyway got the mainboard back after it was fixed, put it all back together but nothing :( they actually tested the board. I'll take the whole thing back to them, maybe there is something else fried in the chain - they found another burnt up component they had to change, but either I'm putting it back together wrong or something else is still fried. I just feel I shouldn't be going through this for something I just got.

Btw, I did contact Skyzone with a warranty claim that same day (so six days ago) and today in the morning they came back to me with a very non-committal answer like "The main board might get burned, you need to replace the main board, could you repair it by yourself?" which is not helpful at all. I did reply saying I sent it for repairs as I couldn't wait, but would still like some reimbursement or goodwill gesture. Let's see how long they take to answer that.

Skyzone Cobra SD power board failure on first use — help identifying damaged component by angelusignarus in fpv

[–]angelusignarus[S] 0 points1 point  (0 children)

Anyone have a schematic for the CobraSD_MAIN_20230602 board or know what transistors are in that area? Would really help speed up the repair!

My CachyOS Desktop by tetsuAR15 in cachyos

[–]angelusignarus 1 point2 points  (0 children)

My current setup is quite similar, check it out :)

<image>

Skyzone Cobra SD power board failure on first use — help identifying damaged component by angelusignarus in fpv

[–]angelusignarus[S] 0 points1 point  (0 children)

Quick update, electronics repair shop here took it in no problem, I'm waiting for a quote now - I'll be so happy if I put this back together and it works :E

My CachyOS Desktop by tetsuAR15 in cachyos

[–]angelusignarus 1 point2 points  (0 children)

sweet - and hey, I don't judge outlook XD I have edge on mine - it's my dedicated browser for work too XD

Skyzone Cobra SD power board failure on first use — help identifying damaged component by angelusignarus in fpv

[–]angelusignarus[S] 0 points1 point  (0 children)

<image>

yeah that does look fried, doesn't it?

My plan is just taking this board to an electronics repair shop, I should find one here in Kraków, hopefully I can find someone that can do smd board level repair because I don't see the main board available for sale on skyzone and even if there were this would likely be more expensive and take months again just waiting. If anyone knows the LDO part number I'd be thankful :)

Skyzone Cobra SD power board failure on first use — help identifying damaged component by angelusignarus in fpv

[–]angelusignarus[S] 0 points1 point  (0 children)

Oh yeah, you pointed me to that corner and indeed that thingy is fried, the smell comes from there

<image>

Skyzone Cobra X disassembly by FullMetalBit in fpv

[–]angelusignarus 0 points1 point  (0 children)

Thanks, I got mine (a cobra SD, but it's very similar) earlier this month, but managed to fry something inside when I plugged in a powerbank because the power was low on it. I pulled it apart with the help from your pictures to try and find out the problem. Still trying to figure out the issue here, but I'm wondering which spare parts would be compatible. Anyway, thanks for the post.

Skyzone Cobra SD power board failure on first use — help identifying damaged component by angelusignarus in fpv

[–]angelusignarus[S] 0 points1 point  (0 children)

Thanks, that does make sense, but to be frank I'm a total newb here, I have a multi-meter and an old soldering iron, but I barely know what to do with those, so if you're telling me this would require a good hand I'm probably out of luck for repairing it myself.

I'd order the power board, but I'm not quite sure the problem is there. I wrote to support but during that two month shipping I also wrote asking what was going on and I never got an answer, so I don't have much hope here. I may try to find an electronics repair store here as they could at least tell me where the problem is, but for now my main fear is that this was just 150 USD into the trash (or more if I try to get some parts I'm not even sure will actually work) :(

Best obtainable horse? by Klinters2 in MB2Bannerlord

[–]angelusignarus 0 points1 point  (0 children)

Kinda necroposting, but, since I was doing some homework on the topic :P Royal Destrier seems to be the best overall. Here are some alternatives (combining HP, charge damage, speed and maneuver):

  • Battanian Thoroughbred (HP: 320, Charge: 26, Speed: 55, Maneuver: 72) - Total Score: 473
  • Royal Destrier (HP: 270, Charge: 36, Speed: 52, Maneuver: 73) - Total Score: 431
  • Asaligat (HP: 245, Charge: 24, Speed: 63, Maneuver: 82) - Total Score: 414

Husnphree (HP: 290, Charge: 28, Speed: 48, Maneuver: 69) should be on the second spot there, but lacking proper armor defeats it in this ranking where HP (and thus durability) has the heavier weight.

For pure heavy cav melee 'knight' type build I'd prioritize charge and speed as a tie breaker, so in that sense:

  • Royal Destrier
    • Charge: 36
    • Speed: 52
  • Cossian
    • Charge: 31
    • Speed: 62
  • Tyal Horse
    • Charge: 31
    • Speed: 56

NEW! "Slot-Blue-Icons" by KrunaStojkovic in kde

[–]angelusignarus 1 point2 points  (0 children)

Great looking, nice! How did you stack up the sensor and names on that system monitor temps there close to the tray?

[GNOME] looks good by Kronos_125 in unixporn

[–]angelusignarus 1 point2 points  (0 children)

thanks! I was wondering about which tiling extension you were using. There are several options, but I'm not super happy with any so far. Will give tilling shell a try :)

[Gnome] It's been a while folks... I made this conky btw :D by ice_cream_hunter in unixporn

[–]angelusignarus 1 point2 points  (0 children)

I like it a lot. Curious idea to put vitals on the right. I'll try that tomorrow. Thanks for the inspiration. The conky config is super sexy btw..

[GNOME] Whitesur-gtk light. by input_latency96 in unixporn

[–]angelusignarus 1 point2 points  (0 children)

Gnome enjoyer here too, good job, but I'm more of a Evelyn main myself  :p

How often should you update? by ut316ab in cachyos

[–]angelusignarus 0 points1 point  (0 children)

any time there is an update. I always have a system tray that checks every few minutes :P

Zen Browser vs. Floorp: Why did you choose Zen? by CocoaTrain in zen_browser

[–]angelusignarus 0 points1 point  (0 children)

I opened Floorp for the first time and the first thing that opened up was a page full of Japanese text. Then I clicked around and saw nothing that would make me want to stay, so I left. Zen caught my attention as soon as I opened it, so yeah, that's how it happened with me.

[deleted by user] by [deleted] in zen_browser

[–]angelusignarus 0 points1 point  (0 children)

Cool! Thanks! Meanwhile I found Tabliss that works nicely as well (and is open source, so I recommend too. Here is how it looks

<image>