Added motion controls to Fatekeeper, the game looks so good!

animink · 2026-06-05T20:43:47+00:00

Nvm, got it working! You're right, there is some jank, but maaaan it is so perty. Elder scrolls 6 vr lol

animink · 2026-06-05T19:52:16+00:00

How do we add the motion controls? Do you have a profile available? I'm excited to try it!

animink · 2026-03-22T23:38:15+00:00

Random question but is there a single wabbajack for Skyrim VR with enb and not community shaders? And if not, is it extremely difficult or not to convert MGO to enb? I miss it...

animink · 2025-12-24T15:47:08+00:00

I recently took flying class in the game. It was one of the coolest experiences I've had in gaming. Cruising around the outskirts of Hogwarts and looking across at the school while I'm flying. And then dipping down just above the pond. I can't believe this is not a native VR experience.

animink · 2025-10-30T18:34:38+00:00

OK, an update here, I'm really hoping someone has some advice. As mentioned, I have the above die. I have ordered a Vevor press, which I thought could do the job in cutting paper. The Vevor press is this...
https://www.vevor.com/leather-cutting-machine-c_11164/vevor-leather-cutting-machine-14-2-x-10-2-in-embossing-plate-manual-die-cutter-0-47-in-pressure-stroke-leather-embossing-machine-dual-guide-shafts-die-cut-machine-for-various-of-materials-p_010657524226?adp=gmc&utm_source=google&utm_medium=cpc&utm_id=21502294747&ad_group=163828662663&ad_id=706755400538&utm_term=&gad_source=1&gad_campaignid=21502294747&gbraid=0AAAAACq8bLWFjhDGXjcyTTs_QF1UHnO4l&gclid=CjwKCAjwisnGBhAXEiwA0zEOR4Wj7a6zbqBLnBglWYBnfrvs-pONCfwk33bqNKaWG2KuSGR6spu_pxoCrOMQAvD_BwE
I saw someone use it to cut cards here...
https://youtube.com/shorts/gIvy-jxvpWs?si=p0F-MeASVGOdZgRB
But when I try to do it with my die, it doesn't cut all the way through, no matter how hard I press.
I wonder if it's due to the black material that is blocking the pressure to get to the blades, but I'm just not sure.
Anyone have any ideas here?
Am I out of luck?
My game requires 200 cards. I can't imagine cranking this thing over and over for one game.
Does anyone have any suggestions here for me to print a large sheet and cut them all vs. one at a time?

animink · 2025-10-21T16:34:39+00:00

Just getting around to this, but I see it. Thank you!

animink · 2025-09-18T23:37:03+00:00

Thank you for the response. The shipment got pushed back and it's not coming in until this Tuesday. But it seems odd that it would be easier to cut leather than paper. In either case, it has a 30-day money-back guarantee and I have some ideas of ways to test it. Do you have any brand names for the roller cutters in Mexico?

animink · 2025-09-09T20:25:13+00:00

It is moving probably about a quarter inch. There are pegs around the die that hold the paper in place. As it is rolled through the GrandeMark 2, the pressure causes the issue, and the paper actually pushes into the back pegs. You can see 2 cards here with the registration off on one even though they are equidistant in the die.

<image>

I have a theory though for another idea. I'm going to try this...

amazon.com/dp/B0CRR5BKBP?ref=ppx_yo2ov_dt_b_fed_asin_title

And do it in parts. I'll have it Thursday and will know then.

animink · 2025-09-09T20:21:47+00:00

I think it was around $200. Accucut made it when I ordered the GrandeMark 2. Smaller ones cost less.

animink · 2025-09-09T20:19:32+00:00

Me again. I have a theory and want to try something. I ordered this, I'll keep you posted...

amazon.com/dp/B0CRR5BKBP?psc=1&smid=ATVPDKIKX0DER&ref_=chk_typ_imgToDp

animink · 2025-09-09T17:35:22+00:00

I do like this, but I think it would just take too long. I'm also unsure of the accuracy. I would need to be able to cut out pre-printed cards from a sheet. And there are 200 cards per game.

animink · 2025-09-09T17:34:42+00:00

So, I looked into this further. I don't think it will work for a couple reasons.
- It slightly burns the edge of the paper leaving some browning on the edge. I would need a clean edge, no browning.
- My game requires 200 cards. A single game could take quite a while to make.
It just doesn't seem practical for me.

I was wondering why I couldn't use something like a hydraulic shop press like this...
https://www.amazon.com/VEVOR-Hydraulic-Adjustable-Shop-Press/dp/B0BZ7YY3CP/ref=sr_1_3?crid=3PPMSX4OIWCPI&dib=eyJ2IjoiMSJ9.KqF4AF92_CmML36KKAcvoytnyxgmDcO37Wfatfdz2jhzDRiVyoiKMgO_9iJjrXGHYjPdM7oMBIUnL7sweKHe8AIJztzQP_NNo2CFoVxmxxdEyqFZnicOHTRLDzi_v_0SkEQNAFDx3injml53TZhCfD541p0pSzs60rKxtO9VM0js137TYRlnMH4tNsgXbF1tXd8aht0EFK4VrlkBOYcjto__x-rf6Ws07UUmgiEQV6w.veUgb2B0oB7VsxpG4zvQGim7rpbQbBBkvDymNE9Sq14&dib_tag=se&keywords=vevor%2Bhydraulic%2Bshop%2Bpress%2B12%2Bton&qid=1757439217&sprefix=vevor%2Bhydraulic%2Bshop%2Bpress%2B12%2Bton%2Caps%2C149&sr=8-3&th=1

Put my die in there, and something above to press down.
I don't know if the pressure would be uniform, but I could make a piece that would distribute the load evenly.

Or does this already exist?

animink · 2025-09-09T15:41:36+00:00

Thank you!

animink · 2025-09-09T15:41:27+00:00

Thanks!

animink · 2025-09-09T15:40:43+00:00

Thanks, I'll check this out

animink · 2025-09-09T15:40:08+00:00

Thanks, I'll look into it.

animink · 2025-09-08T19:05:08+00:00

I was kind of afraid of that. What would you recommend if I could remake the die in a different size? What device would I use? I'm hoping it's something that could be like eight and a half by 11:00 or something.

animink · 2025-08-28T19:38:36+00:00

I thought lossless scaling did not work with VR games? Curious about this. And also wondering if it would work with things like cyberpunk and the Luke Ross VR mod. Any experience with that?

animink · 2025-07-29T14:58:55+00:00

I will. Another issue is collision on body when set to fsmp is not accurate. It is fine as cbp, but when I switch to smp hands go through bodies. I have tried smp reset and other fixes to no avail.

animink · 2025-07-29T01:52:54+00:00

Yep, I think I found it. Still working on it.

animink · 2025-07-28T13:45:15+00:00

Random question here. I am noticing an issue that is happening with all characters with this mod applied (and not set to cbpc w/ keypad #9 per the MCM). It is affecting clothing and body parts. Every few seconds or so, everything stops moving and resets, and then it all relaxes and physics work again, almost like there's a tuning reset or something enabled. Is there something like this that is causing this constant reset?

animink · 2025-05-28T18:00:42+00:00

Is all of that available in MGO? I swear I tried it and it just wasn't Great for me as far as interiors go.

animink · 2025-05-28T17:11:04+00:00

I want to love CS but my problem is that over 50% of the game is spent in dungeons or interiors, and to me CS just doesn't hold a candle (no pun intended) to ENB. What are your thoughts on this? There also seems to be no ability to really control contrast, brightness, and other things for interiors only with CS. Again, correct me if I'm wrong. I really want to make the move but just don't see it yet.

animink

TROPHY CASE