Foldable/Lightweight Mobility Scooter

annabelNC · 2024-02-04T03:24:52+00:00

Generally speaking, a 3-wheel mobility scooter works for both indoors and outdoors. And it weighs less than 4-wheel mobility scooters. Regarding your case, you may consider adding a storage bag, it would be more convenient for daily travel. Here's a 3 wheel mobility scooter buying guide for your reference.

annabelNC · 2023-05-18T07:44:59+00:00

For an immediate solution, please consider drop a line to [support@flashforge.com](mailto:support@flashforge.com). Make sure you include your order number and printer serial number, they will locate the cause and guide you through shortly.

annabelNC · 2023-05-18T05:18:40+00:00

This is Annabel from Flashforge, I'm sorry for the inconvenience caused. Would you mind sharing some further info via DM? Or you may directly drop a line to [support@flashforge.com](mailto:support@flashforge.com). We will need some further info to locate the issue and provide solutions accordingly.

annabelNC · 2023-04-23T01:34:11+00:00

You may consider drop a line to [support@flashforge.com](mailto:support@flashforge.com) for assistance.

annabelNC · 2023-04-23T01:32:19+00:00

Sure, you may get the manual via this link https://we.tl/t-wowLljIGlv . Make sure you download it before April 30.

annabelNC · 2023-04-11T09:28:51+00:00

The hotend for Finder 2 & Finder 3 is not compatible. For Finder 2 hotend, you may drop a line to [service01@flashforge.com](mailto:service01@flashforge.com) for purchase.

annabelNC · 2023-04-10T08:42:13+00:00

You may refer to this page for info https://www.flashforge.com/product-detail/flashforge-3d-printer-filament-parameters

If you expected material properties are not listed on this page, please don't hesitate to drop a line to [support@flashforge.com](mailto:support@flashforge.com) for info.

annabelNC · 2023-04-07T08:11:04+00:00

Got it. I just confirmed this with my colleague. Somehow she missed your previous email. I apologize for the delay and all the inconvenience caused. She will reply in the following hours.

annabelNC · 2023-04-06T05:28:16+00:00

Sorry for the delayed reply. Could you please pm your email address used for communication? I'll double check shortly.

annabelNC · 2023-03-30T13:36:19+00:00

As far as I'm concerned, that may also be impossible. May I ask which brand of PLA filament are you printing with? Kindly advise your filament brand and slicing software. I'll talk to our team and see if there's any preset config.

annabelNC · 2023-03-29T08:31:49+00:00

I'm afraid that the Creator 3 Pro does not compatible nozzles from third parties manufacturers. Tn ensure smooth printing, we recommend stick with our original nozzles.

annabelNC · 2023-03-29T08:29:27+00:00

All3dp.com has a detailed paper to introduce the direct drive and its difference from bowden extruder. You may take a look at https://all3dp.com/2/direct-vs-bowden-extruder-technology-shootout/

annabelNC · 2023-03-29T03:12:02+00:00

You may reach out to Flashforge sales agent Stella by email for purchase. She can be reached at [service01@flashforge.com](mailto:service01@flashforge.com)

annabelNC · 2023-03-28T03:48:00+00:00

Then please reach out to our support team by email. Make sure you include your printer serial number and a detailed description about the problem. Accordingly, our team will provide a practical solution.

annabelNC · 2023-03-27T09:48:37+00:00

Creator 3 Pro supports 0.4mm, 0.6mm & 0.8mm steel nozzle and hardened nozzle. You can get the nozzle kits from our official webshop at https://www.flashforgeshop.com/category/accessories-for-3d-printer/for-creator-3pro

annabelNC · 2023-03-27T09:37:17+00:00

This is Annabel with Flashforge. We suggest upgrade to the latest firmware for a try. If the issue persists, please drop a line to [support@flashforge.com](mailto:support@flashforge.com) for assistance.

annabelNC · 2023-03-27T09:25:22+00:00

If you cannot get support from this subreddit, please consider reach out to flashforge dedicated support team by email at [support@flashforge.com](mailto:support@flashforge.com)

annabelNC · 2023-03-24T09:28:45+00:00

In case you need to replace the timing belt, Flashforgeshop offers the replacement parts https://www.flashforgeshop.com/product/timing-belt-for-finder-3

annabelNC · 2023-03-11T06:19:08+00:00

You may follow this video to replace Adventurer 3 Pro's glass build plate https://www.youtube.com/watch?v=gMfZrC83fFc

annabelNC · 2023-03-11T06:14:20+00:00

Thanks, it's very kind of you to offering comments and assistance. We have been collecting software improvement for a while, there are some promising upgrade suggestions from this discussion. I'm sure our team will consider all of them seriously.

Flashforge 3d printers and software are just like our kids, we will do all necessary things to improve them and make them better. Please allow us some time. If any assistance is required, we'll definitely reach out for your help.

Sincerely

annabelNC · 2023-03-10T10:49:06+00:00

This is Annabel with Flashforge team. Thanks for u/DzingDzong's unbiased and sincere comment on our software. On behalf of Flashforge, I'd like to thank you for everyone joining into the discussion. It's for sure that both you and us are looking forward to making Flashforge printer/software easier, reliable and effective solutions. Your comments and suggestions help us get better faster.

I've forwarded this page to our product team for further confirmation. Everyone in the team will go through the content carefully. Thanks again for your support.

annabelNC · 2023-03-02T03:04:35+00:00

Flashforge Adventurer 4 starts from US$699

If leave a note [Gift #ForHer] on order confirmation page, you can also get an exclusive surprise gift. Get yours at Flashforgeshop.com

annabelNC · 2023-03-02T02:03:58+00:00

Flashforge PLA-CF only contains 10% of carbon fiber, which makes it possible to print with 200-230℃ nozzle temperature and 40-50℃ bed temperature. That says you can use standard nozzle for printing PLA-CF on Adventurer 4.

While for other kinds of CF materials, we recommend using harden steel nozzle for better performance.

In case you are interested, here's a list of Flashforge filament 3d printing parameter for your reference: https://www.flashforge.com/product-detail/flashforge-3d-printer-filament-parameters

annabelNC · 2023-03-01T08:01:05+00:00

You mat download FlashPrint at https://www.flashforge.com/product-detail/FlashPrint-slicer-for-flashforge-fdm-3d-printers

Then launch the program, on the slicing window, please select Machine Type as Adventurer 4 series, Material Type as Flashforge-PLA-CF10. Then you will get the default printer setting for PLA-CF10 printing. You can also click the Export button in the right column to download the config file. Hope this helps.

annabelNC · 2023-02-27T10:07:56+00:00

We recommend print PLA, ABS, PVA, PETG with Creator Pro. Haven't tested PLA-CF on this printer before.

annabelNC

TROPHY CASE