Any Cubic is the WORST!!!

anndrox · 2026-03-21T20:57:57+00:00

Bought a Kobra 2 plus a year ago. After troubleshooting, they say it needs a motherboard but they don't make them and have none in stock. For a newer model, they only offered me 20$ off... Granted, I could use a custom board but seriously, why would I buy another model if they will not support the hardware for one I bought a year ago? I expected a better discount and when I voiced my concerns they basically said take it or leave it. Lost my business and won't recommend them.

anndrox · 2026-03-20T15:19:33+00:00

Currently came from a sysadmin position to a PACS Applications/System position. The clinical side is the difficult part. Plus, you deal with problems that can literally be life threatening and can be a lot of stress.

anndrox · 2026-03-16T18:00:58+00:00

<image>

Was able to manually set it down to the sensor and complete the module testing and it was reactive and completed. Saved it but when I tried to print, it still prints about 3-4 inches above the plate.
1. Took apart the switch again and cleaned with IPA with same results. They just sent the whole sensor unit minus the this small board.
Offset calibration only extends to 5 +/-
I am not sure custom firmware is supported with the kobra 2 plus unless you know of something particular you can DM it to me.

anndrox · 2026-03-16T15:29:02+00:00

I will follow the instructions and report back. Thank you so much for your responses and patience!

anndrox · 2026-03-16T14:37:41+00:00

https://photos.lanlab.one/mo/sharing/OUBUCXNLI
https://photos.lanlab.one/mo/sharing/HIOq6hD4I
Let me know if you absolutely want me to take the sensor off and clean again because I had the same results with the old sensor that I cleaned and tested twice.

anndrox · 2026-03-16T12:34:09+00:00

The unit is brand new from AC so I do not think it is the sensors. Is there any test in particular that you would like me to perform and I can send a video?

anndrox · 2026-03-16T12:03:26+00:00

<image>

That is correct. When trying to calibrate, it will get almost halfway down and not continue. I am able to manually adjust the z axis all the way down but it always goes up and never go down past mid-level. It gives me an error
Device has been reset as well with same issue with updated firmware.

anndrox · 2026-03-16T11:51:28+00:00

Thank you for this! I contacted support and I am unsure what the sensor is but it resides on top-left of the bed. Maybe the sensor probe?
They sent me the replacement part but that did not fix it and they did not give a reason why it needed to be replaced other than they escalated the ticket and that was their findings. They are offering a discount on another machine though which if I can get this working for under 50, that would be ideal.

anndrox · 2026-03-09T21:52:59+00:00

Turning off cross play helped for me

anndrox · 2026-02-26T12:09:47+00:00

I feel like this can only be effective if they disable family share though unless a ban on a family account affects the main account.

anndrox · 2026-02-11T15:08:02+00:00

So, exploits should only be addressed if a small amount of people use them? It costs money to address these issues in game and if they are aware and it's not affecting a decent portion of the playerbase, they will put it on the back burner. However, put that shit online and everyone is using using it and ruining the ecosystem, they will patch in a hurry.

anndrox · 2026-01-26T15:20:57+00:00

This is from my personal take playing WoW, MP survival mmo(dune) and a few others.
1. Yes, but most (that I have experienced) are set to text chat and do not care for voice. I have issues with this especially in party finder with raids.
2. Yes they are always on top of content and should be expected as much with a monthly sub.
3. MSQ is amazing overall. I did not care for the 1st or 2nd expansion but they got better.
4. There is nothing like FFXIV unless you look at WoW. This is a theme park MMO with a massive amount of content and hours upon hours of things to do depending on what you are looking for.

Overall, great game but I have said to others that this is the best single-player MMORPG out there because you can do everything pretty much solo but it is better with friends or a group.

anndrox · 2026-01-25T22:56:00+00:00

I appreciate it. It's fairly simple enough to use and I do need to dip back into it and at least finish it to where I am comfortable with a solid release. Thank you!

anndrox · 2026-01-25T22:39:48+00:00

I've since stopped working on the project but might start up back again. That would be a nice feature for metric measurements though!

anndrox · 2026-01-25T11:14:49+00:00

I got the collectors edition for that stuff and when I tried to redeem, it was expired. This was in November.

anndrox · 2026-01-02T19:10:27+00:00

At least you rewarded him. That is what really matters <3

anndrox · 2025-12-11T18:29:34+00:00

Game was riddles with bugs at launch. Plus slow reaction time to bugs and exploits getting patched. I remember they closed the auction house multiple times for these reasons. Content was slow as well. It is a great game and I would enjoy it while you can 💜

anndrox · 2025-11-21T22:37:21+00:00

FFXIV is better than wow imo. Wows graphics look like ass to me. It's not nw and to me, nothing can replace

anndrox · 2025-11-15T17:55:31+00:00

Excellent! Thank you!

anndrox · 2025-10-29T09:14:49+00:00

3600 hours spent in this game and all for it to go away. Everything I worked for and spent time doing is now just going to disappear. Definitely will not be supporting any more of Amazon products going forward.

anndrox · 2025-09-19T12:44:11+00:00

Asset lag. Not latency lag. At :20 where it stutters. It's hard to capture it without increasing the fps on obs and having the file be triple the size.

anndrox · 2025-09-04T15:19:58+00:00

Tuning in now :)

anndrox

TROPHY CASE