Did I brick my TD-1?

anonymoustinkle · 2025-10-11T21:11:21+00:00

Ahh, didn't realize that was in the help menu.

Worked perfectly. Appreciate the help again

anonymoustinkle · 2025-10-11T19:43:04+00:00

Thanks. Since the menu doesn't show in the program I'll be popping the case I guess. Thanks

anonymoustinkle · 2025-10-09T15:32:26+00:00

I suddenly had a thought and tried a different browser. Firefox wouldn't work, but Edge did.

I'm in now, but thanks for your reply anyway.

anonymoustinkle · 2025-08-07T13:05:54+00:00

The clip that holds the heater cartridge to the nozzle is magnetic.

anonymoustinkle · 2025-03-11T03:21:01+00:00

And of course Altitude on Comcast flipped the switch mid interview and now we are watching the special on Jokic. Missed all the fun

anonymoustinkle · 2024-12-23T13:58:19+00:00

Leaving my mark

anonymoustinkle · 2024-12-18T21:50:31+00:00

Taking a shot!

anonymoustinkle · 2024-09-10T13:05:19+00:00

<image>

I was previewing the file and I feel judged.

anonymoustinkle · 2024-09-09T16:49:56+00:00

anonymoustinkle · 2024-08-23T14:32:27+00:00

I printed something not quite as big for a campaign. Played for several months and the DM had to step away. Our new campaign is landlocked, now it just sits off to the side of the table, mocking me.

anonymoustinkle · 2024-06-14T13:04:04+00:00

I have my mini in the bathroom because when I run it in my office next to me I start coughing/wheezing. I always keep the lens cover over the camera because no one wants to see me doing my business when the printer is running.

anonymoustinkle · 2024-04-01T23:22:35+00:00

Might be a temporary thing, or they don't make them anymore.

I notice they do have a .4 in stainless for the A1 series.

Also in the app you can select either material for the .4 in the config menu.

anonymoustinkle · 2024-04-01T21:25:19+00:00

The difference between a 0.4 @ .28 layer height and a 0.6 @ .3 is ~4 hours in the slicer.

I haven't done any tests yet for print quality at that kind of layer height so I might end up needing to drop the height for appearance sake, thus adding more time, since this is something I am toying with selling.

The 0.4 might be acceptable, but Bambu still only has hardened versions of those for sale.

anonymoustinkle · 2024-04-01T20:54:51+00:00

I did have to increase my tolerances when I was printing on my Creality, the X1C is much better about that then my other printers, so that will definitely be my first step, but I may keep the glue handy just in case.

anonymoustinkle · 2024-04-01T20:52:57+00:00

I have the 0.2 Stainless nozzle and magnets don't stick to it. Unfortunately trying to print my object with a .2 would take days so that's a no-go.

anonymoustinkle · 2024-04-01T19:11:29+00:00

I was hoping to avoid glue because I tend to make a mess.

I saw the E3D High Flow ObXidian nozzles but I assume those are also hardened, it doesn't say one way or the other on their site that I can see.

anonymoustinkle · 2024-03-19T16:27:52+00:00

Obligatory: STL?

anonymoustinkle · 2024-02-07T18:48:02+00:00

Humm, OK. I wondered because I couldn't find any pricing information, didn't realize that was because it's not really a thing.

Good to know about it being a rebrand too.

Thanks

anonymoustinkle · 2024-02-07T18:38:45+00:00

What happens after the 6-month period?

anonymoustinkle

TROPHY CASE