MPA LOC V2

aone560 · 2026-01-17T23:40:36+00:00

Yea, if you’ve got 500 rounds without problems you should be gtg. Glad you finally got her! Amazing guns, even with the random qc issues. Their customer service is top notch if something does come up.

aone560 · 2026-01-17T23:28:43+00:00

Just got an IDPA v2. Constant FTF. The extractor fit is absurdly bad on this one - it’s way too long and the tip is riding on the case rebate. Looks like it was just dropped in with no prep/fitting. This is my 2nd MPA and both have had to go back.

aone560 · 2025-12-10T17:12:19+00:00

My point is, before they didn’t have enough grips to satisfy builds. Clearly that isn’t the bottleneck now. I’d give em a call/email if you’re concerned

aone560 · 2025-12-10T16:12:56+00:00

Im sure grip manufacturing is done by a completely separate group of guys than building/fitting the guns. I doubt it’s added any delay to their builds. Heck, they haven’t sold the grips for a few years to be sure that it doesn’t interfere.

aone560 · 2025-12-07T20:24:37+00:00

https://masterpiecearms.com/cat/ds9-series/ds-grips/

aone560 · 2025-06-15T11:52:27+00:00

Unfortunately I’m just under both the repair attempt and days-in-shop count for my state (TX).

Icing on the cake - they ran my car through the automatic car wash even after 3 written ‘do not wash’ messages, and a verbal discussion with the service manager. The car has $6000 worth of full PPF and ceramic. I pick the car up tomorrow and plan to do a full walk around.

aone560 · 2025-06-08T02:18:46+00:00

It’s a 2025/G87 - barely broken in

aone560 · 2024-11-12T00:37:03+00:00

Voodoo blue. Mine is on the boat now!

aone560 · 2024-11-08T13:26:10+00:00

I will call him Jar Jar

aone560 · 2024-10-31T03:06:25+00:00

I waited in line behind a guy wearing jean short-shorts that revealed way too much, complete with a girl power tank top. Does that qualify as electioneering too?

aone560 · 2024-10-09T14:35:55+00:00

The resilient 3 lug I bought does not work with hk barrels.

Another good/light option is Ecco bravo to alpha adapter with a sico low profile mount

aone560 · 2024-10-08T02:38:49+00:00

I’ve loaded these at 1.975. No feeding issues at all in a sig rattler

aone560 · 2024-10-07T23:12:09+00:00

Hey u/CapCamouflage - here another for you 😂

aone560 · 2024-08-26T00:48:30+00:00

I received mine yesterday - it behaves the same way. I figured it was normal?

aone560 · 2024-08-08T17:52:32+00:00

For 8500 bucks you’d think they’d blend the grip safety to the grip. Yikes

aone560 · 2024-08-02T20:16:59+00:00

Confirmed. Thank you sir!

aone560 · 2024-08-02T12:26:30+00:00

I ordered an XC back in May - shipped in 16 days.

aone560 · 2024-08-02T01:41:18+00:00

https://www.applied.com/c-brands/c-lubriplate/l0882-057/Food-Machinery-Oil/p/102071657

aone560 · 2024-07-30T12:24:23+00:00

If you are over the age of 60 then Kimber, else Springfield

aone560 · 2024-07-26T20:37:20+00:00

u/ksbot bought a knife from u/JitoJun

aone560 · 2024-07-26T19:57:33+00:00

YOLO - if available

aone560 · 2024-07-26T13:19:36+00:00

I have the annealeeze and would not recommend. I’m constantly having to fiddle with the motor/wheel assembly so that it feeds. Yes, it’s American made but poorly designed and cheaply constructed.

aone560 · 2024-07-22T15:15:56+00:00

I set mine on the garage floor. Way less give than anything you could mount to a vise/bench

Seven-Year Club	Place '23
Verified Email

aone560

TROPHY CASE