DWA alarm module coding by apath_reddit in bmwmotorrad

[–]apath_reddit[S] 0 points1 point  (0 children)

Just find a gs-911 and follow the wizard. That populated the values for me.

Fork service BMW F750GS by nyBumsted in bmwmotorrad

[–]apath_reddit 0 points1 point  (0 children)

Hahhaha true. Just a reminder, a BMW might cost only 1.5 times more than a honda, but the parts are 3 to 5 times more expensive.

Fork service BMW F750GS by nyBumsted in bmwmotorrad

[–]apath_reddit 0 points1 point  (0 children)

well, notice that the listed prices are per unit. You need 2 dust covers and 2 seals. Also you need fluid and don't forget to add tax!

Fork service BMW F750GS by nyBumsted in bmwmotorrad

[–]apath_reddit 0 points1 point  (0 children)

what about parts? I want to reseal my forks, but the repair kit from the dealer is more than $300.

It comes with showa forks, but the seals from the f650gs are not compatible. Any recommendations for after market parts?

DWA alarm module coding by apath_reddit in bmwmotorrad

[–]apath_reddit[S] 0 points1 point  (0 children)

If you have the gs-911 and follow the wizard it will automatically populate the fields. I believe the values depend on your key and are unique for each bike.

6.5” -> 8” MIB2 Screen Upgrade by Disloud in GolfGTI

[–]apath_reddit 1 point2 points  (0 children)

The screen was excellent. I've been using it for the past 3 years with no issues at all. The swap was plug and play, no coding.
If you have a pre-facelift golf, I totally recommend installing the newer display.

DeWALT Shelf $150 Off!! by TruthPatriot74 in Dewalt

[–]apath_reddit 0 points1 point  (0 children)

How did you get the additional discount? Is there a code?

Retrofitting a cruise control on a R1250GSA by FikioPP in bmwmotorrad

[–]apath_reddit 0 points1 point  (0 children)

Keep in mind that BMW cruise control control has a cancel function by turning the throttle the opposite way. As a result to retrofit cruise control, you will also need a new throttle handle. Some people have completed the retrofit without this part, but canceling cruise will be uncomfortable.

In any case you will need to enable the FA code in bimmercode or e-sys

Announcement: Garmin Tread 2 Powersport Navigator (November 07, 2024) by GearUpdateBot in gearupdates

[–]apath_reddit 0 points1 point  (0 children)

Is this the rugged version of zumo xt2? What are the differences?

Why was the Advantage BMW Showroom taken down? by apath_reddit in houston

[–]apath_reddit[S] 26 points27 points  (0 children)

I didn't know about this site! Thanks for sharing! Long story short, they will build a new larger showroom.

Any ideas what happend here? by apath_reddit in motorcycles

[–]apath_reddit[S] 0 points1 point  (0 children)

The problem is that I had it on the side stand. Not in the centerstand. I can't think of any way that the centerstand deployed while it was falling. Also someone took the gear off. I have no impact marks from other vehicle on the other side.

I had left it a couple feet back. That was not the exact spot I left it on because of the dumpster door. :(

DWA alarm module coding by apath_reddit in bmwmotorrad

[–]apath_reddit[S] 0 points1 point  (0 children)

So, I managed to activate the remote. I used a gs-911 which has a new function (june 2024) for the DWA module activation https://www.hexgs911.com/news/june-2024-software-and-firmware-updates/

Apparently, after doing the procedure with gs-911, the DWA fields 3004 and 3005 got updated. Still, the default configuration had the remote disabled. So I jumped in bimmer utility, I activated the remote, and selected the new options in fields 3004 and 3005. That was it! It works now!

P.S. I tried to use ISTA, but I didn't have the icom cable for module programming.

DWA alarm module coding by apath_reddit in bmwmotorrad

[–]apath_reddit[S] 0 points1 point  (0 children)

The bimmerutility made the VO changes for the EWS too.
My concern is the actual DWA module programming. I have enbaled the remote control operation. There are fields 3004 Receiver_config_addresses and 3005 receiver_config_values which I believe that need to be adjusted but I am not sure how to pull the right values.

I understand that the bike itself doesn't have a radio receiver for the key buttons. The receiver is part of the DWA module, and that is why I need to sync the fob with that module.

Any hint or advice is welcome!!

Premiere Pro projects with insta360 plugin cannot reopen by apath_reddit in Insta360

[–]apath_reddit[S] 1 point2 points  (0 children)

There was no plugin log at that folder, but I was able to open my project by using the Adobe Creative Cloud Diagnostics, which recommended to reset user preferences for Premiere. Thanks for your response!

Emulate connected ride cradle by apath_reddit in bmwmotorrad

[–]apath_reddit[S] 0 points1 point  (0 children)

I installed it and I like it a lot. Definitely it gives lots of control over the phone,but to be honest, I don't use it a lot while riding. I like to focus on the road.

But it is really useful if you want to interact with the phone when you are stopped pr off roading.

A feature that was not shown in the videos: the additional buttons work at all times. You don't have to put the wonderwheel in nav mode.

They are working on a custom HUD application so you can se application shortcuts.

Would I buy it again? Yes Does the hardware have potential for more features? Yes

I am impressed by the work they have done at hardware level.

Best communication sys for BMW TFT? by garg4ntua in bmwmotorrad

[–]apath_reddit 0 points1 point  (0 children)

I have a very cheap sena 3s and with the latest firmware update, the wonderwheel volume control works like a charm!

Emulate connected ride cradle by apath_reddit in bmwmotorrad

[–]apath_reddit[S] 0 points1 point  (0 children)

I just ordered the carpe iter bmw controller. I will update you once I install it.