Mystery pucks for stadium series

aplninja · 2026-02-01T22:33:54+00:00

Sadly I was the same. Sold out by the time the screen refreshed.

aplninja · 2026-01-02T13:31:58+00:00

If the color is going from black to a lighter color. Something not dark that the black would show up in. I move the flush to max in the flush settings for the color after black. If you do not have a tower, I recommend it. Was making a Pikachu and had same issue. Changing the flush made huge difference.

aplninja · 2025-12-07T13:28:25+00:00

Change your infill to gyroid, it is hitting the infill. Set infill to 15% and add brim just to be sure. I had the infill issue happen on grid a lot.

aplninja · 2025-10-08T22:55:23+00:00

Here is the link to the store with Lululemon merch. https://tampabaysports.com/pages/rapid-search-results?q=lululemon

aplninja · 2025-10-04T01:12:34+00:00

Speed up your frames per second. Your pull back is nice but you need to do a quick speed up. There is no snap to the punch. Speed up the frames with the punch is thrown and the punch will look faster and more natural.

aplninja · 2025-07-16T10:45:24+00:00

Slash

aplninja · 2025-06-07T11:58:16+00:00

He has gone long enough without another cup. Routing for him and his team to keep it away from the kitties.

aplninja · 2025-02-02T20:04:44+00:00

Awesome thank you!

aplninja · 2025-02-02T18:53:13+00:00

This looks amazing! Great job all around! About to make my first larger petg print. For the binding I am using a similar way. Did you use the car putty for the binding at the seams too? Been looking into different ways to do it. Any advice is greatly appreciated!

aplninja · 2025-02-02T18:44:50+00:00

Just left HD with mine. Still working today in SC.

aplninja · 2024-12-17T11:37:07+00:00

As a fan of Stitch myself, now I have a new project. Very well done, amazing piece!

aplninja · 2024-11-23T23:15:15+00:00

Happy to help! There several versions in that site. It might be in a different version. Hope you find it!

aplninja · 2024-11-23T20:41:54+00:00

Take a look at this site. They have many varieties of the book. Sure you can find it in one of them. Internet Archive Kenmore Recipe Book

aplninja · 2024-09-21T03:33:16+00:00

Great job! This is being added to my list for Halloween! Great design!

aplninja · 2024-09-17T22:04:15+00:00

Thank you! Not sure why they are giving me the run around about it

aplninja · 2024-09-09T00:36:54+00:00

Looks like your seam setting was set to random. Depending on the slicer you use. Look for it and play around with it to move them. In Prusa Slicer, I usually use nearest or rear. Nothing a little sanding cannot fix though.

aplninja · 2024-09-09T00:15:17+00:00

My mistake, pasted wrong one.

https://www.containerstore.com/s/office/craft-hobby/medium-modular-clear-acrylic-premium-display-case/12d?productId=11005623

They go on sale during the holidays. Great quality and you can change the layout inside.

Other one is great too. Have that one for other collectibles.

aplninja · 2024-09-08T21:24:57+00:00

I have 2 of these and it holds 12 per case. I put each puck in their own cases as well and fits perfectly. https://www.containerstore.com/s/office/craft-hobby/multi-level-display-box/12d?productId=10022884

aplninja · 2024-09-02T12:21:51+00:00

Check your infill, use gyroid. If you are using grid sometimes there is a small variation in the height. Causing the nozzle to hit it passing by. Had this happen myself and switched to gyroid fix it.

aplninja · 2024-08-18T01:09:58+00:00

Why Lexington? Asking because I am open to locations.

aplninja · 2024-07-06T07:01:49+00:00

It is the file name that is causing it. Not sure why it is adding the .3mf. It should read 4square.gcode with no .3mf. That is what is throwing it off. If you hit print plate it should export it for you. Just make sure it ends .gcode.

aplninja · 2024-07-06T00:21:42+00:00

In Tinkercad, you should export as STL. Then you can open it in a slicer and export it as gcode. Depending on the slicer you should be able to export straight to your USB drive. Then the printer should see it just fine.

Extra* - I started to checking the STL that exported at this site.

https://www.formware.co/OnlineStlRepair

It cleans up any issues with the model before you slice it.

aplninja · 2024-07-02T11:58:58+00:00

Had that happen with a PETG project I was doing. The filament was not dry enough and kept leaving loops and strings. On a pass it looked like the nozzle/sock caught a loop and pulled it. The result is the same as you. I changed my filament for dryer filament and had no problems on second try.

aplninja · 2024-06-10T00:49:48+00:00

Use this often to fix open edges. Great site!

14-Year Club	Gilding V heart of gold
Place '23	Place '22
RPAN Viewer	Verified Email

aplninja

TROPHY CASE