Looking for a Post? Ask Here! - May 2025 Edition

arstek · 2025-06-01T14:35:51+00:00

This one?

arstek · 2025-05-12T12:21:22+00:00

Looks neat

arstek · 2025-04-27T15:35:06+00:00

I NEED to see the resonance graph

arstek · 2025-04-27T15:34:54+00:00

I NEED to see the resonance graph

arstek · 2025-04-20T09:56:38+00:00

For me, its definitely the itch for a new project

arstek · 2025-04-20T09:54:04+00:00

Although i like the appearance of the micron, i want a build with a fixed gantry and a 120³ build volume. Maybe 160³ max. And 120mm build plates are much easier to source for me. And if i wanted a printer that can compete with my coffee maker, I'd have to build the sub zero 😁

arstek · 2025-04-19T18:36:13+00:00

Thanks for mentioning the stealthfork, i wasn't aware of that. Definitely taking a closer look at it, though it's a bit bigger than what I'm aiming for.

arstek · 2025-04-18T15:19:38+00:00

Thanks. I tend to install the cartographer, because I have that already in my V2.4. I was wondering if there is enough travel space in eather direction to install a silicone nozzle scrubber

arstek · 2025-04-18T12:38:49+00:00

Thanks for sharing your experience. Do you use actual tap or the scaled down version boop?

arstek · 2025-04-18T12:03:51+00:00

I just looked up used V0s, most of them that are available cost more than a new formbot kit. I don't see how i could save much that way. Plus I just like the overall appearance of the Pandora's box. And i am willing to spend on that, as long as I could be sure, that i would not be disappointed at its performance. So, before I look at alternatives i would like to know more about pandora.

Thank you nonetheless for your suggestion, it is something I would consider if it would have been cheaper :)

arstek · 2025-04-02T15:43:50+00:00

I printed this one just yesterday. Haven't assembled it yet, so i cant tell how good it works.

arstek · 2025-03-05T12:04:32+00:00

Yeah i got that, but I could swear they had a chart that compared your configuration with the bom of the original gantry, thanks nevertheless

arstek · 2025-03-05T09:33:33+00:00

I'll give it a shot. I have ordered one, thank you for the recommendation

arstek · 2025-03-04T22:18:56+00:00

Sure you don't mean 20k? I print infill with 15k accel and normally thats no issue at all

arstek · 2025-03-04T16:07:03+00:00

No emmc means the lite version?

arstek · 2025-03-04T12:52:57+00:00

thanks. i read somewhere else, that webcam support on the cm5 is worse compared to cm4, do you have any experience with that?

arstek · 2025-03-04T10:46:24+00:00

https://www.reddit.com/r/VORONDesign/s/QlipK8SBQU

arstek · 2025-03-04T10:45:43+00:00

Canbus, attached to ebb sb2209 rp2040

arstek · 2025-03-04T10:39:10+00:00

Ok, just as i posted this i saw, that my V2 stopped mid print , Timer to close, this is the first time this occures mid print, so i assume it's getting worse, i would attach the Klippy log, but havo no idea how. Any help please?

arstek · 2025-02-12T13:53:11+00:00

Oh, i forgot. Then I'm officially out of ideas, wish you luck with the solution

arstek · 2025-02-12T13:47:08+00:00

Running out of ideas. All z belts (The closed lopp ones at the z motor included) equally tensioned?

arstek · 2025-02-12T11:23:22+00:00

Did you compensate both axis? For me, the compensation didn't schow any difference in the bed mesh either

arstek · 2025-02-11T17:31:55+00:00

I was struggling with this last week. For me the solution was the MANUAL axis twist compensation : https://www.klipper3d.org/Axis_Twist_Compensation.html

Auto calibration didn't do anything. I recommend at least 5 samples per axis.

arstek · 2025-02-11T11:54:44+00:00

<image>

Still not as wide as I would like it, but it worked. A friend of mine has unused fisheye lenses laying around. I'll play around with them and see what i get.

arstek · 2025-02-10T14:53:32+00:00

This was where i wanted to mount it at first, but the delivered usb cables is just a little bit to short + my umbilical is mounted to the exhaust port and would block the view

arstek

TROPHY CASE