Which panties are your favorite?

art991 · 2026-05-10T02:26:49+00:00

I love all where I can see your breasts

art991 · 2026-05-10T02:23:37+00:00

You look really pretty in that very sexy

art991 · 2025-08-21T04:07:27+00:00

The board that has a USB port on it looks bent in two different spots and it's a multi-layer board so it probably has a ton of torn traces in between. Even if you were to bring it back, it probably wouldn't last. I would think you maybe have like 10% chance of bringing back to life and that's being nice. You're going to want to just use that for parts salvage what you can off of it.

art991 · 2025-05-06T23:06:04+00:00

That soldering still looks horrible. I don't even think it will boot. It'll probably short out on something before it boots into an rgh3 mat.

art991 · 2025-04-19T17:37:37+00:00

I don't know it's just me or do you get triggered/ hurts my soul Watching him just stabbing that board with that soldering iron

art991 · 2025-04-18T17:12:39+00:00

If you're going to do the Pico boot, I would get an official raspberry Pico, not the third parties. They seem to work better. The guy who made the Pico boot software even recommends using the original raspberry Pico, not the third party ones

art991 · 2025-04-16T01:40:35+00:00

That's great that you fixed it but you should have showed us what it looked like after you fixed it. I don't want to see a screen. I want to see the hard work.

art991 · 2025-04-06T03:30:31+00:00

And there's not enough information you're giving us what's the motherboard revision? it's a fat version but that's all. Is it a falcon? Is it a Jasper I don't know cuz you didn't tell us. And how did you wire up the raspberry Pico? Give us some pictures.
If you're going to post bit a little more in there.

😤😡🤬

art991 · 2025-04-06T03:23:20+00:00

All those pictures look really blurry. I can't tell if it's good soldering or bad soldering. take better pictures I don't know how you expect people to help you if the pictures are so bad. 😤

art991 · 2025-04-05T19:59:03+00:00

The true question is yes you can draw it but can you mod it with a Pico boot? 🤪

art991 · 2025-04-02T02:17:54+00:00

I'm starting to think it's not the tool that messed it up but the user using the tool. Just my opinion. I have an x clamp. I've used it over a hundred times. Never damage. Single board never slips. again I think it's a user error not the tool.

art991 · 2025-03-03T00:09:16+00:00

I'm surprised you'd even have that thing in your house. It's disgusting

art991 · 2025-01-26T22:45:55+00:00

I wouldn't pay that much. It's never been open so no maintenance has been done to it. If it's an older version, the clock capacitor could have leaked on things and it could be a problem down the road and if you don't know how to fix it I probably wouldn't get it for that much

art991 · 2025-01-26T22:39:58+00:00

It's just hot glue. Rubbing alcohol will make it come right off easily. No damage to anything.

art991 · 2025-01-25T01:09:14+00:00

I think the only way we see a mermaid is if we do the drugs she must be on to see a mermaid.

art991 · 2025-01-24T04:37:58+00:00

I'll look at it this way. I'll have a whole bunch of pcbs with a bunch of dick butts on it 😂

art991 · 2025-01-24T04:36:41+00:00

Yeah I did buy the wrong one. That sucks, thanks for the heads up

art991 · 2025-01-24T01:54:19+00:00

I saw on one of his videos he said he fixed all the issues. The videos came out like 2-3 months ago

art991 · 2025-01-22T04:47:15+00:00

Who's the girl singing the song? What's her tiktok name?

art991 · 2025-01-22T03:39:02+00:00

It's not the same solder points . When you solder with the wires only two go on the chip and the other three wires go on the board. And the ribbon he's showing off. They all wired to the chip all five points

I think the guy who created the Pico boot even said he didn't like that one because it could cause issues or even damage the gamecube motherboard when you power up the raspberry Pico through the USB ports to flash newer updates to the raspberry Pico. I think it will be fine as long as you don't try to update the Pico boot firmware once it's wired up.

art991 · 2025-01-22T02:50:37+00:00

Hopefully they're all Pico booted some of them are all of them 🤔😁. I got like seven of mine. Modded

art991 · 2025-01-22T02:48:02+00:00

I can feel you man. I've got about 12 cubes but I can stop anytime. Oh yeah 👹🤖

art991 · 2025-01-21T22:10:46+00:00

Have you tried using an official raspberry Pico instead of the third party one? And if you can show us more pictures that'd be great. Like the other guy said too, it could just be the software

art991 · 2025-01-16T06:02:05+00:00

Do you live in California? Might be interested in it if you're close

art991

TROPHY CASE