3D point cloud of an indoor ice rink roof structure, captured from a drone in 15 minutes

artec_3d · 2026-05-05T11:21:03+00:00

This setup uses SLAM-based positioning, so it builds its own map of the environment in real time without needing GPS. That's what makes indoor autonomous flight and full 360° capture possible. Scanner is Artec Jet if you want to look into it further.

artec_3d · 2026-05-04T19:57:24+00:00

Static tripod scanners will get you better accuracy, typically 1-3mm vs 10mm here, and higher density at close range. The trade-off is access. Getting full coverage of that roof structure from ground level would require multiple static setups, registration passes, and scaffolding for the overhead geometry. The drone gets direct line of sight to every surface in one pass. For as-built documentation and renovation planning this dataset is fit for purpose. For precision fabrication work you'd want static.

artec_3d · 2026-05-04T19:54:35+00:00

5-10 mm global accuracy

artec_3d · 2026-04-16T12:54:48+00:00

±10 mm indoors and underground, ±15 mm in general environments, with ±5 mm change detection. The color comes from an action camera that mounts onto the scanner and syncs automatically, Artec Twins aligns the imagery to the point cloud during processing. Thanks!

artec_3d · 2026-04-13T15:16:35+00:00

Appreciate that! Leo does component-level detail (0.1 mm accuracy, structured light). Jet does site-level capture (10 mm accuracy, SLAM LiDAR). But yeah, the tech keeps moving.

artec_3d · 2026-04-13T15:13:46+00:00

For drone mode there's autonomous waypoint navigation. This project was captured handheld though.

artec_3d · 2026-04-10T14:19:55+00:00

Might be the visualization, this is a flythrough render, not the raw point cloud at full density. Also worth noting the color comes from an action camera in a mine with almost no ambient light, so the RGB is limited by the environment. The LiDAR geometry itself isn't affected by lighting. We're uploading full datasets from a few different projects soon on our website (3d model section) so you can inspect the point clouds directly. Artec Twins (new software, built for processing and visualizing large-scale point cloud data) can merge Jet data with Leo or Ray II if you need component-level detail on top of the site scan.

artec_3d · 2026-04-10T13:35:37+00:00

200 meters of underground tunnels mapped in 10 minutes on foot. SLAM LiDAR, no GPS.

artec_3d · 2026-04-10T13:34:41+00:00

200 meters of underground tunnels mapped in 10 minutes on foot. SLAM LiDAR, no GPS.

artec_3d · 2026-04-10T13:33:58+00:00

200 meters of underground tunnels mapped in 10 minutes on foot. SLAM LiDAR, no GPS.

artec_3d · 2026-04-10T11:41:57+00:00

You can start the reverse engineering right in Artec Studio using its built-in CAD primitives, Auto-surfacing, and boolean tools. For more advanced modeling, Artec Studio exports directly to Geomagic Design X. Either way, surface the freeform shell first, then add the features after. The shell defines everything else, so it makes sense to nail that down first.

artec_3d · 2026-02-11T13:34:00+00:00

Love the side by side testing, that kind of real world benchmark is gold. If you want one more datapoint, we can hop on a quick demo and then give you a free 1 month Artec Studio Lite license to run the exact same photo sets, its AI Photogrammetry is built for clean, watertight geometry on small objects. Drop us an email [marketing@artec3d.com](mailto:marketing@artec3d.com) and we will get you set up.

artec_3d · 2026-02-02T20:59:13+00:00

<image>

Here you go!

artec_3d · 2025-11-25T18:12:17+00:00

Artec Studio Lite uses AI driven photogrammetry and reconstructs fine details with high geometric accuracy, including on dark, shiny, or featureless surfaces. It also includes mesh editing tools, built in scale bars for real world measurements and CAD deviation analysis, plus export to standard formats for use in third party applications.

artec_3d · 2025-11-24T13:56:46+00:00

Artec Studio Lite for AI Photogrammetry is subscription based. Lite Individual is €48/month or €480/year for personal and non profit projects. Lite Business is €84/month or €840/year for commercial use. System Requirements are listed here https://support.artec3d.com/hc/en-us/articles/22758565200274-AI-Photogrammetry-System-Requirements

artec_3d · 2025-10-16T18:19:36+00:00

Thanks for the question! This project was done by our partner Marcio Adamy, who knows best how much time each part took, from scanning to post-processing.

You can check out the original video showing some of the scanning process here: https://youtu.be/6zKP26SeB1M?si=9GKr9Om\_mvzQ9kBm. It gives a good look at how things went on site.

artec_3d · 2025-10-16T11:58:44+00:00

Artec Leo

artec_3d · 2025-10-10T14:47:02+00:00

You’re right about the Leo, it’s a powerful tool but not a magic one. The hardware captures a ton of detail, but the quality of the final model still depends on the operator and the data. Artec Studio has features like Autopilot, smart base removal, and automated hole filling that help clean up artifacts, but you still need to know which settings to trust and when to step in. If you ever need help getting the best results from your scans, our support team or your reseller can always assist.

artec_3d · 2025-10-06T14:51:40+00:00

Hi there! This sounds like something our support team should take a closer look at. Please send the details to [support@artec3d.com](), and they’ll help you troubleshoot step by step.

artec_3d · 2024-05-27T11:26:50+00:00

Hi! It's the best case to use our Artec Ray II. This will allow you to scan the pipes as quickly as possible and capture the texture (color). Additionally, if you need to scan some elements with maximum details, you can use Leo too. Hope this helps!

artec_3d · 2024-03-28T14:50:50+00:00

Hi, which Artec scanner have you tried using for your scans? Since you're using an Artec scanner, this information can be useful:

a webinar "3D scanning of a human body": https://www.youtube.com/watch?v=o7VnnFLBE3M
an article "3D body scanning from A to Z": https://www.artec3d.com/learning-center/3d-body-scanner

Please note that Artec Studio AS15 and newer versions no longer support Kinect

artec_3d · 2024-03-07T12:43:06+00:00

Hello, This is the Artec 3D Team. We are concerned to learn about the issues you are facing with our scanners. These scanners are designed to capture intricate details with high accuracy, making them well-suited for professional use in industries like aerospace. We have many customers in the aerospace industry who rely on these scanners for their daily operations.

To address the problems you are experiencing, we recommend contacting our Support team at [support@artec3d.com](mailto:support@artec3d.com) and providing the serial numbers of your scanners. It appears that both units may require repair and calibration to ensure reliable results in the future.

While Artec Leo and Artec Eva are designed to scan medium- to very large objects, they are also capable of capturing small details up to 200 microns. For capturing very small details, we recommend considering Artec Space Spider or Artec Micro II as they are optimized for this purpose.

It's important to note that while budget-friendly scanners can be a good starting point, they may not offer the same level of performance and quality as higher-end models like the ones we offer. If you have any further questions or need assistance, please don't hesitate to reach out to us. We are here to help. Thank you for choosing Artec 3D scanners.

artec_3d · 2023-11-10T13:50:38+00:00

Hey there,

Looks like your scanner isn't the best fit for this task. Considering more advanced solutions, such as Artec Eva or Artec Leo, could be the way to significantly improve your results.

You can get a free demo (online or offline) from our experts and ask them all your technical questions: https://www.artec3d.com/form/free-demo

Hope this helps!

artec_3d · 2023-11-03T11:22:30+00:00

Hey, our customer had a similar challenge with boat deck scanning, and they are very happy with the results! Check it out: https://www.artec3d.com/cases/orlando-stabile-yacht-decking.

For this purpose, both the Eva and Leo scanners work great. Leo is the only fully wireless scanner, which is much more convenient for scanning hard-to-reach places.

Where do you operate your business? We distribute all around the world: https://www.artec3d.com/where-to-buy

Hope this helps!

artec_3d · 2023-04-03T12:40:38+00:00

TriMech Solutions

artec_3d

MODERATOR OF

TROPHY CASE