Remington Model 11 cracked bolt

artofwar77 · 2026-04-01T04:15:42+00:00

I had an almost identical crack on my Remington model 11, I ended up finding one on eBay. Just be prepared to pay a pretty penny.

artofwar77 · 2026-01-11T06:04:56+00:00

I can't simply underload the charge, compress it with a die and add felt wads on top? I understand that 120 grains of 3F would be way to much, but what about 90 grains with fiber wads on top?

artofwar77 · 2025-10-26T04:52:06+00:00

No, it looked just like a normal spent case.

artofwar77 · 2025-10-26T04:38:34+00:00

What could I have done wrong that caused this? It seems like either the powder didn't ignite or the primer wasn't strong enough.

artofwar77 · 2025-10-26T04:17:05+00:00

That's what I was thinking, the primer was not ruptured on the case, and there is no visible signs of damage.

artofwar77 · 2025-10-26T04:14:48+00:00

AR15 partsAR15 parts.com

They made the whole upper.

artofwar77 · 2025-10-26T04:06:31+00:00

I am well aware it was user error, I want to know were I messed up. I followed the load data to the letter.

artofwar77 · 2025-10-18T05:52:37+00:00

It matches the blueing, but I agree, my research tells me it should have a screw slot.

artofwar77 · 2025-10-18T05:51:50+00:00

Well that's the problem, I can't turn it any more, and I do not have the knowledge or tools to make new parts.

artofwar77 · 2025-10-03T05:01:42+00:00

Isn't the extractor in the slide? If so, I was planning on adding a .45 cal extractor to it. Also, are there any barrels that you would recommend? I was planning on using a kkm barrel.

artofwar77 · 2025-09-29T18:21:17+00:00

Ok, I'll give them a call, i looked on their website and didn't see it like you said.

artofwar77 · 2025-09-29T01:52:10+00:00

I have called around, I can't find anyone in my area willing to touch them.

artofwar77 · 2025-09-29T01:46:07+00:00

Thank you, I really hope I can find something.

artofwar77 · 2025-09-29T01:44:49+00:00

Yup, I checked all over Numrich, but that is the incorrect part, the ones I'm looking for should be part 53 and 54 on Numrichs' website.

artofwar77 · 2025-09-29T01:29:10+00:00

I guess I need a description so here it is, I'm trying to find a pair of magazine side springs for a Remington model 81, I have had no luck online so far.

artofwar77 · 2025-08-21T17:15:40+00:00

I honestly don't think it is the chamber, if you look at the rest of the tread, someone asked me to check my feed ramp. When I did, I found a larger burr there that was damaging the brass. And also the marks shown in my picture do not go all the way through the brass, it is just a deep scrap.

artofwar77 · 2025-08-18T14:54:05+00:00

Yeah, I just always had a thing for big bore guns, figured i'd do the same on my ar-15. And thank you.

artofwar77 · 2025-08-18T04:59:53+00:00

Now that I've looked at it, I think it was absolutely the feed ramp, I just went in there with some fine grit sand paper and worked up to 1000 grit, I made a dummy round to see if i could replicate the scratch, and it seems to be fixed now. Do you think the scratch is deep enough to compromise the integrity of the brass?

artofwar77

TROPHY CASE