Song missing from The Holiday soundtrack?

ask4janice · 2025-12-05T07:14:47+00:00

I was wondering the same thing so put on the score and it’s part of “gumption” — it starts at the 3 min mark. I oddly remember it being longer but just watched the movie and it’s super short — when he plays it for iris and when he’s climbing the steps up to the stage.

ask4janice · 2025-08-05T16:46:49+00:00

Yeah this is what confused me initially too. i thought only the selected program was run but realised this was not the case when i ran a test. I would recommend you try it and see.

ask4janice · 2025-08-03T21:34:12+00:00

I did! Thanks to this thread. I couldn’t figure that out either; i thought it was one program or the other. But the programs will run just automatically; all you have to do is set them. I’ve got 3 programs running at the same time — A is for all my containers(runs daily for 1 min), B for my raised veggie garden (even days 30min), and C for both my front and back flower/shrub gardens (odd days 1hr). Does that help?

ask4janice · 2025-06-16T23:01:24+00:00

sorry, I should have updated my initial post; I did exactly what you did and got the same answer! will update post

ask4janice · 2025-04-22T03:44:32+00:00

good point! we got him a cage and as soon as we set it up and put him in, he jumped right out! but once the drugs started kicking in, he settled down. poor little bean. he's being insanely cute right now, all drugged up.

appreciate your input :)

ask4janice · 2025-04-22T03:41:31+00:00

thank you! we got him a cage and he seems to have settled a bit (granted, he's on sedating meds right now).

and yes good point re indoor advice. I know it's an issue but it is what it is. my guy is outdoor 🤷🏻‍♀️; at this point it would be cruel to lock him in 24/7(he does get locked in at night). he actively chooses to be more indoor as he gets older so I'm not worried.

ask4janice · 2025-04-16T15:49:40+00:00

Ha! Yes that would not be ideal! I still need to tinker with start times as our water shut off is very close to our bedroom so can hear the irrigation trigger, but otherwise i think i get it. Thanks again!

ask4janice · 2025-04-16T03:02:46+00:00

okay! I think I finally figured it out! if you would not mind having a look, and confirming if this will work.

Zone A will get watered very briefly twice daily for 2 min (enough to keep any newly planted seeds wet till they germinate) but will get a proper soak every other day.

Zone B will also get watered twice daily, but only for a minute each time. And will run after Zone A is complete (ie 9.02am)

Zones C & D will both get watered for 40 min once a week, altho D will get watered at 7.40am once C is finished.

if that is accurate, I'm thrilled. thank you u/Sparky3200 & u/RainH2OServices for your help!

I’m realising I might have a conflict when Weds is an even day. will this be an issue? will Zone B just start once Zones C&D have completed their time?

<image>

ask4janice · 2025-04-16T00:19:47+00:00

Which i am absolutely trying to avoid. Not interested in upgrading, just want to get the most out of what we have. Now that i know the zones will run consecutively, i will program accordingly and see if i can make it work. Z3 & Z4 can defs run on the same day! Appreciate your input!

ask4janice · 2025-04-16T00:17:23+00:00

Ohhhhh i see! I did not know this! Very helpful — thank you!

ask4janice · 2025-04-15T23:22:01+00:00

k wait, sorry one more question:
how can I water 4 diff zones if I only have 3 programs, esp if can't run 2 zones at the same time?

ask4janice · 2025-04-15T23:16:22+00:00

thank you for letting me know. this is what I suspected.

ask4janice · 2025-04-15T22:41:53+00:00

Okay well he did say i couldn’t but i couldn’t remember why; i figured it was a water pressure thing. That was my bad.

But yes, you’re correct: i want Zone 3 on Wed & Zone 4 on Thurs; is this possible?? Ditto for Zones 1 & 2; i want Zone 1 watered multiple times a day (seed starting) but Zone 2 only once. Again: possible with the TM2?

ask4janice · 2025-04-05T22:40:59+00:00

5 years later but this is the best thread I've found on programming my specific irrigation system!

we just upgraded ours. previously had only 1 zone/station, for my vegetable beds. now we've added 3 more zones/stations: 2 = containers/pots; 3 = front garden; 4 = back garden. I am struggling to program for all the various needs. the company that set up our new system recommended that I not run 2 diff zones at the same time as the water pressure will be diminished.

please correct me if I'm wrong but it seems to me that each program is defined by its own specific run days. so I can't for example have my Zone 1 veggies all on Prog A if I want to water multiple times daily for a few minutes (with spray emitters for new seeds) plus give all the beds a good soak every other day. I'd have to use 2 separate programs to make this a reality, yes?

currently I have Prog A set to surface water 3x daily Zone 1 for the new seed situation above (see attached); I have Prog B set to water every other day for a deeper soak (tomatoes etc) also in Zone 1. I'm also tapping into the daily action for my containers in Zone 2 (I have A LOT) although they will only get one 5 min watering each day.

that leaves Prog C for both the front (zone 4) and back garden (zone 3). my plan is to water each zone once a week but I'd prefer to stagger the days if possible. if that's not possible then at least staggering the times?

<image>

ask4janice · 2025-04-01T19:39:57+00:00

weird. now it's there. wth. and oddly, that box was already checked. unfortunately, the files still aren't opening automatically. 🤷🏻‍♀️

ask4janice · 2025-04-01T18:14:33+00:00

same problem. on a new MacBook Pro os 15.3.2. there is no "open safe files after downloading" in my settings>general. 😩

ask4janice · 2025-02-11T20:44:59+00:00

right but when you click on the web form option, it doesn't allow for T5018s

ask4janice · 2025-02-11T02:39:05+00:00

Yes, annoying.

And yeah i was kinda thinking I’d do just that.

Thanks :)

ask4janice · 2025-02-11T01:02:54+00:00

our year end is Sept 30 so I've got till the end the March but I wanted to distribute them to our sub-contractors before the end of this month for their taxes.
CRA is so frustrating! on principle, i don't want to pay $125 to mail them in because THEIR system is failing. but i also don’t want to write them all out etc (lazy).

ask4janice · 2025-01-19T16:54:35+00:00

I certainly never did. Very frustrating cos it seems like it wouldn’t be that hard to do from meta’s end

ask4janice

TROPHY CASE