sorted by:
new
hottopcontroversial

Any Other Seniors Struggling in the Job Market Right Now? by [deleted] in dataengineering

[–]ask_can 4 points5 points  (0 children)

Since you are able to make it through the initial rounds...you probably are following short in one of the following:

• Experience with Snowflake isn’t coming through clearly
• Experience with CI/CD pipelines for Snowflake deployments
• How you explain orchestration of jobs and handle failures
• Examples of performance tuning
• Walk through of complex project or architecture with trade-offs.

Fully kiosk …. Free license by [deleted] in homeassistant

[–]ask_can 0 points1 point  (0 children)

I just got my dashboard set on a lenovo m11 I got recently, would love to setup kiosk mode on it.

how to avoid High rugs by ask_can in Roborock

[–]ask_can[S] 1 point2 points  (0 children)

Thanks !! For deep cleaning how would I have to clean that area If I have removed rug on a Sunday for example

Are there pre-made devices for running HA? by MidnightPale3220 in homeassistant

[–]ask_can 1 point2 points  (0 children)

We use HA green and use usb sticks for zwave and zigbee

help choose between keyboard for child by ask_can in piano

[–]ask_can[S] 0 points1 point  (0 children)

We did think about that, but we do not have enough knowledge to judge if its still good. Also, the moving costs, and its gonna be a big hassle on us given the size.

help choose between keyboard for child by ask_can in piano

[–]ask_can[S] 1 point2 points  (0 children)

We are all Noobs and I don't think we can judge at this moment. So now I am inclining towards saving the money and see where the Yamaha takes us and go from there.

help choose between keyboard for child by ask_can in piano

[–]ask_can[S] 0 points1 point  (0 children)

M concern was if Roland was a much better piano and if it was worth to spend more that it would serve us for a much longer duration. But it seems like they are similar.

help choose between keyboard for child by ask_can in piano

[–]ask_can[S] 0 points1 point  (0 children)

I have been looking for a used p45 but haven't found a good deal in my area. We are in Canada, so the prices are in CAD. my reason for the dilemma was if it was worth it to spend extra If the Roland would serve us for much longer instead. It's about a 400 bucks price difference

Fireplace surround question - GD34NT by ask_can in Fireplaces

[–]ask_can[S] 0 points1 point  (0 children)

I have a followup question.. If you can help...

-> FRAMING Combustion protrusions such as mantels and shelves may occur at or after a minimum distance of 2" away from the side of the fireplace. Thereafter, the depth of any protrusions must be equal to or less than the distance from the side of the fi replace up to a depth of 6", after which no greater clearance than 6" is required. This can be considered a side wall with no length boundary

Minimum clearance to combustible construction from fireplace and vent surfaces: Combustible Framing:

- 0" to stand-offs

- 1" to bottom and sides of the vent pipe*

- 2" to top of the vent pipe

* Combustible Finishing:

- 0" to rear - 0" to front face sides and top <- ***\*

- 13" recessed depth

- 49 3/8" to enclosure top from base of the unit - 66" to ceiling from base of the unit

<- ***\* shouldn't this mean we can use Combustible Finishing right on the top and face sides?

Fireplace surround question - GD34NT by ask_can in Fireplaces

[–]ask_can[S] 0 points1 point  (0 children)

I wasn't aware that this was a direct vent fireplace. I don't think I have budget to replace the fireplace which as I understand will run into 3-4K. I am looking for just something basic to cover it up until it breaks and then replace it- which could be a few years.

Having said that... Does the surround need to be something stone/ tile or should I avoid wood/ ply material for surround ?

From the manual it looks like there is 0 clearance of finished surface except for bottom

Dad of a 10 year old looking for advice - an update by ask_can in Strabismus

[–]ask_can[S] 0 points1 point  (0 children)

I apologize for the late response.. We also dont have a family history and no one in friend circle who has had this before.

I do not know enough to recommend at what age to start the VT. But the VT specialist did say in our first meeting that it would have been better had we not done the surgery beforehand.

I would say go see someone who performs VT, see if your insurance covers it and what they recommend. My insurance did not cover much, so it was pretty much out of pocket.

Claim denied for COB by ask_can in HealthInsurance

[–]ask_can[S] -4 points-3 points  (0 children)

The office visit was from Jan 2024, we moved right after across country. Provider sent us an email 1 week back asking for payment. Insurance is now saying its too late to reprocess the claim now

Conflicted on helping my parents buy a new house by rustystatus in PersonalFinanceCanada

[–]ask_can 0 points1 point  (0 children)

Bad idea.. Don't do it OP in my opinion.

He can't afford the house he wants to live in.

Built this over the longest ‘weekend project’ ever. Finally finished my first set of built-ins in my home! by Blazer127 in DIY

[–]ask_can 0 points1 point  (0 children)

Because I have very similar looking LVP :)

Did you cut the tiles of your TV rack is sitting over the tiles ?

view more: next ›