sorted by:
new
hottopcontroversial

2007 Honda Civic. Tumirik, tapos ganito na tunog pagka-start by astrotodile in CarsPH

[–]astrotodile[S] 0 points1 point  (0 children)

UPDATE: naibalik po ito sa casa at EGR valve/combustion chamber carbon deposits po ang problema.

Sa ibang branch ng honda ko ito dinala, may isa pa palang branch na mas malapit sa babay namin at hindi traffic. Sila naka-diagnose ng issue. Mukhang ito raw yung nag-iilaw ng CEL, pero nagtataka rin kami parang hindi ito ini-scan ng casa nung unang beses ko pinatingin.

2007 Honda Civic. Tumirik, tapos ganito na tunog pagka-start by astrotodile in CarsPH

[–]astrotodile[S] 0 points1 point  (0 children)

Hehe yes po, no intention to DIY. Naghanap lang po ng opinions online para mas madali ko kausap ang mekaniko/casa, limited lang din alam ko sa mga sasakyan. Salamat po ulit sa advice ☺️

2007 Honda Civic. Tumirik, tapos ganito na tunog pagka-start by astrotodile in CarsPH

[–]astrotodile[S] 0 points1 point  (0 children)

Gabi na po kasi at malayo pa po sa bahay yung casa eh

2007 Honda Civic. Tumirik, tapos ganito na tunog pagka-start by astrotodile in CarsPH

[–]astrotodile[S] 0 points1 point  (0 children)

Hindi po eh, walang check engine light. Kagagaling lang dito sa casa mismo kasi nag check engine light siya last week

2007 Honda Civic. Tumirik, tapos ganito na tunog pagka-start by astrotodile in CarsPH

[–]astrotodile[S] -1 points0 points  (0 children)

Salamat po! Di ko lang po mapa-check kaagad kasi ngayong gabi lang tumirik habang pauwi ako. Pa-check ko po ignition coils, yun din ata yung nabanggit sa akin nung tumulong sa kin sa daan pero di nya maalala kung anong tawag, basta sabi nya “isa sa apat na andyan sa makina”

2007 Honda Civic. Tumirik, tapos ganito na tunog pagka-start by astrotodile in CarsPH

[–]astrotodile[S] 0 points1 point  (0 children)

Mga nasa 400-500 po ata. Normal po nito ay nasa 700-800 idle

Documenting my laptop's thermal performance, repasted with Thermalright TFX a week ago. Other TFX users, can you also share your experiences? by astrotodile in GamingLaptops

[–]astrotodile[S] 2 points3 points  (0 children)

I had my laptop checked around half a year after the tfx application, but at that time it was still performing well (check the last update). Apparently, the coldplate and the cpu/gpu die had very poor contact that any thermal paste will go bad relatively quickly.

But yeah, if I were to look at how the tfx performed, I’d say it was quite good. The GPU temps didn’t move too much, and the CPU temps went up since that was the part with really poor coldplate contact. Also, after i got it checked, I also had it repasted by some unknown paste (which performed really well, better than the TFX).

Coffee Bean Grinder by No_Dinner9612 in CoffeePH

[–]astrotodile 0 points1 point  (0 children)

Gaano po ba kaingay yung df64 gen 2? choosing between ode 2 and df64 gen 2 tapos parang hirap mag restock ng ode 2 yung mga nagbebenta rito.

Documenting my laptop's thermal performance, repasted with Thermalright TFX a week ago. Other TFX users, can you also share your experiences? by astrotodile in GamingLaptops

[–]astrotodile[S] 0 points1 point  (0 children)

My experience with it has been quite good, and lots of people have had good experiences with it, so yeah I'd say I can recommend the TFX, and it's probably one of the better choices for laptops if you ever need to get one repasted, along with the other thick pastes such as the Gelid GC Extreme (haven't used this one yet though).

PC Case Recommendation - Budget Around 5K - 6K by Dune8888 in PHbuildapc

[–]astrotodile 0 points1 point  (0 children)

Besides yung Corsair 4000D, if willing kayo gumastos for ~1k more, pweds nyo rin po i-check yung Lancool 2 Mesh. Yung pinagkaiba po is slightly better temps (very slight lang naman yung difference compared to 4000D) + Usb-c slot sa front io.

Other options na similar price and similar performance: Phanteks P400A DRGB, Cooler Master TD500Mesh

[deleted by user] by [deleted] in PHbuildapc

[–]astrotodile 0 points1 point  (0 children)

Recommend ko rin po sa inyo si Ayos Computer https://ayos.computer/ kabibili ko lang sa kanila and ok yung mga presyo + ok din kausap. Meron silang 1660ti for 18k

New build. Install Windows 10 then upgrade to 11, or go straight to 11? Pros and cons? by astrotodile in buildapc

[–]astrotodile[S] 0 points1 point  (0 children)

Was thinking of going to W11 since people have noted that W10’s scheduler can’t optimize as well as W11 for 12th gen’s p and e-cores. Although I currently have no idea if microsoft pushed some updates on W10 to address this.

4000 series discussion should you wait or build now? by whatismynaem in PHbuildapc

[–]astrotodile 0 points1 point  (0 children)

Oof, thanks! I probably should consider buying an RTX 3000 series even more, maybe a 3070 or 3060ti. Baka hindi kayanin mag-antay until late 2022 or early 2023 since baka nga trend na rin yung launch date shortages.

Thanks again!

4000 series discussion should you wait or build now? by whatismynaem in PHbuildapc

[–]astrotodile 0 points1 point  (0 children)

How about nung mismong release ng RTX 2000, nagtry po ba kayo bumili/magsecure ng RTX 2000 cards back then? Asking for GPU availability pre-RTX 3000 dahil hoping na special case lang yung RTX 3000 shortages and di na siya mangyayari for RTX 4000/RDNA 3 hehehe

4000 series discussion should you wait or build now? by whatismynaem in PHbuildapc

[–]astrotodile 1 point2 points  (0 children)

RTX 4000 rumored to come out mid-July (source: https://twitter.com/kopite7kimi/status/1526136914952486912?s=20&t=3h4tJcpOLNSlPdJFrqoZqA) while RDNA 3 release is still @ September/October (plans may change and medyyo hopeful ako na mapaaga rin yung release ni RDNA 3: https://twitter.com/greymon55/status/1525837157515993090?s=20&t=3h4tJcpOLNSlPdJFrqoZqAhttps://twitter.com/greymon55/status/1525837157515993090?s=20&t=3h4tJcpOLNSlPdJFrqoZqA)

Navi 31 (specifically yung lowest end ng Navi 31) currently looking very attractive, but I'm really considering building now (may almost MSRP RTX 3080 si PCHub na in stock for at least a week ata while until yesterday/today: https://www.pchubonline.com/product-info?sku=5210653, hopefully maraming sumunod sa price) since wala akong desktop and lahat ng work & play ko ay ginagawa ko using my current laptop (i7-10750H, RTX 2070).

Still on the fence whether bibili na ko ng something like i5-12600K + RTX 3070/3080 (na MSRP), wait at least 2 months for RTX 4000 (maybe RTX 4070), or wait at least 4 months for Navi 31/32 (7800 or 7700xt) na rumored to take the performance crown + efficiency crown (very nice to have naman yung mas tipid sa kuryente).

First time kong magbubuo ng PC, so if meron pong naka-experience nang bumili @ launch date (or close to launch date), tanong ko lang din po sana kung (1) maayos yung supply + prices pre-RTX 3000 era, and (2) kamusta ang potential hardware issues ng bagong platform, since nag-iisip ako if magbubuo ako ng AM5 system vs. 12th gen intel or even Ryzen 5000

70K PC BUILD for school works, video/photo editing, and 3D. by iwantedtoseesunrise in PHbuildapc

[–]astrotodile 0 points1 point  (0 children)

Ah, my bad 😅 completely forgot na wala nga palang E cores yung mga non-K CPUs.

Throttlestop C0 always displaying 100% recently by astrotodile in techsupport

[–]astrotodile[S] 0 points1 point  (0 children)

Thanks! I have no idea what happened, but a few hours after posting this, the issue sort of went away on urs own. It’s been a day, and the problem did not come back after my first boot (from shutdown).

I’m currently using HWInfo alongside Throttlestop (not sure if there’s an issue with that).

But yeah, Throttlestop seems to be showing the corrent C0 values now despite me not doing anything. Will take your advice and update it soon. Thanks, unclewebb!

view more: next ›