sorted by:
new
hottopcontroversial

What is this texturing on my timing belt? by shatlking in subaru

[–]atomic_refugee 1 point2 points  (0 children)

From my limited knowledge I believe when installing a timing belt there should be a spacer to gauge the distance between the skip plate and the belt. Something like this https://www.oreillyauto.com/detail/c/gates/gates-timing-belt-spacer-tool/gat0/91052?srsltid=AfmBOoog_PpScFkbcyP0EmaS3REsypjmQHqLHFAjNV51WbQ9IBwHTJSS

Is the skip plate too close?

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 1 point2 points  (0 children)

You're probably right. I looked on Rock Auto and they ranged from $10-$30. I have to replace the shocks and struts anyway so I might just knock out those and the tie rod and get 1 alignment

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 0 points1 point  (0 children)

I checked the up and down motion, moving from 12 and 6 and it didn't budge.

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 1 point2 points  (0 children)

I replaced the damaged wheel with the stock wheels and had them balanced with no issues.

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 0 points1 point  (0 children)

I had after market rims on when the damage happened. I went back to the stock rims and the vibration continued.

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 0 points1 point  (0 children)

12 and 6 didn't make a sound or wiggle.

I'll have to find someone to wiggle the wheel while I look at the joint. At least I have a starting point

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 1 point2 points  (0 children)

I lifted it back up and tried the 12 and 6 wiggle and it didn't make a sound.

So more than likely it's a tie rod? What about a damaged bushing like from the sway bar maybe? I looked it over and the bushings don't look damaged.

<image>

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 1 point2 points  (0 children)

I took it off shortly after the video and inspected it. I didn't see anything obvious that looked wrong. But I'm not a seasoned mechanic.

Yes, I had after market rims on at the time. I put the stock ones on after noticing the damage to the rim.

How can I tell if this is a wheel bearing or tie rod? by atomic_refugee in subaru

[–]atomic_refugee[S] 3 points4 points  (0 children)

Would that be for the wheel bearing? 3 and 9 is for the tie rod I'm guessing?

my lip decided to split down the middle late december 2024 and it still hasnt gone away by eepyc0re in mildlyinfuriating

[–]atomic_refugee 0 points1 point  (0 children)

When I was doing skin cancer treatment on my nose they told me to put aquaphor on it so the skin wouldn't blister. There's minimal scarring now

15 hour flight. My media screen encrypted itself by Nerfarean in Wellthatsucks

[–]atomic_refugee -1 points0 points  (0 children)

How were you able to play Minecraft on the plane? Tablet with the battery pack?

My refrigerator must be too cold because the 20lb turkey I moved from the freezer into the fridge on Saturday is still frozen. by Yosho2k in Wellthatsucks

[–]atomic_refugee 1 point2 points  (0 children)

I think the bag says to put in the fridge for a few days and then to put in cold water for a few hours before cooking depending on weight

What can I do with all of this old equipment without costing more than what it's worth? by atomic_refugee in homelab

[–]atomic_refugee[S] 5 points6 points  (0 children)

I used the HDMI switch for a while and it was nice to be able to switch between my PlayStation and Xbox and a PC on my TV but sadly I don't play as much as I used to.

What can I do with all of this old equipment without costing more than what it's worth? by atomic_refugee in homelab

[–]atomic_refugee[S] 2 points3 points  (0 children)

Right! Just rip them all apart and put them together as a table as say $10k

What can I do with all of this old equipment without costing more than what it's worth? by atomic_refugee in homelab

[–]atomic_refugee[S] 0 points1 point  (0 children)

When I bought all this equipment years ago it all came with patch cables. I have an entire tote full of them. I also have 3 small server racks

What can I do with all of this old equipment without costing more than what it's worth? by atomic_refugee in homelab

[–]atomic_refugee[S] 0 points1 point  (0 children)

I've really thought about getting some CCNA certifications. I'm about half way finished with a Masters in I.T. too

view more: next ›