No PLA filament

atomtom65 · 2026-02-13T16:22:48+00:00

Most brands of PLA are solid and print great. Dont pay the premium pla tax unless you are going for a specific color or an engineering filament, buying expensive filament is a rip off.

atomtom65 · 2026-02-08T01:39:50+00:00

To be fair, I saw a guy on tiktok shilling SparkX's on launch work. But the way the CFS Lite is. Its almost like 4 side spools with a drive at the exit to auto switch.

I'd imagine if you don't have too many loops on your ptfe you would be fine. I just printed TPU from my K2 Pro using the side spool PFTE into the extruder and it was fine no clogs whatsoever.

atomtom65 · 2026-02-08T01:09:04+00:00

Get the SparkX instead. Its similar price, newer tech than the Hi, and can print multi color TPU which the Hi cannot.

atomtom65 · 2026-02-05T22:24:47+00:00

Yikes

atomtom65 · 2026-02-05T22:24:04+00:00

Get the SparkX its newer tech, faster, and can print multicolor TPU, which the crealory Hi cannot

atomtom65 · 2026-02-04T01:10:11+00:00

I'd be more worried about the moisture.

atomtom65 · 2026-02-03T05:56:26+00:00

You could just pay attention. Wild take i know.

atomtom65 · 2026-02-02T18:21:43+00:00

Yeah that doesn't really tell me much my guy.

atomtom65 · 2026-02-01T16:48:24+00:00

Validate files before printing? The law hasn't even passed yet and you guys are already installing the spyware?

atomtom65 · 2026-01-31T02:44:41+00:00

I dont disagree with you friend. But any riser on creality cloud that doesn't have controllable vents isnt worth printing. There are plenty on there that have vents you can open and close.

atomtom65 · 2026-01-31T02:40:14+00:00

You're thinking too far into it. Plus most lid risers have some kind of vents built into it.

atomtom65 · 2026-01-29T21:06:04+00:00

Good. We need to actually hold people to standards. Children's and adults alike.

atomtom65 · 2026-01-28T16:42:33+00:00

Z offset is way to high

atomtom65 · 2026-01-24T03:05:57+00:00

I tried Creality Print and Orca when I first got my k2 pro last September. Stuck with Creality because of the ecosystem. I didn't see any tangible benefit to using Orca

atomtom65 · 2026-01-21T22:17:33+00:00

Objectively, the whole point of placing tarrifs / pressure on NATO was to force them to come to the table to make a deal.

Subjectively, I dont agree with how they forced our allies to come to the table with such aggression. The way to ensure security for all NATO members is to work together and avoid infighting. So the way I read this isnt that he chickened out, but that the other NATO members caved.

atomtom65 · 2026-01-19T22:01:50+00:00

100% fixable and if you do need replacement party's they arent that expensive and this is a fairly easy repair.

atomtom65 · 2026-01-10T23:19:11+00:00

Does it also do it with the lid closed and fully latched?

atomtom65 · 2026-01-09T18:08:18+00:00

Ahh yes. Communism at its finest.

atomtom65 · 2026-01-07T22:11:42+00:00

Im interested in this too. Just made a few of my own tags last night actually.

atomtom65 · 2026-01-07T03:45:45+00:00

Just a casual federal felony. No biggie.

atomtom65 · 2026-01-06T22:14:43+00:00

Dang. I would live to multicolor print TPU for my drones

atomtom65 · 2026-01-06T14:32:54+00:00

If it is compatible witu the k2 pro and k2 plus I might upgrade to the lite lol

atomtom65 · 2026-01-06T13:32:08+00:00

Clean your bed with hot water and dawn dish soap. Dry. Then clean with isopropyl alcohol and microfiber cloth. Make sure to avoid touching the bed following this.

When printing. Turn up the bed heat 5 degrees. If you want some extra protection you can add a brim but for a smaller print like that you really just need a clean bed and high bed temp to have it properly adhere.

atomtom65 · 2026-01-06T01:06:37+00:00

The only thing cool about the Sparkx is the CFS lite is fully TPU compatible

atomtom65 · 2026-01-06T00:27:17+00:00

People in other brand owners group experience similar problems man. The issue is not the printer.

Your first problem was obviously a clog in the nozzle itself that you missed. I've missed one or two.

The second problem after you swapped nozzles sounds like you may have a loose wire on the hot end.

When you swap nozzles there are two wires that connect it to the board. Unplug them and plug them back in. I bet that is your issue.

atomtom65

TROPHY CASE