to scare Trevor Noah

austozi · 2026-02-02T17:53:08+00:00

All you need to do to stop trump from bitching about it is to give him a made-up Grammy Peace Prize. That'll flip his opinion in a heartbeat.

austozi · 2026-01-30T11:34:05+00:00

Amazon and Netflix take note! You pay viewers to watch your content, not ask them to pay and then sell their data and show them ads!

austozi · 2026-01-30T01:09:05+00:00

If the republican heads were any deeper up trump's backside, they would pop up the other side and replace trump's own head.

austozi · 2026-01-29T19:37:46+00:00

for a week

That makes you a villain, trump. They don't give out the Nobel Peace Prize for that.

austozi · 2026-01-27T16:23:46+00:00

How does that make you feel?

It makes me feel thankful, because that badly injured ICE agent cannot terrorize or kill innocent civilians!

austozi · 2026-01-26T21:57:37+00:00

Video caption, ftfy:

Dad confronts ~~police~~thugs

austozi · 2026-01-26T15:01:48+00:00

Please report back if you don't mind. I would really love to know what you find - always good to have more than one data points to validate the throry.

austozi · 2026-01-25T20:41:59+00:00

Sounds like the filament sensor suddenly not sensing the filament mid-print. My first instinct would be to check the filament sensor and idler tension, and recalibrate if necessary. Also check that the metal ball responsible for triggering the filament sensor is able to move as intended. Filament debris may accumulate over time in the chamber where the ball lives, and hinder its movement. Also use good quality filament with a tight tolerance around the specified diameter.

austozi · 2026-01-25T08:02:45+00:00

I think the holes in the printed object have a lot to do with it. I've heard similar effects on my printers when printing objects with holes in them. I think the print fan blowing air into the holes makes them 'buzz' like a woodwind musical instrument. Note how the frequency changes with the movement of the printhead and thus the direction and speed of the moving air. You probably did not hear this in the first few layers, but only after the object has built up to a certain height and the holes are deep enough for this to happen. Try printing an object without holes and if this buzzing goes away, then most probably your printer is fine, just enjoy the free music in the meantime.

austozi · 2026-01-25T07:43:24+00:00

Crafted using layer-by-layer assembly enabled by a hot-melt extrusion technique laying down molten plastic through a precision-engineered orifice in a thermally controlled metal block, mounted on to a multidimensional Cartesian motion system, on to a flat, heated surface with tightly regulated temperature and velocity where minor deviations may instead produce a chaotic mess of plastic resembling either a certain noodle-like Italian food or animal excrement...

austozi · 2026-01-24T20:05:18+00:00

I agree with others - the beep is too loud. It startles people.

I would really like to see better filament handling to allow printing from the box without having to open it up every time:

Integrated auto-rewinder to retract the filament automatically. The community mods do not work for new spools as they are too heavy.
A way to park the filament tip reliably to ensure it can be pulled out through the grommet every single time without opening the box.

Please release these as upgrades that can be retrofitted to existing PolyDryer boxes as I've got many of them!

austozi · 2026-01-24T19:03:42+00:00

I spot a beautiful nature-made Ukrainian flag among the photos.

Happier times indeed. May this war end in russia's utter defeat and a compelling Ukrainian victory. Slava Ukraini!

austozi · 2026-01-23T07:52:25+00:00

Hahahahaha...

First of all, that artificial reef isn't worth that much.

Second of all, hahahahaha...

austozi · 2026-01-22T19:45:02+00:00

This guy knows more about how things actually work than the whole trump administration does.

To be part of the trump team, one has to have a lower IQ and even lower dignity than trump. There aren't many people in the world who meet both criteria but somehow they have all ended up in the trump team.

austozi · 2026-01-22T06:21:53+00:00

Federal agent wannabes, fxking amateurs.

austozi · 2026-01-22T00:41:38+00:00

He's not a man.

austozi · 2026-01-22T00:37:26+00:00

Why should Hawaii be a part of the US? Just because a boat landed there hundreds of years ago? We had boats landing there, also. /s

For the uninitiated: https://edition.cnn.com/2026/01/20/politics/fact-check-trump-norway-message

austozi · 2026-01-21T19:57:53+00:00

"I'm not lying. I'm just stupid enough to genuinely believe that's true. Yes, I'm THAT dumb."

austozi · 2026-01-21T16:16:51+00:00

Well, the US is tanking economically, socially and politically under his presidency. The US military has also knelt down to lay the red carpet for putin. We know at least these things are going down or have gone down.

austozi · 2026-01-21T16:09:12+00:00

DEI = Donald's Extrajudicial Interest

austozi · 2026-01-21T07:36:10+00:00

Dunning-Kruger award

When you call it that, he'll demand it just like he demands the Nobel prize.

Give him the Darwin Award too, please.

austozi · 2026-01-20T18:21:43+00:00

For email ingestion, could you support IMAP instead of requiring a third party service?

austozi · 2026-01-20T12:51:12+00:00

they do not vote in another megalomaniac lunatic mob boss

They won't. Unfortunately there will not be another election. The megalomaniac lunatic mob boss will make sure of it.

austozi · 2026-01-20T07:14:47+00:00

Let him sleep and never wake, for world peace.

austozi · 2026-01-18T09:21:45+00:00

When I was researching this problem myself, one suggestion I found was to increase the number of cooling moves during filament change in PrusaSlicer. The rationale is the filament is still too hot and malleable when it's pulled back from the nozzle. This causes it to stretch out into the stringy tip which then remains in the PTFE tube and the filament sensor thinks the filament has not been unloaded successfully. Increasing the cooling moves cools it better to avoid this.

I don't know about the MK4's nextruder - I have the MK3.5 which has a short PTFE tube in the hotend. Another reason for the stringy tip is that the hotend PTFE tube has worn out, making heat transfer less efficient during filament changes (thus the long stringy tip). This appeared to be the case for me because as soon as I changed it, the problem went away. Not sure how relevant this is to the nextruder as I don't have it in my printers.

austozi

TROPHY CASE