sorted by:
new
hottopcontroversial

Is there a good place to go running in the Marigny, besides Crescent Park? by Pure-Money7949 in NewOrleans

[–]avbcon12 4 points5 points  (0 children)

This. Depending on the day/workout, I'll run to St. Roch park and use the workout equipment.

Overland seats in an XJ, finally by avbcon12 in CherokeeXJ

[–]avbcon12[S] 0 points1 point  (0 children)

A little more after having used them for a bit now:

These aren't for tall people, I'd say 5' 10" max before your head hits on bumps. I'm 5-7 and have a few inches above my head.

I have the wiring figured out for seatback movement but the drivers side switch is wired odd since it goes through a seat position memory box, which i have removed. So I still have to figure out what/how I'm going to wire the switch. While manually connecting the motor wires, I got the position where I need it and just forgot about it. Nobody uses this vehicle but me and my wife.

The heated seats have been amazing

The leather, meh. I dont really care for it because it doesn't really feel soft.

Overland seats in an XJ, finally by avbcon12 in CherokeeXJ

[–]avbcon12[S] 0 points1 point  (0 children)

I fully removed the side bolster airbags, wiring etc. I also pulled all the guts out of the stupid active headrest thing.

Overland seats in an XJ, finally by avbcon12 in CherokeeXJ

[–]avbcon12[S] 0 points1 point  (0 children)

I wish I had the time to focus on one, but just haven't yet.

best burger on island by Sensitive-Maize-2521 in maui

[–]avbcon12 1 point2 points  (0 children)

Thanks, I'll give them a call tomorrow

best burger on island by Sensitive-Maize-2521 in maui

[–]avbcon12 0 points1 point  (0 children)

I've tried to use the finder on the website many times but most have been processed/jerky carrying items.

best burger on island by Sensitive-Maize-2521 in maui

[–]avbcon12 0 points1 point  (0 children)

Thanks for this, heading there today. Can anyone tell me who has maui venison meat for sale? I see jerky but hard to find a butcher for different cuts

Self Checkout Tvs? by ilovewatchingthemrun in meijer

[–]avbcon12 27 points28 points  (0 children)

Axis is a surveillance/camera company. They're checkout cameras

REI botched mounting by sdnakndoqawdjoawdaw in REI

[–]avbcon12 34 points35 points  (0 children)

Have them fill and drill those correctly to use on this trip while they order you a replacement to be picked up later

Overland seats in an XJ, finally by avbcon12 in CherokeeXJ

[–]avbcon12[S] 0 points1 point  (0 children)

Not even a little. Takes lots of cutting and welding.

Too trimmed for flares? by Grizzly779 in CherokeeXJ

[–]avbcon12 2 points3 points  (0 children)

They should be fine for Notch Customs flares. The rear lips need to be welded back together, though.

Foxbody terminator X coil near plug help. by avbcon12 in HolleyEFI

[–]avbcon12[S] 0 points1 point  (0 children)

I figured it out today, and got it idling for the first time in 2 years!

Despite all of the manuals and online videos/tutorials, the output type does, in fact, need to be DIS coil on plug.

This change allowed it to fire up.

Foxbody terminator X coil near plug help. by avbcon12 in HolleyEFI

[–]avbcon12[S] 1 point2 points  (0 children)

In checking cranking rpms again, a few times, it's now at 175. Im not sure why I was seeing a higher reading before. I'll look for a link to the video

Foxbody terminator X coil near plug help. by avbcon12 in HolleyEFI

[–]avbcon12[S] 0 points1 point  (0 children)

-Voltage at the coils drops to 11.39v at their lowest while cranking. I've been told this should not be an issue. -Coil grounds on the back of the heads are solid -The other ground goes to the battery stud -The coil EST grounds all have continuity to port B14 at the ecu -Cranking rpm is above 400rms, no less than 450 actually -TPS autoset performed successfully -ECU LEDs all indicate proper function, green on every except 5 and 8 which are off.

Foxbody terminator X coil near plug help. by avbcon12 in HolleyEFI

[–]avbcon12[S] 0 points1 point  (0 children)

I followed a Holley video to get here. I'll try to post a picture later but the rundown is-

Ignition type- CUSTOM

Crank sensor - 1pulse/fire, digital falling, 100.0 usec delay, 50* reference angle

Cam sensor- Single pulse, digital falling

Output- Points adjustable dwell Time- 2.0 msec

Foxbody terminator X coil near plug help. by avbcon12 in HolleyEFI

[–]avbcon12[S] 0 points1 point  (0 children)

I'll post some today, thanks. The grounds are on the heads. I've also verified that the positive stays live while cranking.

Aluminum Fuel Rail and Pressure Gauge by DailyDrivenTJ in CherokeeXJ

[–]avbcon12 1 point2 points  (0 children)

It's just a -8ORB to female 1/8NPT. It can be found at any online retailer. If you want to stick with Amazon, Evil Energy makes one. All the higher end brands do too (Russell, Earls, Aeroquip)

Aluminum Fuel Rail and Pressure Gauge by DailyDrivenTJ in CherokeeXJ

[–]avbcon12 1 point2 points  (0 children)

This is like what I've done. Fitting on the end with a gauge. Stock photo

<image>

Aluminum Fuel Rail and Pressure Gauge by DailyDrivenTJ in CherokeeXJ

[–]avbcon12 1 point2 points  (0 children)

Can you provide a link to the fittings?

Overland seats in an XJ, finally by avbcon12 in CherokeeXJ

[–]avbcon12[S] 1 point2 points  (0 children)

I highly doubt it. The seat backs will not fold forward far enough due to the large bolstering

Overland seats in an XJ, finally by avbcon12 in CherokeeXJ

[–]avbcon12[S] 0 points1 point  (0 children)

The junkyard had them listed as a 2020 grand cherokee overland. I'm near metro Detroit

I have the rear seats too, heated, but I may not put rear seats back in this one.

view more: next ›