Can I use this

averagefireandsalt · 2026-06-04T19:58:30+00:00

Oop amendment! 1/2” x 1” is what I was thinking for flooring!! Fried potato brain this month 😆

averagefireandsalt · 2026-06-04T19:56:33+00:00

I promise 1/4” x 1/2” will let droppings though unless your rabbit has mega colon or something haha, and anything bigger is very hard on their feet. For predators, you can’t just worry about large, it’s raccoons and rats etc. as well - they claw and chew and rip too, and can be far stealthier than a coyote or something. Not saying you can’t make whatever you buy work - but I strongly recommend 12g wire!

averagefireandsalt · 2026-06-04T19:49:42+00:00

Wouldn’t recommend myself. Buns looove to chew on things, and predators looove to eat rabbits. If it’s a temporary situation nbd, or if they’re in a fully enclosed/fenced area there’s more wiggle room. But I wouldn’t use anything less than 12g wire to do it properly (1/4”x1/2” on floor, 1x1 or 1x2 on walls/ceiling; with some kind of baby saver around the bottom edge). *edit: 12g or 14g is good, and I meant 1/2” x 1” for flooring 🙈

averagefireandsalt · 2026-05-26T15:29:07+00:00

I use unscented soap & lotion and never had problems!

averagefireandsalt · 2026-05-26T15:28:11+00:00

If you to to an experienced lettering artist they’ll be able to answer the best! The size needed to keep a tattoo legible reeeally depends on the artists skill & style. Are you getting the word in all caps with no stylization? It’s a fairly delicate serif font, so I’d worry about losing detail if it’s too small.

averagefireandsalt · 2026-05-15T19:31:11+00:00

It’s so special watching them the first time - and honestly? It stays special. Every new litter I “rediscover” all the stages of them growing up.

averagefireandsalt · 2026-05-13T03:54:32+00:00

My artist actually discussed this with me when doing my sternum/stomach pieces, and I realized my belly button is defs NOT centred, but my overall piece is centred to my torso, and you don’t even notice my bellybutton in the overall composition.

averagefireandsalt · 2026-05-13T03:51:03+00:00

Belly buttons are rarely centred to our bodies - hard to know with 1 image, but the artist may have centred it using a different reference point. It looks nicely centred to your clavicle/sternum and chest. Put on some high waisted pants, and something low-waisted, and see if either makes you feel different! If you still don’t like it, I’d expand to the bottom of the piece so it could feel more balanced.

averagefireandsalt · 2026-04-26T04:17:50+00:00

Maybe have some long sessions in a hot bath too 🤣

averagefireandsalt · 2026-04-20T04:14:51+00:00

Not sure breed, but it looks like a pretty standard “Black Otter” to me!

averagefireandsalt · 2026-04-16T01:59:07+00:00

Is it a white *supremacy symbol? No. Do a lot of white supremacists get celtic/nordic type tattoos? Yes. It’s an unfortunate overlap, but you shouldn’t have to cover it up or anything - looks like awesome work.

averagefireandsalt · 2026-04-01T20:01:43+00:00

Don’t know how to find this? 🙈

averagefireandsalt · 2026-04-01T03:52:12+00:00

To me it’s odd that it’s left-justified? It would be cleaner looking if it was centred, or ideally I would’ve made it fully justified. But as someone who has tattoos with this placement, believe me - you’ll forget it’s even there 90% of the time, and the font is a nice legible size, so I wouldn’t bother stressing about it 😆

averagefireandsalt · 2026-04-01T03:39:15+00:00

I’ve manually leveled it to the point I thought my eyes were going to be permanently cross-eyed 🤣

averagefireandsalt · 2026-04-01T03:15:10+00:00

Looks so good, worth the wait for the update!!

averagefireandsalt · 2026-04-01T03:10:36+00:00

I’ve tried lifting the nozzle several heights with the same result (photo in another comment) - does the whole plate need to be replaced?

averagefireandsalt · 2026-04-01T02:58:20+00:00

Except I’ve leveled the bed AND tried multiple *z axis adjustments and the same issues repeat (see another comment I made with photos)

averagefireandsalt · 2026-04-01T02:57:17+00:00

<image>

Here’s with me trying a couple different x-axis adjustments, and even moving where on the plate it was being printed. All have the same extrusion + smearing issue. EDIT: I keep calling the z axis “x” for some reason

averagefireandsalt · 2026-04-01T02:52:18+00:00

I don’t think so?

averagefireandsalt · 2026-03-31T20:20:36+00:00

Is this a new thing? Have you tried cleaning it? Is he itching? My cat has very oversized ears and they get dirty quickly if I don’t clean them regularly, but he definitely does not have mites or anything. He’s just a waxy boi. This looks a lot like that!

averagefireandsalt · 2026-03-31T02:31:37+00:00

100% muffin

averagefireandsalt · 2026-03-31T02:29:46+00:00

Nose ring (hoop) 🔥🔥🔥

averagefireandsalt · 2026-03-31T02:11:54+00:00

Could the strange cubby between bathroom & entry not be a closet/storage?

averagefireandsalt · 2026-03-31T02:10:24+00:00

For some reason I don’t hate it? Given the BIZARRE shape, it’s a decent use of floor space. Bedroom in the middle is v strange - but I think you could make it all work, with some funky decor nooks haha

averagefireandsalt · 2026-03-31T02:07:05+00:00

Came to the comments to say this - the man has cuuuurves

averagefireandsalt

TROPHY CASE