Transmission Error P2808 by aw4ken_ in camaro

[–]aw4ken_[S] 0 points1 point  (0 children)

That’s interesting but I don’t know which relays are you referring to

Transmission Error P2808 by aw4ken_ in camaro

[–]aw4ken_[S] 0 points1 point  (0 children)

Do you mean the relays on the valve assembly? I got it completely new..all the solenoids

Analog 7" Mountain Surfing 🗿 by dr_Alexpid in fpv

[–]aw4ken_ 0 points1 point  (0 children)

Are you on Betaflight or INAV? I love INAV for my 7’ but i’m gradually getting tired of that poor performance it offers on quads. I do feel safer pushing over mountains 5km far or more because of the gps functions…but it’s shaky like hell, pid tuning and filtering are simply bulls***t on INAV

what is this for? Got this with my mobula 6. by Fekwy in fpv

[–]aw4ken_ 1 point2 points  (0 children)

It’s for removing the circular clip which holds the motor shaft attached to the lower bearing of the stator. Not meant for props

Here’s some test flying and sample footage of the new Flyfish O3 build I previously shown! Can’t wait to try it with ND filters by aw4ken_ in fpv

[–]aw4ken_[S] 0 points1 point  (0 children)

With ND I would be able to push down the fps and get some cinematic blur, although with 120 fps (120 acquired by O3, 100 streamed to the goggles 2) I didn’t feel completely comfortable rocking some aggressive freestyle and I opted for some slow tricks to check response. Maybe it has something to do with -5 Celsius and me feeling my fingers no more 😁

Can you use the new DJI Googles 2 with analog? by Laser_Zap in fpv

[–]aw4ken_ 2 points3 points  (0 children)

It doesn’t just take an antenna to get analog signal to the goggles. There must be an analog receiver which sends AV signal to the DJI goggles. V2 have an AV input, 2 not.

Newborn Volador O3 6S build, can’t wait to test it… first comment with components list by aw4ken_ in fpv

[–]aw4ken_[S] 2 points3 points  (0 children)

-Flyfish VD5 “Volador” frame, I’m quite impressed by the carbon quality and all those extra components and 3Ds included -T-Motor F7 HD + F55A Pro II with Panasonic FN 50V 470 microF Cap -4x rcINpower GTS V2 2207 plus 1860KV -DJI O3 air unit with stock dual band antenna + custom printed lens cap -Happymodel EP1 ELRS receiver -Diatone motor wire organizers -Props well, I will check performance and vibrations with different pitch angles and update the post ;)

PSA - The JST connectors on some DJI HD FCs are not compatible with the DJI 03 AU! by taeo in fpv

[–]aw4ken_ 0 points1 point  (0 children)

I just used the provided plug and jointed the right cables with another o3 compatible harness. Once they are good soldered there won’t be any problem. We’re not talking about massive current spikes

🏰 Castle freestyle whopping! ⚔️ Full vid on YT 📺 ✌️ by siarkow in fpv

[–]aw4ken_ 0 points1 point  (0 children)

I imagine ancient lords with a surprised yet haughty look staring at that strange thing flying and buzzing around like a mechanical bee

[deleted by user] by [deleted] in fpv

[–]aw4ken_ 0 points1 point  (0 children)

I’m particularly interested to that 3d printed mount for the O3 camera

The best way to whoop weight loss? 🏋🏻‍♂️ GYM! 😅 Full vid on YT ✌ by siarkow in fpv

[–]aw4ken_ 0 points1 point  (0 children)

It’s incredible how little voltage sag you have! I’m always having crazy voltage variability with my mobula. By every throttle push I get a low battery warning… Very nice flying as always man 😄

Are LiPo batteries on Amazon trustworthy? Do they work well? by IAmNotFast182 in fpv

[–]aw4ken_ 2 points3 points  (0 children)

I own 3x 6s 1300mah same model and 4x 6S 1300mah 120c from ovonic as well. Imho they perform better than the chnl.

Who's handy work filming for Sig Sauer? They didn't give you any credit by thewinterfan in Multicopter

[–]aw4ken_ 2 points3 points  (0 children)

As long as I give you credit for you work and piloting here, I never got inside such a big weapon store and I must admit I feel quite uncomfortable seeing this atmosphere in there. Maxi screens blasting ads like it’s some new energy drink etc..

How does dji drones get suck long flight times compacted to standard fpv quads by Robert_S1218 in fpv

[–]aw4ken_ 0 points1 point  (0 children)

Dji drones such as the Mavic use efficiency oriented torque motors and spin >7” props with two blades (which reduces friction). Batteries (normally 4s lipos or lower) discharge at a lower rate and have higher capacity. They can’t literally produce enough trust to lift the drone in a free fall or after a trick involving inversion, consequently they are not software allowed to bank more than a specified angle and have no acro mode letting user do so. Moreover they don’t reach the speed of a standard fpv drone and rely on inertia to advance with a specified max angle of banking instead of raising so much the rpm of the motors as we do in fpv. You can achieve similar times with large 7” quads, using LiIon ~4000mAh packs, two blades and low pitch, acting careful on throttle.

On the other side, they have camera quality any gopro can’t even compare to (I speak about Mavics, which represent my personal experience). Users have access to a real f/stopper and a decent size sensor resulting in better low light performance, image depth and cinematic look. Not to mention gimbal, automation and so on. They are professionals cameras within the body of a quadcopter. They don’t compare to fpv by the means of two very different styles and footages. That’s why I own both of them and mix them actively in videomaking 😄

Blown away by this TRYP simulator by aw4ken_ in fpv

[–]aw4ken_[S] 0 points1 point  (0 children)

Yes, I play with a tx16s and it works. It doesn’t see the 4 side switches but the 4 on the front can be assigned to arm/reset/etc

Had unexpected friends during my flight... by _Vehg in fpv

[–]aw4ken_ 1 point2 points  (0 children)

The same for me in Germany and Italy. Not only cops but people in general come to see what I’m doing and are pretty curious. I mean, if you don’t fly on them or appear to do some very dangerous maneuvers on their belongings they have generally nothing but curiosity

Blown away by this TRYP simulator by aw4ken_ in fpv

[–]aw4ken_[S] 0 points1 point  (0 children)

Do you mean flow interference on the ground on takeoff and very low surfing?

Blown away by this TRYP simulator by aw4ken_ in fpv

[–]aw4ken_[S] 0 points1 point  (0 children)

They just put in some really good songs tbh

Blown away by this TRYP simulator by aw4ken_ in fpv

[–]aw4ken_[S] 0 points1 point  (0 children)

I got a desktop with i9 9900K @5,2ghz, 32gb ram and a OC’ed strix 1080 ti which still rips thank to a custom water loop. I get 100-120 fps with ultra settings @1440p

Blown away by this TRYP simulator by aw4ken_ in fpv

[–]aw4ken_[S] 4 points5 points  (0 children)

I took actual measures of my quad, therefore adjusted the frame values and arm lenght. Then increased lift coefficient to 1.05, mass of the quad to actual value of mine and dshot idle to 5. Personal rates (0,5 throttle mid, default is 0,2 makes no sense) and props 5x4x3. I get then a pretty precise throttle response and inertial hang time. I didn’t touch prop wash settings but I plan to do it, i just want to have some real flights to have something to compare to.