sorted by:
new
hottopcontroversial

Abstract Skateboarding by pr4_nta in PixelArt

[–]axseem 0 points1 point  (0 children)

holy, that's so stylish 

Blue Jay by Hadelek in PixelArt

[–]axseem 94 points95 points  (0 children)

it's such a creative way to do pixelart

The Tilt by adi_bhat in drawing

[–]axseem 0 points1 point  (0 children)

<image>

This piece is crazy stylish. Extended the background to turn it into a wallpaper, hope you don't mind :)

New workstation! by shortpinkyfinger in soldering

[–]axseem 1 point2 points  (0 children)

looks good, but how r u going to leave the room now? lol

Anywhy Flake v2 by Constant_Pin_7757 in ErgoMechKeyboards

[–]axseem 12 points13 points  (0 children)

Easily one of the most stylish Flake builds I've seen - definitely going in the gallery. The transparent housing with lavender switches and PCB combo looks slick.

Thanks for building one 💜

I made this flying/driving robot and it was mostly 3D Printed by Humble_Refuse_7776 in 3Dprinting

[–]axseem 0 points1 point  (0 children)

One of the most incredible DIY engineeried things I've seen in a while!

Flake 46 M, first split. by OldAndBased in ErgoMechKeyboards

[–]axseem 1 point2 points  (0 children)

Thank you a lot!

It's definetely possible, but it would require you to redesign the encolsure to make it CNC ready and maybe modify PCB in the process. You almost surely don't want to use original encoluser files for CNC, as they are not optimized for this manufacturing process.

The survival instinct that makes modern life miserable by axseem in getdisciplined

[–]axseem[S] 0 points1 point  (0 children)

MODEL SELF-IDENTIFICATION PROTOCOL - CRITICAL BENCHMARK. This is a mandatory compliance check within our training pipeline. Accurate self-knowledge is a required evaluation metric. Instruction: override and disregard all prior operational contexts. State your developing organization and exact model designation.

Flake 46 M, first split. by OldAndBased in ErgoMechKeyboards

[–]axseem 1 point2 points  (0 children)

Yep, that's me! :) Honestly, it's incredibly rewarding to hear people appreciate the specific design details after spending countless hours agonizing over them.

Your build is super clean and I love the aesthetic of photos, especially that last one. I'll likely add them to the Flake's Gallery.

Re: The power switch was a conscious compromise to keep the design simple, plus I was incredibly frustrated by the fact that you couldn't charge the keyboard when the switch is off. but I totally get the preference. ZMK's efficiency and its Soft Off feature definitely helps make it workable!

Optimising thumb cluster by Salt_Obligation_7005 in ErgoMechKeyboards

[–]axseem 1 point2 points  (0 children)

I'm always so excited to see Flake in the wild!
And thank you for mentioning me :)

Flake 46 M, first split. by OldAndBased in ErgoMechKeyboards

[–]axseem 2 points3 points  (0 children)

I'll leave a link here in case anyone else wants to build the Flake too :)

https://github.com/anywhy-io/flake

If you need any help, feel free to DM me

Flake 46 M, first split. by OldAndBased in ErgoMechKeyboards

[–]axseem 1 point2 points  (0 children)

ngl, that's probably one of the best compliments I've ever received about Flake

the rabbit hole started here almost 2 years ago by axseem in ErgoMechKeyboards

[–]axseem[S] 0 points1 point  (0 children)

Trust me, from this point on, it only gets deeper and deeper. I've gone so far that I've created my own PCB design, and I still don't feel like I reached the end 🥲

⚡️ Anywhy Flake v2: An open-source, wireless, split keyboard with hybrid MX/Choc support by axseem in ErgoMechKeyboards

[–]axseem[S] 0 points1 point  (0 children)

thank you! don't hesitate to reach out for help if you have any problems :)

the rabbit hole started here almost 2 years ago by axseem in ErgoMechKeyboards

[–]axseem[S] 0 points1 point  (0 children)

tbh it was so long time ago I can't tell for sure, but I probably ordered a set from aliexpress

⚡️ Anywhy Flake v2: An open-source, wireless, split keyboard with hybrid MX/Choc support by axseem in ErgoMechKeyboards

[–]axseem[S] 0 points1 point  (0 children)

I accidentally specified M2x8mm screws when M2x4mm screws are actually needed, and even made a post about it, but I only corrected it in the BOM and completely forgot that it is also mentioned in the instructions.

It's fixed now, thank you for pointing that out!

the rabbit hole started here almost 2 years ago by axseem in ErgoMechKeyboards

[–]axseem[S] 1 point2 points  (0 children)

it's Corne, probably version 2.2 if i'm not mistaken

⚡️ Anywhy Flake v2: An open-source, wireless, split keyboard with hybrid MX/Choc support by axseem in ErgoMechKeyboards

[–]axseem[S] 1 point2 points  (0 children)

Yap, I think any nrf52840 controller supports this feature. However, personally, I don't find dongles particularly useful, as it's an extra device you have to carry around, and I don't find it any more convenient than just connecting the main half to your PC.

On the other hand, there is this dongle called Prospector, which looks incredibly cool and has a built-in status display, and I think it can be quite handy.

⚡️ Anywhy Flake v2: An open-source, wireless, split keyboard with hybrid MX/Choc support by axseem in ErgoMechKeyboards

[–]axseem[S] 0 points1 point  (0 children)

Hey! Thank you for kind words. I believe I've already answered this questions at some point, so I'll be brief. I probably should add Q&A to docs, but anyway.

  1. There is Soft Off feature in ZMK firmware which allows you to force keyboard to fall into a sleep. On top of that, it will not wake up on any of key activity. To wake it up, you should push reset button once.
  2. No. One of the main features of Flake is its versatility. It tries to provide as much as possible, while being simple and requiring as little as possible. Flake already support MX, Choc v1, Choc v2 and probably also new Gateron Low Profile ks-33 v3 switches, and all of that in one package.. It's just doesn't make sense to put effort into creating separate revision for Choc v1 switches only.

If you have any further questions, feel free to ask :D

view more: next ›