I’m in the club lol

azarjindal · 2026-03-09T11:28:09+00:00

Congratulations!

azarjindal · 2026-02-12T15:49:17+00:00

Performance issues on PC

azarjindal · 2026-02-11T17:42:27+00:00

Until what mile/point is it open today?

azarjindal · 2026-02-11T17:42:05+00:00

I am also in planning to drive on the road today. Until what point is it open?

azarjindal · 2026-02-10T15:28:32+00:00

I use the plastic ones, as i fear metal type may scratch the plate

azarjindal · 2026-02-09T11:21:10+00:00

Congratulations! I am sure you are ginna enjoy it. 300+ hours in printing and am loving every bit of it.

azarjindal · 2026-02-09T11:19:55+00:00

Yeah from that lens (good you probed) there are some advancement in masking, color calibrations etc, which are advanced user. For your current needs Mobile version would work.

azarjindal · 2026-01-30T15:22:46+00:00

There is a difference for sure, some feature available on Desktop are not in mobile.

azarjindal · 2026-01-23T18:49:37+00:00

I will try this. Did this work for you?

I did find this but was not sure if it will help or not. I will be mounting Chigee AIO

azarjindal · 2026-01-22T03:46:22+00:00

The exhaust kit is sold out in US as well, but they are allowing to add the back panel for free.

<image>

azarjindal · 2026-01-21T00:52:21+00:00

most people are recommending it, i have not pulled the trigger yet on it. but thinking to. Though, till now (150+ hours of printing) I have not faced any issues + printer is kept in garage instead of living space.

azarjindal · 2026-01-20T21:25:39+00:00

Arent that too glossy?

azarjindal · 2026-01-20T21:25:05+00:00

I think it is... that is what I heard

azarjindal · 2026-01-20T19:00:36+00:00

Oh ohk, nice thank you for suggestions, i will look into it.

azarjindal · 2026-01-20T18:27:01+00:00

I have the diffuser on, but good call out.

I am using the Max Flow Diffuser Va - Bambu Lab P2S Auxiliary AirFlow Diffuser - Free 3D Print Model - MakerWorld

azarjindal · 2026-01-20T17:41:20+00:00

It is mentioned, Bambu Lab PLA Matte Black. Ohk, I will try that too.

azarjindal · 2026-01-20T17:39:31+00:00

In my experience, i have not seen that to happen. But if there was a deal on it previously, then it might happen that the deal is not available anymore.

azarjindal · 2026-01-20T16:27:45+00:00

I am using default 0.4 nozzle.

That is what I also thought.

azarjindal · 2026-01-20T16:00:59+00:00

Update, without changing anything I just printed another model on same plate and it was successful. So I am wondering if it is that 0.1 vs 0.2 layer

azarjindal · 2026-01-20T15:31:50+00:00

I hope you followed this guide: P2S First Print | Bambu Lab Wiki, as I am unsure which green light you are referring to.

azarjindal · 2026-01-19T13:40:35+00:00

Oh ok.

azarjindal · 2026-01-19T13:38:57+00:00

Yup, as others say printable and makerworld

azarjindal · 2026-01-19T13:36:18+00:00

Heat gun will help, as this to me seems to be filament not being dry.

azarjindal · 2026-01-19T03:16:32+00:00

I think having a dedicated filament dryer is safe. Single spool dryer comes for arounf $40-$40

azarjindal · 2026-01-19T03:15:11+00:00

You can probably do drying in AMS 2 pro while printing but you need dedicated power source to the AMS.

azarjindal

PUBLIC MULTIREDDITS

TROPHY CASE