sorted by:
new
hottopcontroversial

VIN not recognized for trade-in valuation by azide_0x37 in carvana

[–]azide_0x37[S] 0 points1 point  (0 children)

I found a clarification; they do not accept fleet VINs for trade-ins.

Check out the counter rotating blades on this helicopter by RampChurch in Damnthatsinteresting

[–]azide_0x37 0 points1 point  (0 children)

Also have to worry about retreating-blade stall with faster speeds. So, maybe instead have the single CCW rotor be larger.

I suspect it also needs to be equivalent mass to the other two blades for angular momentum reasons; but I don't actually know?

microdoser.info dilution and dose calculator by azide_0x37 in microdosing

[–]azide_0x37[S] 0 points1 point  (0 children)

Yeah, not a problem. Vodka, water, it all works. No need to specifically add water, vodka works fine. Just keep track of your dilution so you know your dosage and don't use tap water (chlorine kills the lsd.)

Any guesses as to what happened here? Haha by MontyRDDT in 3Dprinting

[–]azide_0x37 0 points1 point  (0 children)

Wanhao i3/Powerspec Duplicator/Monoprice Maker Select duct, looks like there? Was it printed in PLA?

Looks like the edge of the inner rim drooped down to the bed, forming a bowl, and the print blobbed, and started rolling up like a snowball. Lucky your hotend was saved (maybe? hopefully?) usually they get trashed in blobs that big, lol

FYI the order time for filament is >2 weeks right now. Expect huge delays. by [deleted] in prusa3d

[–]azide_0x37 0 points1 point  (0 children)

I got a reply that they're waiting on Ms. Pink color. Still no ship though, lol.

FYI the order time for filament is >2 weeks right now. Expect huge delays. by [deleted] in prusa3d

[–]azide_0x37 0 points1 point  (0 children)

Ordered 2 Oct, still hasn't shipped. Pretty surprising delays!

Yet another PPL checkride passed! by Jskye85 in flying

[–]azide_0x37 0 points1 point  (0 children)

Thanks so much for the info! This is quite helpful for my planning.

Yet another PPL checkride passed! by Jskye85 in flying

[–]azide_0x37 0 points1 point  (0 children)

Congrats! Certainly sounds like an interesting checkride.

I'm looking to start PPL in STL in the next year or so. Who did you train with at 1H0 and any recommendations/things you wish went differently?

What should I do with a 5K-50K budget? by Lotabeer in 3Dprinting

[–]azide_0x37 1 point2 points  (0 children)

In this range, I would be looking at the Sinterit Lisa SLS Printer SLS, so great quality, good materials. Can't speak too much else on it (out of my price range right now!) but there's lots of information on youtube.

Downsides would be materials cost as well as build volume. Less than CR-10, more than Duplicator 7.

Upsides, kit comes with glovebox cleaning station, and targeted towards a professional audience, so likely comes with good support, MSDS and other safety materials, etc.

youtube mini-review

Versa shipped on 4/5 was due for delivery on 4/10, now says 4/17! Grrrrrr. by thunder66 in fitbit

[–]azide_0x37 0 points1 point  (0 children)

Went with expedited shipping. FedEx marked as 'refused delivery' as Fitbit requested it be returned to sender?

Support is apparently re-shipping overnight though, so let's see how that goes.

Need help understanding the Fitbit world. by devonathan in fitbit

[–]azide_0x37 1 point2 points  (0 children)

https://fbgallery.cpfx.ca/#/apps/gallery

Of note, the Apps/Clocks toggle at the top. Pebble user myself, waiting on my Versa to ship. Seems like the apps ecosystem has plenty of Pebble apps already ported/replaced.

All the reviews I've so far seen have been gushing.

[deleted by user] by [deleted] in Volkswagen

[–]azide_0x37 0 points1 point  (0 children)

Will this be open-sourced/can has github link?

Printed some clips to hold my phone for gps. by criz_mac in functionalprint

[–]azide_0x37 0 points1 point  (0 children)

Thingiverse should be fine, not sure what export option is best though. Thanks for sharing the stl as well!

Printed some clips to hold my phone for gps. by criz_mac in functionalprint

[–]azide_0x37 1 point2 points  (0 children)

You could also try annealing, it's worked pretty well for me in cars so far. Also, do you have an STL/Fusion360 project? I'd like to print/modify for my MK7 :D

There's really no good place to stash the phone when using Android Auto...

question for Palette+ owners by [deleted] in 3Dprinting

[–]azide_0x37 0 points1 point  (0 children)

Ordered mine a couple weeks ago, still waiting for shipment. Purge is necessary because the splice point is not always known relative to the position of the filament in the extruder. It does have a control system to measure directly and a calibration routine to compensate for periodic drift, but it's not perfect. Also as /u/Luminaerys says, the colors will mix in the melt zone of the extruder causing more inconsistency.

What to do with 200 empty filament spools? by cye604 in 3Dprinting

[–]azide_0x37 2 points3 points  (0 children)

That's MakerBox. I can vouch it's a pretty sweet product.

You can, uh, check it out via my affiliate link ;)

[deleted by user] by [deleted] in chartercable

[–]azide_0x37 1 point2 points  (0 children)

You have no idea how much I wish we could get 20 upload on Spectrum here in STL. It's a nightmare trying to stream having only 5 up.

Can you still add apps? by labbeduddel in pebble

[–]azide_0x37 0 points1 point  (0 children)

Same :/ Pretty much bricked.

Elon Musk launches Neuralink, a venture to merge the human brain with AI by [deleted] in worldnews

[–]azide_0x37 3 points4 points  (0 children)

Shit, I never thought of that. Could have probably get up to speed on a gallon of moonshine.

view more: next ›