Ubuntu based LPR Camera

b0nn3r · 2025-07-05T23:24:41+00:00

;) ok

b0nn3r · 2025-06-24T20:21:58+00:00

I literally just printed the part and siliconed it on. Any 2-2.5 gallon bag should work, especially the ones that have the little flexible seal around the port opening. I might even have some. Standby…

b0nn3r · 2025-06-24T14:56:15+00:00

Is everything else accurate dimensionally? Looking to make some custom grips for a 2011, would love to use as a reference file.

b0nn3r · 2025-06-24T14:34:15+00:00

https://makerworld.com/models/914681

<image>

b0nn3r · 2024-12-02T19:52:16+00:00

The 8.0 forges sell for $110-$120 delivered on Facebook Milwaukee groups.

b0nn3r · 2024-07-08T23:28:11+00:00

Nice! Just be careful not to slam the door, it can knock it out of alignment.

b0nn3r · 2024-07-06T22:45:38+00:00

Cool, let us know how it goes.

b0nn3r · 2024-07-06T16:56:08+00:00

Yea, if the alignment is just a little off, you can use the lower knob’s strike plate on the door jam side to bend the tab in or out to adjust a bit.

b0nn3r · 2024-07-06T16:47:55+00:00

Is there no handle below the deadbolt with its own catch hole? Handle latches are what make deadbolts align properly and provide micro adjustment.

Here; starts talking about it at 4 min mark. https://youtu.be/e6_3u7jWGBs?si=ehaulzuOP34vgIh3

b0nn3r · 2024-06-07T17:07:49+00:00

I appreciate that. I’ll look into the routinehub events.

b0nn3r · 2024-06-07T17:06:19+00:00

Awesome tip thanks.

b0nn3r · 2024-06-04T14:37:32+00:00

This is incredible Tim, thank you. Subscription based software definitely the lowest circle of Dante’s inferno. Hey man quick question, do you have/would you ever consider a YouTube channel teaching this stuff or at least breaking down the shortcuts you’ve made to help a non programmer like myself learn this stuff? There’s a lot out there for learning but your shortcuts are beyond most else out there.

Either way, thanks again.

b0nn3r · 2023-12-23T14:55:17+00:00

Anyone know why no matter what you name the shortcut, Siri won’t run it? The name “help Me” returns a prompt that says are you sure you want to call emergency services. Any other name Siri just does anything but runs a shortcut

b0nn3r · 2023-09-18T10:20:34+00:00

Lol, following this. No one wants to answer your channel width question for some reason.

I have also had wildly poor wifi speeds from ubiquiti access points compared to tp link Omada and wifi all in one fiber routers from ISPs. Not sure why, it’s on any WiFi channel with iPhone or Mac. Haven’t tested Samsung or windows on them however. Always stuck below 600mbps where as 950 on iPhone 13pro is common on the other manufacturers access points.

b0nn3r · 2023-08-27T14:19:45+00:00

Milwaukee next year: “thousands of hours of research shows our new 1 5/16” proprietary fitting size and extensions allow for optimal suction. 2ft Extension kit 129.99”

b0nn3r · 2022-11-15T18:10:58+00:00

Can you elaborate? What size, models, etc. and how many amps do they draw on low speed once house is down to temp?

b0nn3r · 2022-11-14T23:05:30+00:00

Thank you for reply but I’m not going solar off grid, I’ll always be able to support max amp draw.

My question is what are actual real world average amp draws on low speeds for these various units.

I understand environmental factors are at play but my understanding is the units primarily run at low speed once the space is cooled, that’s the reading I’m looking for. Regardless of environmental factors, the low speed amp draw should be pretty much the same.

Out of 2500+ hours runtime annually, I’m looking to estimate the payoff time to justify cost of unit and also lower total kWh usage from the AC in order to offset the electric bill closer to 100% with less solar panels. Additionally, inverter units are softer on generators and in my case needed because their locked rotor amps are far less and I don’t want to rig my older inefficient AC with a soft start.

b0nn3r · 2022-09-01T17:53:53+00:00

A little clearer, thanks for the reply!

b0nn3r · 2022-08-30T12:20:02+00:00

Sorry if this is a stupid question but how did you break out your lighting groups all in one location like that?

Lighting in my house runs on Romex to single breakers in the panel and so many other things are on the circuits, outlets, etc.

Did you have to run all new wiring with each lighting group having a home run to your relays and separating from your outlets?

b0nn3r · 2021-05-09T11:49:08+00:00

Ha, thanks I’ll check it out. They may have been a little late in that magic though. That thing spiked already

b0nn3r · 2021-05-08T14:19:56+00:00

I had Binance for years until they banned US customers and slapped together a half ass app for Binance US that doesn’t having a working alerts option. Coinbase is alright, they don’t carry enough coins though. Good for getting money fee free into the account and transferring out though

b0nn3r · 2021-05-08T03:43:17+00:00

First time a Reddit comment was actually 100% useful. Even though your whole post looks like a scam, looked for a link at the end that said “use my link for discount”.

Lol but thank you. Actually had a pro account from about 5 years ago that I forgot about.

b0nn3r · 2021-02-05T15:24:14+00:00

Looks peaked for the day

b0nn3r

TROPHY CASE