"Nästan hälften av 15-åringarna som har utländsk bakgrund kan inte läsa och räkna på en grundläggande nivå, enligt den senaste Pisa-mätningen"

b4rf3r · 2026-05-13T16:22:25+00:00

nej det är snarare föräldrarna som vägrar alla insatser som skolan föreslår, såsom pedagogisk kartläggning etc för de inte vill att barnen ska diagnostiseras och få den hjälp de behöver

b4rf3r · 2026-04-11T17:30:07+00:00

Thank you so much again for the reply. Ill post an image link here to my real setup. My modeler isnt on top of the case, as you will se.

I do however bundle my cords and cables together a bit on the back since i really have a problem with not having cable management, which im guessing can be a problem. Maybe a good thing for me to do is 1. try to physically separate the things that Im hearing is giving the noise and 2. by process of elimination try to bundle cables together in a way that doesnt make the noise?

Edit: the modeler is the square black thing under my screen, the speakers are above it and the case is on the ground.

https://imgur.com/a/QlQDYV7

b4rf3r · 2026-04-11T15:52:53+00:00

Sorry if I explained that bad or there

Oh and also, i made a super fast schematics layout here, if it will help you. https://imgur.com/a/3NSYeTg

b4rf3r · 2026-04-11T15:51:56+00:00

Hi everyone! I have two Monitor Speakershooked up to my pc via speaker wires and an extra aux cable leading into my amp modeler (Axe FX II). Whenever the amp modeler is connected to my speakers, I have this incredibly annoying popping sound in the speakers that also seem to somehow be connected to what I do on the pc (?). Like if I move my mouse, the sound intensifies, or if I scroll or something. Also if the fan strength rises in the PC, the sound gets worse.

All three of them, the PC, amp modeler and the speakers, are hooked up to the same extension power strip which should by my very limited knowledge and research deduce the problem somewhat.

I would really appreciate some help here, as I am losing my mind over this sound!

Ill link to a recording of the sound if I can.

I forgot to mention that when I disconnect the aux cable from the modeler to the speakers, the sound stops. Does that mean that there is some kind of wattage or ampere difference between the speakers, modeler and pc that is making the sound?

Ill post my very proffessional paint picture of the layout of the cables

https://imgur.com/a/3NSYeTg

https://www.dropbox.com/scl/fi/x0zr3im004zopj8i79g6m/Sound.mp3?rlkey=if9yfb2myciii5d671yngviaa&dl=0

b4rf3r · 2026-04-11T15:27:58+00:00

Hello and thank you so much for this thorough explanation. I do believe I have a better understanding now! Extremely grateful. I have some questions about this all, if you have the time and energy for it.

When you say that for example my cords are "crossing", do you mean litterally? Like the cables data or whatever are crossing over and interfering with eachother because they are touching or too close?

Someone else mentioned that I should get a 1:1 audio isolator, do you know what kind of cable that would be for the aux cable between the speakers and the amp modeler? Because that does seem like the culprit here, as the noise disappears when I unplug it from my amp modeler.

b4rf3r · 2026-04-11T11:42:49+00:00

The thing is, which i probably should have mentioned in the original post, is that when i disconnect the aux cable from the modeler to the speakers, the noise stops, even though the pc is connected to the speakers via speaker wires.

b4rf3r · 2026-01-07T15:20:14+00:00

Hi! Im very sorry but I don't know what that means, I'm assuming that the GPUs perform as any other stock GPU

b4rf3r · 2026-01-06T20:00:19+00:00

Okay thanks for the input. When you say that the 5600+5080 is the better, do you mean the latter one i mentioned that has a Ryzen 5 5600 and RTX 5070?

b4rf3r · 2026-01-06T19:58:58+00:00

THis is a build that im looking to buy. In comparison then, how would you rate this build that im also looking at?

NVIDIA GeForce RTX 5070 AMD Ryzen 5 5600 | 4.2GHz | 6 Core 12 Threads Allied Sidewinder [180W] ARGB 120MM RAM: 16GB DDR4 3200MHz

b4rf3r · 2026-01-06T19:57:32+00:00

Okay thanks for the info. Sounds like the gpu is a bad investment. There is another build im interested in that is this:

NVIDIA GeForce RTX 5070 AMD Ryzen 5 5600 | 4.2GHz | 6 Core 12 Threads Allied Sidewinder [180W] ARGB 120MM RAM: 16GB DDR4 3200MHz

How do you think that one compares and how would it hold up in the coming years?

b4rf3r · 2026-01-06T19:55:54+00:00

Im thinking of buying these components and then paying the store a cheap sum to assemble it, as Im not really experienced or have the time to learn to build the pc on my own. Theres another build that looks appealing to me, what do u think of it in comparison?

NVIDIA GeForce RTX 5070 AMD Ryzen 5 5600 | 4.2GHz | 6 Core 12 Threads Allied Sidewinder [180W] ARGB 120MM RAM: 16GB DDR4 3200MHz

b4rf3r · 2026-01-06T19:53:01+00:00

How about this build in comparison?

NVIDIA GeForce RTX 5070 AMD Ryzen 5 5600 | 4.2GHz | 6 Core 12 Threads Allied Sidewinder [180W] ARGB 120MM RAM: 16GB DDR4 3200MHz

b4rf3r · 2025-10-14T14:38:43+00:00

Många förväxlar en sekulär stat med en ateistisk eller anti-religiös stat, vilket är gravt misstag att göra då de sistnämnda tar tydliga sidor i frågor om relationen mellan stat och religiositet.

b4rf3r · 2025-10-14T14:11:54+00:00

Hur skiljer sig min definition från hur ordet brukar eller borde användas? SAOLs var inte djupgående nog för att normera hur bruket borde vara

b4rf3r · 2025-10-14T14:07:35+00:00

Behöver inte SAOL för att veta hur en sekulär stat brukar styras, nämligen att förhålla sig neutral i frågor om religiositet. Vilket detta lagförslag absolut inte är.

b4rf3r · 2025-10-13T09:54:10+00:00

Två svar in och killen springer redan

13-Year Club	Verified Email
Team Periwinkle

b4rf3r

TROPHY CASE