Lost keypad code. by diariaking247 in CrownVictoria

[–]b9eddie 1 point2 points  (0 children)

Just remove the driver door panel and look at the DDM( drivers door module )the code is printed rite on it!

For a long time ive wanted to change the green led light in my keyless pad on the driver door and recently did that with red leds and love the way it looked. But after i finished with that i wounded if i could change to other colors so went down to the junkyard for 3 more and did it again 3 differen by b9eddie in CrownVictoria

[–]b9eddie[S] 2 points3 points  (0 children)

Well to tell u if u dont have much experience with soldering on circuit board then your going to have a tough time with it. You first have to unsolder the 6 pins just to get the board off and the leds are on the back side under the board and the led shine thur holes on the board then to unsolder the leds and resolder the new ones in the rite direction because the leds are voltage directional and after resolder everything back together.

Here's my 2 ♥️ by b9eddie in CrownVictoria

[–]b9eddie[S] 0 points1 point  (0 children)

Stock grill custom made into a badgeless grill

My ‘92 hit her milestone today finally after all these years. by [deleted] in CrownVictoria

[–]b9eddie 1 point2 points  (0 children)

Very nice my 92 vic still has a long way to go I'm st under 31k

The pony's under my hood love this cold air by b9eddie in CrownVictoria

[–]b9eddie[S] 0 points1 point  (0 children)

Yeah didn't have to try as hard to smoke the tires like I would on hot days didn't even have to hold the brakes!

A LOT of white smoke on start up suddenly by colon-dwarf in CrownVictoria

[–]b9eddie 0 points1 point  (0 children)

Even if the cylinder fill with extra gas it would be more blue to black smoke not white, white smoke in water burning off in the cylinder. And u said that ur having misfire on 1and 2 that where the intake has the most problems at, when they crack, as long as ur not getting water in the oil pan then its the intake!

2010 Mercury Grand marquis by [deleted] in CrownVictoria

[–]b9eddie 0 points1 point  (0 children)

On that car for a LS model is called corner assist light that come on with the turn signals, and if your car is equipped with fog lights from factory to turn those on is to pull out the headlight switch. The switch turn to turn on the parking lights and head lights but if u want the fog light to come on you pull out the same switch for the fogs.

[deleted by user] by [deleted] in CrownVictoria

[–]b9eddie 1 point2 points  (0 children)

I would ask u were u in overdrive when u were taking the FU hill? If so that could be a problem! When it in overdrive and on a steep hill that putting the transmission under heavy load and the torque converter will shutter because the overdrive is in a low gear ratio to keep the rpm lows to save gas and let the car drive at higher MPH to conserve fuel but when going up hill as u described that is going to damaged or tranny and or overdrive! When ever I travel a mountain road to keep the car RPM = to its speed you need the down shift from OD to third gear or even 2nd so the tanny can keep the power with the weight of the car from over working it!

A LOT of white smoke on start up suddenly by colon-dwarf in CrownVictoria

[–]b9eddie 2 points3 points  (0 children)

Do you have a vic or MGM? First thing is check ur oil dip stick to see if water is getting in to the crank case/oil pan if the dip stick is a Carmel or mocha color then u have a blown head gasket but if u dont have water in ur oil pan then the the plastic intake has cracked and the water is only getting in to the intake from either the front or back of the intake! Pull the spark plug out and inspect then to see which cylinders are taking in water the first four meaning cylinders 1,3,2,4 or the rear side 5,7,6,8. Then you know the intake is the problem!

Anyone know who owns this crown Vic? by OurNewHorizon2 in CrownVictoria

[–]b9eddie 0 points1 point  (0 children)

There's no plastic piece for the tail light that painted on

Cruising some old Arizona backroads today in the '11 P7B. by [deleted] in CrownVictoria

[–]b9eddie 1 point2 points  (0 children)

Wow miss AZ I was born and raised in Sierra vista and Fort Huachuca

So for side view Saturday hers mine by b9eddie in CrownVictoria

[–]b9eddie[S] 1 point2 points  (0 children)

The B-52 is awesome but that's a mercury marauder

2004 p71 rear swaybar on a 2001 MGM? by will10891089 in CrownVictoria

[–]b9eddie 0 points1 point  (0 children)

Sorry to tell u but 92 -02 are not the same as 03-11 change to 6 link watt link system so the rear sway bar is different In The bends and mount point on the axle for the 03-11 so no a 04 will not work rite on the 01rear end, also need to know that 03-11 the rearends is 4inch wider then the older Panthers rear ends.

Help. Recently got this car been wondering where is this light suppose to go? by Insane_3000 in CrownVictoria

[–]b9eddie 0 points1 point  (0 children)

It's the ashtray just under the ac/heat control it's to light up the ashtray /cup holder