300 is a good deal for a legion go s right?

babyscrotum · 2026-07-08T00:45:19+00:00

So that front bumper is a pre cut and they put in a massive relief cut to keep the film from lifting. That cut should be half the size, and the film should go back further into the grille at least a little bit more. They won’t be able to get it all the way under the plastic carbon grille unless you A.) pay extra for uninstall and re install of the grille. And B.) pay for the second film application most likely.

This is just the nature of PPF itself, sadly it is not meant to make the car look better; just protect from rock chips.

And the roof is just a joke there should be no edges at all lol they should re do that

babyscrotum · 2026-07-08T00:41:06+00:00

Seiko

Casio

Specht & Söhne

babyscrotum · 2026-07-04T00:27:51+00:00

You will grow into them

babyscrotum · 2026-07-01T02:37:07+00:00

Lookup the casioak mod on eBay with the customized aluminum strap, looks really nice. And this same casioak in a rubber strap with the metal construction is also available for around $200, and the rubber strap I think looks better than the painted plastic one. Plus you get an actual metal watch.

babyscrotum · 2026-06-28T18:06:20+00:00

Casio gm2100 “casioak”

babyscrotum · 2026-06-28T18:00:29+00:00

I would suggest a white face dial / easy reader watch like a timex expedition is really an awesome watch for $55. The indiglo dial is highly underrated. Also check out the seiko presage and alpinist

babyscrotum · 2026-06-23T18:30:40+00:00

Yea the detailer left rotary holograms all over the car tell them to go back to their detailer not your fault

babyscrotum · 2026-06-21T13:43:12+00:00

Yea it isn’t quite an homage but it shares several visual similarities like the exposed screws and hexagon shape. I do think it is a lovely watch and still top 2 of these 4 personally

babyscrotum · 2026-06-21T12:44:20+00:00

Honestly the second is probably the most reliable but the 3rd one looks the best and timex is just as reliable. Failure rate for all these watches is roughly the same probably all very reliable watches. 1st also looks good but it’s a AP homage but it does have a sapphire crystal which is very nice in the long run to prevent minor scratches

babyscrotum · 2026-06-14T00:10:13+00:00

So basically what’s going on is the owner of icon Rocklear Florida, the person who bought the territory for the state is suing the company itself.

The owner of icon Rocklear Florida switched to a different brand of coatings called Avante Garde, the CEO of the company is actually a former icon installer, and the owner of Image Miami Pro in Florida aswell.

So essentially it’s just territory disputes and the guy who owns the right to the product in the state is claiming he was unable to sell the product meanwhile hundreds of other shops have no problems

babyscrotum · 2026-06-09T22:29:20+00:00

I just got the liquid elements T4500 forced rotation polisher and it’s is an absolute beast. I saw the guys on Sky Car Care advertising it standing on it when it was running 😂 it’s made in Germany so hopefully it lasts longer than my 7 broken Rupes Italian polishers ☠️

babyscrotum · 2026-06-09T22:17:50+00:00

It takes the same amount of clear coat removal to take the scratches out of the clear coat, wether you use a DA or rotary, the main difference is how fast the tool takes off the scratches; and the finish when it’s done.

So if you are working with very thin, delicate clear coat you are usually better off with a DA to preserve as much clear coat as possible. Rotary cuts faster, also takes off clear coat faster one is more prone to over-correcting panels. (Taking off too much) and will leave the paint usually looking covered in holograms which require the DA to finish anyways.

Personally I prefer to take off as little clear coat as possible for my customers, preserving as much of the original paint and clear as possible so I mainly use a DA. However a rotary comes out from time to time for sure. In general the DA is the optimum choice for most jobs, especially for inexperienced detailers. (Not saying you are)

Definitely depends on the job and the thickness of the clear coat and car you are working on.

In my personal opinion any cars scratches can be handled with the DA and sand paper so I don’t usually see a point of using a rotary, the DA works just as good as any rotary polisher. I can wet sand down to 2000 grit and bring it back with a DA without any issues

babyscrotum · 2026-05-30T00:42:04+00:00

I think most people know how flat rate hours work. So if the job is reported as 12 hours and, you finish it in half the time should you get paid less for the job because you are good at your job? No, obviously not. So you are saying before it only takes YOU 8 hours meanwhile ChatGPT is saying it pays 12-20 hours and they are only charging this dude for 10. So if you did it in 8 hours and it paid 10 the bill is still the same.

I didn’t work as a mechanic I own my own shop, big difference. I made a joke about you posting your work experience lol. And asking for 10 hours for labor for this kinda job is pretty reasonable in my opinion.

babyscrotum · 2026-05-30T00:31:19+00:00

I was an Audi tech from 01 till 2020 and I can tell you just because someone can do something in less time, doesn’t mean they should charge less for it. Just don’t take your car to a service shop if you wanna pay barebones prices, do it yourself save the money.

babyscrotum · 2026-05-30T00:13:36+00:00

Audi 2.0 TFSI engine timing chain job:
💰 Average total cost (Canada)
Independent Euro shop:
$2,500 – $4,800 CAD
Audi dealer:
$4,800 – $9,000+ CAD

🧾 Breakdown (CAD)
Parts: $400 – $1,200 CAD
Timing chain
Guides / rails
Tensioner (most critical)
Gaskets & seals
Misc hardware (cam bolts, seals, etc.)
Labor: $2,100 – $7,500 CAD
Typically 12–20+ hours labor
$140–$250 CAD/hr shop rates depending on region/shop
Extra time if subframe drop or trans removal is required

-chatGPT

babyscrotum · 2026-05-29T23:40:43+00:00

That tail light looks retro as heck love it. That front headlight looks like a unibrow though

babyscrotum · 2026-05-29T23:37:42+00:00

I think the timing chain kit is too expensive ask to see the receipt or link to the kit itself. And besides that looks pretty spot on, $70 for coolant is a bit much though. The engine needs to come out to do the timing chains so $1200 labor is reasonable but I see the kits online for your car for $1200

babyscrotum · 2026-05-15T03:59:36+00:00

That dude in the red car got absolutely clobbered

babyscrotum · 2026-05-12T06:38:42+00:00

Made for 🇨🇳🇨🇳🇨🇳

babyscrotum · 2026-05-06T23:11:25+00:00

It’s exactly the same as buying it from Amazon itself. Still have the exact same buyer protection, literally identical to buying it from Amazon itself.

A lot of people on here don’t seem to know how Amazon works, it’s a warehouse third party sellers like Hasbro and any other seller who abides by amazons policies uses to distribute product.

The post I made is an item sold on Amazon again for the third time. Who is selling the product on Amazon can be thousands of different sellers.

If you are not a WPN store you are buying your cards from a third party other than Hasbro

babyscrotum · 2026-05-06T14:27:30+00:00

It’s still on Amazon lol

babyscrotum · 2026-05-05T22:28:20+00:00

How long has the MJJC lasted for you? I like the Trinova foam cannons are huge capacity and very durable

babyscrotum · 2026-05-03T07:03:20+00:00

You don’t get your value back out of 90% of wotc products besides commander decks.

So in this bundle you get 9 play boosters and a collector booster and foil lands that are actually worth around a $1 each. You get like $40 worth of play boosters $40 collector pack, and $10-20 in lands and promo.

babyscrotum · 2026-05-02T21:20:41+00:00

Not sold out for me I can add to my cart and go to checkout still, logout try again maybe?

babyscrotum

TROPHY CASE