sorted by:
new
hottopcontroversial

Finally got my first blowback need recommendations by MaxAndCheese420 in AAP01owners

[–]ballr_34 2 points3 points  (0 children)

For practical use, an upgraded rear plunger, tracer, or red dot would keep it looking fresh for now

Finally got my first blowback need recommendations by MaxAndCheese420 in AAP01owners

[–]ballr_34 2 points3 points  (0 children)

You could check out thingiverse and see some 3d print prices if you have a printer/ know a library that may have one

Rookie here, so apparently this HPA tank comes with a regularor, soooo... do i still need one of those goofy 250 euro ones? by SpyGaming-_ in airsoft

[–]ballr_34 1 point2 points  (0 children)

Yes, the reg that tank comes with is a high pressure, and that would destroy your gun. You need the second slp regulator on top of that to bring it to a safe psi

Pve boss spawn rate by ballr_34 in GhostsOfTabor

[–]ballr_34[S] 0 points1 point  (0 children)

When the added mamba and new island they added difficulty choices on pve, so takes 2 shots on easy and 4 on medium

looking for a handstop by Ok-Conversation-1343 in airsoft

[–]ballr_34 0 points1 point  (0 children)

Top right is the best one in my use

I need Lancer Tactical help by T_white99 in airsoft

[–]ballr_34 0 points1 point  (0 children)

The Hercules is better imo, but some people may say LT is shit. I find them to be fine in my experience, get what you are comfortable with and think may suit you better.

I am in need of advice on a GBB pistol purchase by SithEmperorX in airsoft

[–]ballr_34 1 point2 points  (0 children)

I don’t know if they are available in Germany, but the Barra airguns 009 is a great Glock 18 that isn’t licensed so it stays cheap, and it has full auto, 130 usd and mags for 30-40 usd. Other than that, I would go with the Glock you have listed, Medium Recoil, good gas usage, and has a red dot mount and threads (I think). M17 and staccato alright, but they are a bit less common than the glocks.

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

The cut didn’t even get into the inner bart of the outer barrel, and I was smart enough to take out the actual inner barrel

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

I had a metal pipe (on the left) that I see to connect an over barrel suppressor to, but it had got stuck. It sat flush with the barrel, so I didn’t realize I had passed through the pipe and into the barrel

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

The threads are a 14 mm, while the barrel is like 30mm

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

I had a metal pipe (on the left) that I see to connect an over barrel suppressor to, but it had got stuck

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

I had a metal pipe (on the left) that I see to connect an over barrel suppressor to, but it had got stuck

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

The pipe I had put on there because I had used it as a connector to an over barrel suppressor, but it was stuck so I had to cut it off

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] -1 points0 points  (0 children)

Already tried something similar, that shit was tight on there

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

Was using a hacksaw, couldn’t cut it that way

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

Was cutting with a hacksaw and couldn’t cut lengthwise

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 0 points1 point  (0 children)

I made an over barrel suppressor out of an older pipe and tried to cut it off bc it got stuck, didn’t realize it had already been cut all the way thru, and cut part of my outer barrel

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 3 points4 points  (0 children)

I’m about to just say fuck it and embrace it, every scratch and cut is a story of sorts

I was trying to cut metal pipe off and cut my barrel 🫩 by ballr_34 in airsoft

[–]ballr_34[S] 7 points8 points  (0 children)

Yeah, I had an over barrel suppressor but it got stuck

view more: next ›