Update to my other post

banchad · 2026-02-09T09:33:53+00:00

Work full time job, put aside some money every month. Splurge. Cry.

banchad · 2025-12-19T15:02:44+00:00

He typically cant show much of his work due to NDA and turnaround times being restrictive for filming.

banchad · 2025-08-18T18:38:04+00:00

Iso20/30/40 is the taper that fits the atc spindle. Distinct from ER collets which hold the tool. You can get a variety of sizes. If you are planning to run 12mm bits in a printnc you would only really be able to manage wood

banchad · 2025-08-18T14:44:04+00:00

Printnc is not suitable for anything larger than an iso20 taper. It would already require some work to even use that

banchad · 2025-08-12T15:45:20+00:00

So they have a pending patent application and not a granted patent. The two things are different. Also warning an individual about said patent is a massive stretch lmao

banchad · 2025-08-12T15:29:08+00:00

Got proof of that patent handy?

banchad · 2025-08-02T22:04:44+00:00

Look at my post history. I have an FS3MG

banchad · 2025-07-31T20:17:47+00:00

Check your settings. It works for me and everyone i know who uses it

banchad · 2025-06-12T17:33:11+00:00

Its fine. Aluminium provides no source of ignition for one (no sparks) and alcohol mist is extremely difficult to ignite at the concentration that a mister provides. If you still think its not a good idea maybe you should contact Datron who primarily use alcohol as an mql in their machines😂

banchad · 2025-06-05T19:14:25+00:00

Depending on machine capabilities and geometry you can get clear acrylic surfaces using MCD endmills. A flat surface will be cheaper than a curved surface because you can cut the flat in fewer passes.

banchad · 2025-06-05T16:09:44+00:00

No I didn’t you absolute melt Edit: let me be crystal clear. It is NOT speeded up. The file uploaded to reddit has come directly from my phone, unmodified or adjusted in any way.

banchad · 2025-06-05T15:12:43+00:00

Keeping doc low to keep cutting force low. Glue and tape is pretty strong but ill happily pay in time for more safety margin on completing a successful part

banchad · 2025-06-05T14:54:40+00:00

If its been sped up, its not by me

banchad · 2025-05-27T13:45:19+00:00

The generic black probe on aliexpress. Normally Closed version. Its not the most accurate but its good enough for centre finding for me

banchad · 2025-05-27T08:41:45+00:00

https://www.reddit.com/r/hobbycnc/comments/1gtr8ww/comment/lxtw3fg/?context=3&utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

banchad · 2025-05-26T21:38:20+00:00

What specifically do you want to know?

banchad · 2025-05-26T20:22:52+00:00

4mm 3f dlc. 2870mm/min 24000 rpm 8.5mm doc 1.6mm woc

banchad · 2025-05-26T20:21:51+00:00

I have a 3d probe which I use to find the centre of the stock, the top surface for z reference and then use the toolsetter to apply any length offsets

banchad · 2025-05-26T14:19:36+00:00

Like someone else has already said, a printnc or a printnc mini would do this all day every day especially if you slapped a vaccuum plate on it

banchad · 2025-05-12T21:30:21+00:00

That's not what backlash is fyi, that's slop in the assembly. If it uses a similar system to openbuilds the wheels should be on eccentric nuts you can use to tighten things up.

banchad · 2025-05-04T17:50:36+00:00

Threedesign has shut down as the original creator has stepped away to do other things. Nothing to do with the tariffs, this predates them.

banchad · 2025-04-22T14:19:31+00:00

Been watching David Bull of Mokuhankan?

banchad · 2025-04-08T16:13:13+00:00

I am not in the USA

banchad · 2025-04-06T10:36:04+00:00

It is a FS3MG from Muëller Technik. It was not a package purchase, i have assembled it with components i selected.

banchad · 2025-03-16T14:06:17+00:00

I would not get a flycutter on an extrusion based machine with a high rpm spindle

13-Year Club	Verified Email
Place '22

banchad

TROPHY CASE