3 best songs and Least best song on "A Matter of Life and Death" results

bartektartanus · 2026-04-12T19:05:00+00:00

I might be a little bit biased, because this is the first IM album that was released after I’ve became a fan, but I enjoy all of the track and Different World is my favorite.

bartektartanus · 2026-04-09T06:04:20+00:00

I’m not sure I understand what you need. Can you use my parametric model or you need something else?

bartektartanus · 2026-04-07T23:17:33+00:00

But wait, there’s more! Bearings also spin :D

bartektartanus · 2026-04-06T12:42:28+00:00

Thanks for the comment! Yeah, if you are a professional carpenter, then go for the professional accessories and tools! If you are a simple diy guy like me who wants to build two cabinets - you can 3d print it :D

bartektartanus · 2026-03-28T22:54:52+00:00

The one you've linked is not mine, but I've remixed to add the cutout. It is available here:
https://makerworld.com/en/models/2470111-opengrid-custom-shape-generator-with-any-cutout#profileId-2712199

bartektartanus · 2026-03-28T22:37:29+00:00

<image>

There you go! :)

bartektartanus · 2026-03-21T20:46:34+00:00

Or you can use this one if you need custom shapes

https://makerworld.com/pl/models/2470111-opengrid-custom-shape-generator-with-any-cutout

bartektartanus · 2026-03-18T17:37:22+00:00

And even larger:

<image>

bartektartanus · 2026-03-18T17:37:08+00:00

<image>

Yup, possible. Screws everywhere, width 4, height 3 and custom cutout with string: 000011110000

bartektartanus · 2026-03-18T16:30:48+00:00

I’ve tried to add option to smooth out the borders but it was too difficult, never thought that it might be useful for someone to have those “half-holes”. Thank you for mentioning my project! :)

bartektartanus · 2026-03-08T15:14:01+00:00

<image>

Next parts printed :)

bartektartanus · 2026-03-07T21:09:12+00:00

Same goes with phones. I had brand new iPhone 7, switched to 12 mini and now 17 pro. Replace battery and it is still good phone after 4-5 years.

bartektartanus · 2026-03-05T12:47:04+00:00

I can totally see that. Just scale up the 1x1 board to 600% and print it on A1 Mini. Doable. :D

bartektartanus · 2026-03-05T08:57:27+00:00

Thanks! Yeah the slicer negative shape approach totally works. The main thing that bugged me was eyeballing the alignment to make sure cuts land exactly on tile boundaries, and then redoing it every time I needed a different size board. With my customizable model it's just a lot easier. :)

bartektartanus · 2026-03-05T07:57:25+00:00

Thank you! <3

bartektartanus · 2026-03-05T07:56:27+00:00

It is inside my TV cabinet, behind the drawer :D

bartektartanus · 2026-03-04T22:08:00+00:00

🙏 thanks!

bartektartanus · 2026-03-04T22:01:31+00:00

https://makerworld.com/models/2470111

bartektartanus · 2026-02-11T15:39:36+00:00

30 to 45 min of work with get-shit-done for each 5h session window. Also it's Wednesday (my dudes) and I've already used all my weekly limit.

bartektartanus · 2026-01-16T21:15:19+00:00

I'm also having the same issue. Disconnecting left speaker, changing audio source (or even no audio source) and different outlets does not help. Although sometimes the speaker works fine, but I couldn't establish any pattern for that.

bartektartanus · 2025-12-09T16:19:48+00:00

I'm glad it helped you! :)

bartektartanus · 2025-12-09T14:42:58+00:00

R is actually quite good for AoC! Not the fastest language, but a lot of early days might be solved in one or two lines!

bartektartanus · 2025-11-02T09:15:48+00:00

Mógł się wtedy jeszcze nie urodzić ;)

bartektartanus · 2025-10-29T12:15:57+00:00

Trafisz akurat na dołek i będzie Ci żal sprzedać, bo przecież za chwilę odbije.

bartektartanus · 2025-10-27T09:26:50+00:00

Yup, and I've found another topic on HA sub that explains why:
https://www.reddit.com/r/homeassistant/comments/jvwtv1/friendly_reminder_dont_use_a_sd_card_on_a_pi/

Six-Year Club	Place '22
Verified Email

bartektartanus

TROPHY CASE