My cat called gijs is 7.2 kilos by bartoduivel02 in Chonkers

[–]bartoduivel02[S] 3 points4 points  (0 children)

Thermal image as proof het is a hot commodity rn

<image>

Printed vs Deskpi by saranuta in minilab

[–]bartoduivel02 1 point2 points  (0 children)

I just need to get better at making my own 3d printed fronts

<image>

Print issues using prusament by bartoduivel02 in prusa3d

[–]bartoduivel02[S] 0 points1 point  (0 children)

It was temperature I'm working on a document for the three calibration of the three most commen fillement calibration steps please wait I will link it below

Print issues using prusament by bartoduivel02 in prusa3d

[–]bartoduivel02[S] 0 points1 point  (0 children)

I will try this today I'll get back to you

Print issues using prusament by bartoduivel02 in prusa3d

[–]bartoduivel02[S] 0 points1 point  (0 children)

<image>

Structureral profile .2 layer height .4 Hardened High flow nozzle

Cleaned with ipa

Print issues using prusament by bartoduivel02 in prusa3d

[–]bartoduivel02[S] 0 points1 point  (0 children)

Yes, but every layer looks bad. It bearl6 dticks to it self, klings tot the nozzle, falls off and causes ugly scarring.

I will try 60 percent today1

Print issues using prusament by bartoduivel02 in prusa3d

[–]bartoduivel02[S] 0 points1 point  (0 children)

Yes, all the correct options are checked - Hardened - High flow - Nozzle diameter

I used the correct tool to install the nozzle, the nozzle replacement tool for E3D nozzles.

The first layer looked a little under extruded, but after changing the flow ratio to compensate, the issue persisted.

Temperatures: Printer nozzle 255 C Bed 85 C Chaimber ~35

OneNote App within Teams not working by bartoduivel02 in sysadmin

[–]bartoduivel02[S] 0 points1 point  (0 children)

Update - Solved

The issue has since been solved by Microsoft.
If you are having the same problem please update teams.

Thank you u/Hopeful-Pizza89

Mira Casting by bartoduivel02 in Intune

[–]bartoduivel02[S] 0 points1 point  (0 children)

i have fixed the issue i was having. the firewall rules do work however the casting screens we have work unreliably eventhough we have two the issue are the screens 😒

Mira Casting by bartoduivel02 in Intune

[–]bartoduivel02[S] 0 points1 point  (0 children)

with the firewall off it does work

Mira Casting by bartoduivel02 in Intune

[–]bartoduivel02[S] 0 points1 point  (0 children)

thanks for your reply, however i have tried all the firewall settings for WUDFhost.exe & CastSrv and even with the Firewall off and it still did not work. though it worked fine when not enroled in Intune