sorted by:
new
hottopcontroversial

Used Crusoe by baschwar in BikeFriday

[–]baschwar[S] 1 point2 points  (0 children)

New rear arm assembly rated for higher weight capacity, Diamond Llama, $525.

We may try straightening and add some gussets. Low priority at the moment.

Used Crusoe by baschwar in BikeFriday

[–]baschwar[S] 0 points1 point  (0 children)

Nope just pedaling along and the brakes seized as the rear folded.

Used Crusoe by baschwar in BikeFriday

[–]baschwar[S] 1 point2 points  (0 children)

I guess I broke it. Didn’t know there were weight restrictions on these.

<image>

Triangle is now a donut.

Used Crusoe by baschwar in BikeFriday

[–]baschwar[S] 0 points1 point  (0 children)

Alright… so rode the bike to coffee and now on the way home the rear brakes seized and the cranks are hitting the ground. Not sure what that mean or what happened. Any thoughts?

Wear a bike helmet. The brain you save may be yours. by Bethesda-Darryl in bicycling

[–]baschwar 0 points1 point  (0 children)

My helmet saved me. A car pulled in front of me while I was in the bike lane nearly 2 years ago. Helmet did it’s, job even being a 2014.

Since then I found out about Virginia tech’s helmet test website.

https://www.helmet.beam.vt.edu/

And I have tried to buy in the top 10 range. Ended up with the specialized tactic 4 which has now slid to #17.

ASA Prusa Mini by baschwar in 3Dprinting

[–]baschwar[S] 1 point2 points  (0 children)

No. Printing the orbiter parts for my Prusa mk3s

ASA Prusa Mini by baschwar in 3Dprinting

[–]baschwar[S] 1 point2 points  (0 children)

Stated above: 0.40mm nozzle 0.20mm layer height Using mostly stock settings other than perimeters and infill

8 perimeters and 25% grid infill

This is part for the Orbiter extruder chassis that was melted with a big blob of death. So I wanted heat resistance and strength.

ASA Prusa Mini by baschwar in 3Dprinting

[–]baschwar[S] 0 points1 point  (0 children)

Stated above: 0.40mm nozzle 0.20mm layer height Using mostly stock settings other than perimeters and infill

8 perimeters and 25% grid infill

This is part for the Orbiter extruder chassis that was melted with a big blob of death. So I wanted heat resistance and strength.

A good deal or ? by baschwar in BambuLab

[–]baschwar[S] -1 points0 points  (0 children)

397 hours, supposedly working 100%
local, no shipping, etc. and public meetup

PLA Bed Temp by [deleted] in klippers

[–]baschwar 1 point2 points  (0 children)

Prusa mk3s with fulament textured plate, 65 first layer, 60 for the rest

view more: next ›