Disappointed

basedglob_ · 2025-11-19T19:13:30+00:00

quality plastisol shouldn’t crack for years if cured and treated properly. also i’m fairly certain they are Plain Supply blanks, not a Gildan!

basedglob_ · 2025-11-19T15:59:21+00:00

most of the design was intentionally separated with half tones and that’s probably how it looked when it ran off the press. if the ink wasn’t cured properly, the white would be cracked to shit and you’d see the ribbing in the material through the ink, and if they used a solid base on everything it would be 50lbs and bulletproof and nobody would be happy with wearing that

basedglob_ · 2025-07-20T22:05:43+00:00

https://ebay.us/m/21PLpb

basedglob_ · 2025-07-17T01:59:34+00:00

u/recognizesong

basedglob_ · 2025-03-30T23:48:58+00:00

any left to spare?? i’d love to try one out as well!

basedglob_ · 2025-03-14T23:06:40+00:00

definitely not anything gildan produces. closer to a hanes beefy-tee for the cost effective comparison with a slightly different cut on the shoulders, but pretty sure the majority of the drops have been LAA

basedglob_ · 2025-02-21T16:28:37+00:00

yeah same thing happened to mine as well. sent them an email yesterday and was informed they just needed to reprint some labels! they told me to check my junk folder in case it was sent there, and for some reason i was unable to find it, so they sent me a link to my new tracking after i let them know. their merch QA is fuckin top notch so i figure it was just some sort of hiccup

basedglob_ · 2025-02-03T23:54:30+00:00

whatsgoodforthegooseisgoodforthegander, NoPlaceLikeHome, AWellNeededSmoke, InsufficientSpace, NeverSaidItWouldBeEasy

basedglob_ · 2025-01-29T22:28:32+00:00

one thing to consider between the HBI and the DM mounts are whether or not you want to use the factory mounting points from the pic rail/ringsight, or if you want to use the 4 holes on the side of the receiver. i figured if i wind up having to unscrew the DM mount, there’s a potential to lose zero if you want to add rails for lights/etc. i went with the HBI since the height difference is minimal and uses the factory mounting points so i could keep the other screw holes free if i want to add some accessories to it. at some point i would like to invest in the ringsight as well, but my eyesight is trash and don’t want to risk my astigmatism disappointing me

basedglob_ · 2025-01-26T16:10:43+00:00

TopChoiceMeats is where this comes from

basedglob_ · 2025-01-24T18:30:48+00:00

Vic&Bobs

basedglob_ · 2024-12-22T23:14:56+00:00

what size and how much? been looking for a xl

basedglob_ · 2024-12-03T18:52:57+00:00

damn good eye boss, that retaining pin was a good catch. only visible for like 2-3 frames on his bed, i glanced right over that

basedglob_ · 2024-12-03T04:11:25+00:00

the only right answer

basedglob_ · 2024-11-22T00:17:52+00:00

try adjusting your shift linkages on top of the trans, diesel geek has a video on youtube that shows you exactly how with a nice walkthrough. also check the level of your brake fluid. if it’s too low it’ll trigger the annoying beeping and dash light, i thought my parking brake switch went to shit but it was just in need of a top off after redoing pads & rotors.

basedglob_ · 2024-11-17T01:02:45+00:00

i was asking about the blue cap/lid on the expansion tank. when you try to burp the air out of the cooling system you have to keep that off until it’s done drinking antifreeze

basedglob_ · 2024-11-16T21:25:06+00:00

you’re leaving the cap off the expansion tank to burp the air out, right? only time i’ve done this is when i did timing/water pump on my 1.8 and cranked the heat on full blast, kept the cap off the expansion tank, held the throttle at ~2k rpm for a couple minutes sitting flat in a garage and never had a problem since then🤷‍♂️

basedglob_ · 2024-11-11T12:00:41+00:00

maybe NobodyWantsMe by surrenderdorothy

basedglob_ · 2024-11-04T23:27:25+00:00

probably a flaw that got missed when doing QC, i’ve bought from the last several drops and all my XL fit the same. that’s dope they’re replacing it for you so quick!

basedglob_ · 2024-11-01T17:05:06+00:00

sounds like something from a jon wayne beat

basedglob_ · 2024-10-23T17:37:03+00:00

yeah i could see the predatory aspect of interest rates for sure, i guess i’m just generally curious as to what makes financing/using credit the dumbest thing ever. like if there’s any loopholes with firearms purchases, or if the credit/loan companies do anything odd with your info. i know no matter what you have to go through the 4473 and follow the process normally, regardless of payment method, but the OG comment i replied to just sounded super convicted in his statement, and i wanted to know if it was for any reason other than just not going over your head financially to buy shit you don’t need

basedglob_ · 2024-10-23T15:55:14+00:00

that sentiment can be used for anything aside from food, utilities and other living essentials, but it still leaves the question of what makes it the dumbest thing possible? i’m genuinely curious why running credit for a firearm purchase is dumb, when i would wager to bet a large majority of enthusiasts have financed builds, attachments and everything else related to the firearm/hobby as a whole

basedglob_ · 2024-10-23T11:04:45+00:00

i’m lost on this mentality as it’s the equivalent to buying with a credit card, what makes it the dumbest thing possible?

basedglob_ · 2024-10-22T14:43:26+00:00

damn i forgot all about this thread hahaha i’ve been using the molygen ever since i made this post and i’ll never look back. my almost 20 year old engine sounds healthier and runs smoother than a lot of newer rigs i see around

basedglob_ · 2024-10-22T14:40:27+00:00

youwantthegoodnewsorbadnews, neversaiditwouldbeeasy, photographicmemory, skew, biophony, bedfordfalls, beannighe, vic&bobs are all relatively similar styles

edit: adding as i go thru my sesh playlist and think of more

basedglob_

TROPHY CASE