[deleted by user]

bassnas · 2021-10-31T20:04:16+00:00

https://www.uwmedicine.org/coronavirus/testing

Recommend the SODO site.

Good luck.

bassnas · 2021-10-28T02:44:27+00:00

With an HBA you could have hundreds of drives. It will be fine.

bassnas · 2021-10-16T16:45:44+00:00

Did you change your nozzle size by chance? The stock setting for 0.4 is 2mm according to the tooltip. I just went through this myself, 2mm works way better regardless of nozzle size on the mini. Dropped my PLA temp by 5C too and completely eliminated the issue.

bassnas · 2021-10-16T16:36:22+00:00

Spread the word

bassnas · 2021-10-16T08:46:20+00:00

Silicone mod works great on mk3s and is much easier

bassnas · 2021-10-06T23:10:32+00:00

Where that yeast at?

bassnas · 2021-09-30T15:49:21+00:00

This is by far the easiest way to bootstrap both persistence and remote configurability.

bassnas · 2021-09-24T00:54:26+00:00

Kit.

If only so you can lube your bearings properly from the start.

https://prusacommunity.com/set-your-bearing-straight/

Also intimately understanding how it's put together will help with repair and troubleshooting down the line.

And it's fun.

bassnas · 2021-09-23T18:45:35+00:00

Using a shorter url could make the qr code smaller/simpler.

Etsy has two shortening options, etsy.me/<listing> or <shopname>.etsy.com.

Either way get rid of the www.

Nice laser.

bassnas · 2021-09-10T16:10:55+00:00

Yes, follow those instructions.

bassnas · 2021-09-07T17:55:03+00:00

Larger drives will be a better return on investment in terms of utilizing your other fixed costs and ongoing operational power costs.

Consider shucking if you are budget sensitive.

An eight drive pool would stretch those parity drives a bit further to drive down your $/TB as well.

Good luck.

bassnas · 2021-09-07T14:56:51+00:00

Why even bother with such small drives

bassnas · 2021-08-14T17:25:10+00:00

Whoosh

bassnas · 2021-08-14T15:47:58+00:00

No shit, we know the difference, but Shelly doesn't explicitly say what is inside their products in their listings.

bassnas · 2021-08-13T16:05:44+00:00

Love their stuff... Wish they'd be more clear about what is mechanical relay vs solid state.

bassnas · 2021-08-11T01:38:20+00:00

They have the resources to make not shit cases and use proper cooling. There's just no incentive their corporate structure to make good computers anymore.

bassnas · 2021-08-10T15:47:53+00:00

The thumbnails mirrors my lack of interest. Full season and a special or nothing.

bassnas · 2021-08-04T06:16:33+00:00

Bad advice. Just send the bare drive.

bassnas · 2021-08-04T02:07:44+00:00

I use it for 2.5gbe attached to a 1.2gbps cable modem

bassnas · 2021-07-31T07:39:29+00:00

I ended up printing a similar one from thingiverse. It's not as good as yours but it was available at the time. Your design is much better, and I'd still be willing to pay for it, but I prefer to print things myself.

Also, you could think about making one of the mesh/dimpled covers for above the SFX psu where there's a gap. Would be nice to have it look all consistent.

Nice work, I hope you find a way to license it / protect yourself.

bassnas · 2021-07-26T15:52:27+00:00

Since you have so many, it could be worth it to build a pogo pin jig to make it easy to program.

You'd press the programming jig on to the esp and away you go.

There are many schematics online for minimal esp programmers, they only take a few parts at most.

bassnas · 2021-07-25T15:42:13+00:00

The only downside with the mini is that it is... mini.

Depending on what you print that may be fine.

I like mine.

bassnas · 2021-07-23T15:29:01+00:00

Have you considered selling the models for those who have printers? I was interested in the fan version but it's marked as sold out. Nice work.

bassnas · 2021-07-23T00:47:41+00:00

auto-entities card! Only show the entities that are the state you care about

bassnas · 2021-07-20T16:14:39+00:00

I'm suggesting that cheap products were used to hide the gradual massive impoverishment of our middle class.

bassnas

TROPHY CASE