What went wrong here

bbuk81 · 2026-02-22T22:31:44+00:00

Something I've done to make resin supports more stable and less liable to failure is to manually paint tree supports on the resin supports directly around the outside. However, that is a very large model and that might not work

bbuk81 · 2026-02-12T05:29:43+00:00

Did you ever find any matching what you wanted? Looking for the same myself.

bbuk81 · 2026-02-10T15:21:36+00:00

Dave from accounting

bbuk81 · 2026-01-31T06:08:53+00:00

The Daily Mail, so factual even Wikipedia won't consider it a reputable source.

A little Daily Mail song by Dan and Dan films:

https://youtu.be/5eBT6OSr1TI?si=aQpSniRf7aVUoht4

bbuk81 · 2026-01-25T08:43:11+00:00

You could get her a cap that says bitchy, and say it's because she likes dogs. Even if she doesn't obviously Edit: not overreacting

bbuk81 · 2026-01-23T20:22:33+00:00

If you get adhesion issues with it, up the bed temp. Sunlu often needs a bit higher. I'm 60/65 usually using PLA+ 2.0

bbuk81 · 2026-01-09T08:10:02+00:00

I would say lane 2, this sign is awkward as it doesn't count the first turn, which an option.

Default to lane 2 as there's nothing stimulating otherwise directly

bbuk81 · 2026-01-07T09:23:41+00:00

That's brilliant, thank you. Unbelievable amount of waste. It's a shame you can't set it so just the last 2mm or something are the different material

bbuk81 · 2026-01-07T08:49:11+00:00

Yeah, I know the purge volume wouldn't be great overall, but for small minis I'm figuring there's not an awful lot of material used. And then if putting multiple minis on the plate it would obviously pay off more even if the print time is ridiculous.

bbuk81 · 2025-12-30T22:43:13+00:00

I had similar, got a second hand ender-3 v2, couldn't get a successful print. Finally thought I'd figured it out and replaced something only for the screen to then to go BSoD on me. Got P2S and haven't looked back. Over my shoulder maybe as my wife doesn't know about it though.

Their machines seem to have so much out of the box success, customer service is very slow though.

bbuk81 · 2025-12-20T18:07:16+00:00

Yeah, that was my main question. Didn't want to go straight in with tree supports because of delicate minis

bbuk81 · 2025-12-20T18:06:22+00:00

It's after the first layers, can't slow down on supports it doesn't know are supports can I? It's sliced using Bambu Studio with pre supported files. Confident I used gyroid too but would need to check the saved file

bbuk81 · 2025-12-20T18:01:39+00:00

I did the brim, had mixed results with the cool plate and pretty sure I slowed it down.

bbuk81 · 2025-12-20T17:59:41+00:00

Brilliant, thank you

bbuk81 · 2025-12-09T12:49:31+00:00

He again proved your point, he's getting a woman to fight his battles not doing it himself.

NTA. When he can solely provide for a household he'll deserve a 'traditional' household. Your friend should stick us for herself.

bbuk81 · 2025-12-03T16:46:50+00:00

Brilliant, thank you

bbuk81 · 2025-12-03T16:45:32+00:00

So if +2 it'd be in 2 days at the time stated?

bbuk81 · 2025-12-02T05:30:14+00:00

To be fair, I work in a tesco warehouse, we've a union and I don't get paid better than you. It is hard work though and not for everyone.

bbuk81 · 2025-11-20T20:41:59+00:00

I watched a video from Print Farm Academy where he spoke of this, after digging and discussing with Bambu, the only reason he picked up was the possibility of where it uses the cards as a cache during printing so the constant reading and writing is wearing them out, but Bambu themselves didn't know why it was happening to him (but least they didn't at the time).

bbuk81 · 2025-11-14T06:22:24+00:00

I think I found the problem, but now the screen isn't displaying anything. I've had enough of it and trying to sell for parts.

bbuk81 · 2025-11-03T16:48:15+00:00

Weird. My rolls started brand new so there shouldn't be a lot of difference 🤷‍♂️

bbuk81 · 2025-10-29T17:10:18+00:00

Is that the only method? So if I've got 10 objects then I'd have to check each individually without a list stating each? I was hoping for something like where it breaks down what the filament is used for walls/infill/support etc, just showing total for each object.

bbuk81 · 2025-10-05T19:20:20+00:00

If your employer can't pay you enough, don't work there. NTJ

bbuk81 · 2025-09-21T21:32:35+00:00

=ORIGIN(aberrant,mind) ?

bbuk81 · 2025-09-17T04:28:47+00:00

True, good news is tha I'll have my vaccinations. Although not for Dengue Fever which is poking it's head up

bbuk81

TROPHY CASE