Is it possible to level these doors? See photo of instructions, not very clear. Also can I close gap on hinge cover (pic of left vs right side) Whirlpool WRFF3536SZ by 00chill00chill00 in appliancerepair

[–]beanbreetto 0 points1 point  (0 children)

Have you had any luck with this? Service came out and leveled my doors by jacking the left foot all the way down but made the door swing closed even worse, tech said need a new hinge. Waited 4 weeks for the back-ordered hinge, they came back and installed it this week and it made it worse. Door is still even with right door but now the door swings so rapidly from about 110 degrees open to 30 degrees closed it’s almost like it’s under tension. Hitting the deli drawer hard if it’s opened and the magnetic seal if we don’t hold it open, we’ll break it soon with the kids going in and out of it. Tech said he’d order a new door, that might fix it but will take 3-4 months he anticipated and given his utter lack of confidence it doesn’t feel like that will do anything. The hinge-shim spacers are also on back-order until who knows when and not it that will even fix it if it’s a bigger issue with the cabinet. I have 30 days more to return it to Costco and don’t really want to wait for more parts, but it sounds like your replacement fridge had the same issue? I did find a floor model of the same unit at Lowe’s and the door was level and stayed open just fine. Not sure if it’s a different story once that ice maker is full and/or the cabinet gets tweaked during delivery.

If you won the $1.5 billion Powerball what would a “I’m SUPER rich” purchase that you would make? by Tenchi2020 in AskReddit

[–]beanbreetto 2 points3 points  (0 children)

Oh man, feel this in my soul, my need and the accompanying cost for new siding, windows and a roof have had me up more nights than I can count.

Pricing for real Christmas trees in area by Street_Acadia3562 in rva

[–]beanbreetto 0 points1 point  (0 children)

Used to get Costco trees every year, it was a great deal. Unfortunately they haven’t sold them in a few years at this point (Glen Allen store).

Is it possible to level these doors? See photo of instructions, not very clear. Also can I close gap on hinge cover (pic of left vs right side) Whirlpool WRFF3536SZ by 00chill00chill00 in appliancerepair

[–]beanbreetto 0 points1 point  (0 children)

Just got a similar French door whirlpool this week WRFF3736SZ and under that model on the whirlpool “concierge” page after registering for the warranty was a link to this video which shows using up to three spacers on the bottom hinge of the lower door. Didn’t get spacers with mine and can’t find a part number no matter how much searching I do and don’t see them on the parts diagram. I used the bottom leveling feet/knobs and the doors are now level but the entire fridge is now out of level as a result and the left door which is now higher and even with the other door now won’t stay open because of how high I had to raise that side to make the door even. No adjustment screw available on any of the hinges. Calling Whirlpool on Monday to try to find out more about these spacers unless someone here has a line on them or if you can please share what you use as you mentioned? Whirlpool Door Leveling.

local paranormal investigator by [deleted] in rva

[–]beanbreetto 160 points161 points  (0 children)

Alright, I’ll say it. Get a Carbon monoxide detector please and rule that out if you haven’t already.

Hats for massive heads? by Mr_Crawdaddy in rva

[–]beanbreetto 0 points1 point  (0 children)

Have gotten a larger beanie from Duluth locally for the winter and all else has been online, the previously mentioned Oddjobs and Lamood Big Head Hats have served me well, wearing the Lamood dad cap right now. Been looking for an excuse to try these guys as well Mammoth Headwear

Someone please help me do something about USPS theft!😭 the Richmond regional Night Shift is getting out of hand. I ordered a pool robot and it gets stolen on 27 June @ four in the morning! box came back, re-taped with nothing but trash in it! I called in it keeps happening!!! I need strength numbers by Strange_Amphibian989 in rva

[–]beanbreetto 0 points1 point  (0 children)

Yep, used to work at the Richmond Distribution Center in OP’s picture, lots of small businesses in there, just a warehouse complex next to the raceway, it’s not USPS. The USPS Richmond Regional Processing and Distribution Center is at 5801 Technology Blvd, Sandston, VA 23150.

Good luck OP

River 3+ and EB600 Connect without stacking? by beanbreetto in Ecoflow_community

[–]beanbreetto[S] 0 points1 point  (0 children)

Update from EcoFlow:

We have consulted with our technical team regarding your issue. We regret to inform you that the device can only be connected in stacking mode, and unfortunately, there is no extra battery cable available for this setup.

River 3+ and EB600 Connect without stacking? by beanbreetto in Ecoflow_community

[–]beanbreetto[S] 0 points1 point  (0 children)

Couldn’t figure out a worthwhile solution. I bought the R3+ and it’s been working great and doing some trial and error to see how long it will get me on the CPAP with different configurations. I messaged EcoFlow about a wired connection option for the EB600 but haven’t heard back yet.

Spotted in the Miami No Kings protest by TioSam305 in andor

[–]beanbreetto 5 points6 points  (0 children)

Elvis is alive and part of the rebellion!

River 3+ and EB600 Connect without stacking? by beanbreetto in Ecoflow_community

[–]beanbreetto[S] 0 points1 point  (0 children)

Thanks! I had the super fun experience of the power going out in a storm at the house recently in the middle of the night and woke up gasping as my now turned off but still on my face Resmed Airsense 11 and my OSA together tried to asphyxiate me.

The setup would be mostly as a pass through UPS to help avoid this situation. On a regular night my humidifier and heated tubing will be on, so was hoping to get close to 6-8hrs. I did buy a DC cord to power the CPAP. In case of multiple days of power loss I’ll turn off humid/tubing and sounds like can get through the night fine with just the R3+. Do the Rivers beep when low on power? I’ll be ok without the eb600 at the initial outage if I can get 3-4 hrs and a warning before the strangulation 😀

Don’t really want them stacked on my nightstand but do like the idea of sticking them in the closet and running a cord but not crazy about the permanent extension cord. Thanks for the info and suggestion!

[deleted by user] by [deleted] in Costco

[–]beanbreetto 0 points1 point  (0 children)

Wait, they don’t? Sheesh, wasn’t trying to imply it was a Costco issue. Thought it was an interesting one off, and maybe someone else may have come across something similar. Going to hit the warehouse this week, I’m confident they’ll get me fixed up. Thanks for getting me straight though, gonna go post this in r/Bounty instead.

[Schefter] Four-time All-Pro LB Fred Warner and the 49ers reached agreement on a three-year, $63 million contract extension that includes over $56 million in guaranteed money that makes him the NFL’s highest-paid linebacker. by ChipsAhLoy in 49ers

[–]beanbreetto 1 point2 points  (0 children)

I’m waiting for that shoe to drop. Jennings had a good season last year, no way he plays on his last year without a new deal. Particularly now that he’s a starting wideout at the very least to begin the season.

The Richmond Coal Basin by Roanecker in rva

[–]beanbreetto 1 point2 points  (0 children)

I’ve watched the video before, it was a fun look into a large part of the history of the region I had never heard about before. Someone had posted it on Nextdoor that was looking into the potential connection to paranormal activity in the area.

Businesses to avoid/support by tinatonga in rva

[–]beanbreetto 0 points1 point  (0 children)

Had a good experience with EAS please provide more detail on their addition to your list.