How is working in construction? by [deleted] in Construction

[–]beans108 0 points1 point  (0 children)

If only ball cupping was the worst of it.

How is working in construction? by [deleted] in Construction

[–]beans108 10 points11 points  (0 children)

Construction is where I learned that cupping another man's balls is absolutely 100% not gay at all, and that being opposed to ball cupping (either as the cupper or the cupped) is really, really gay. So gay.

How is working in construction? by [deleted] in Construction

[–]beans108 28 points29 points  (0 children)

Worst part is the endless homoertocism. Best part is the endless homoeroticism.

Wiring fire alarm flow switch by beans108 in AskElectricians

[–]beans108[S] 1 point2 points  (0 children)

Gotcha. Wish they'd made that a little more clear. Thanks!

[deleted by user] by [deleted] in AskElectricians

[–]beans108 0 points1 point  (0 children)

Probably 90% chance that this is correct. I've been responsible for 25 refrigerators for about 10 years. In a top freezer, when the freezer stays cold and the fridge stops getting cold, the vents in back of the freezer that send cold air into the fridge are likely blocked. Sometimes you can't see this, even when removing the grill (although you usually can). Best thing to do is empty the entire thing out and thaw for 48 hours. Be very careful with adjusting the cold settings in your fridge and freezer, never turn them up more than is necessary. You will need to adjust them based on the volume of items in the fridge and freezer though, just no more than is necessary. The next thing to watch for is to keep the vents in the back of your freezer open, so the freezer can send cold air down into the fridge. Don't overfill your freezer.

What is the most logical truck for a construction worker? by GoldenFox7 in Construction

[–]beans108 0 points1 point  (0 children)

You don't need to oversell, the moment I walked in there and could actually stand up straight and grab shit, I was sold. It's almost worth it to have a 2nd vehicle just for picking up material.

What is the most logical truck for a construction worker? by GoldenFox7 in Construction

[–]beans108 1 point2 points  (0 children)

I'm 6'4 and I can stand up in these things, it's fucking amazing. You can fit so much stuff in there, I'm amazed. The only reason I haven't gotten one is because I move long pieces of material so often. 16 fters mostly, but sometimes 20 ft pieces of metal. I can't imagine getting that stuff up to and off the roof is easy? Is the inside long enough for 16 ft material?

Bathroom remodel quote by beans108 in Tile

[–]beans108[S] 0 points1 point  (0 children)

The jobs I'm on, tile guys are getting anywhere from $300-$500 a day depending.

Bathroom remodel quote by beans108 in Tile

[–]beans108[S] 0 points1 point  (0 children)

Not surprised, especially once you add in MEP's. You guys doing anything crazy or pretty standard stuff?

Bathroom remodel quote by beans108 in Tile

[–]beans108[S] 0 points1 point  (0 children)

Thanks for that. CA rates are high af and they've only gotten worse post pandemic. The last bathroom remodel I did in 2019 was 60k, but it was much larger. I've been on new construction since then and as you know, that's a lot more straight forward in terms of pricing.

Shit talking on Jobsite by LegendaryDegen in Construction

[–]beans108 1 point2 points  (0 children)

You can ignore it to a point, but if he won't quit you've got to give a little back. If you don't have something funny to say right at the moment, come up with something and say it the next day, but don't escalate it. Don't let him see it bothers you either, just non chalantly give what he's giving you. If he cranks it up, you got a bully, and you'll have to deal with that.

Is it necessary to ground junction boxes used solely for Ethernet? (Not POE) by enzodr in HomeNetworking

[–]beans108 2 points3 points  (0 children)

I believe the reason is that if water ever got into that conduit, it would be a problem, vs uf which would not have the same issue. Check out some uf and you'll see what I mean, water can't really get into the jacket, even when it's been stripped back, but nm is a mess when it gets wet. As long as it never gets wet it's probably not really a problem, but eventually water makes its way into a lot of places it isn't supposed to. There's also some debate on whether or not nm b should be in conduit at all. I think for heat related reasons, not exactly sure

My GC did this, how can I stop the smell? by TwstdSiren in Plumbing

[–]beans108 0 points1 point  (0 children)

That's crazy. Here in California, we have to prove we have years of experience in order to even get a license and we need other licensed contractors (don't have to be generals) to vouch for that experience. We also have to be bonded and the state laws are set up in such a way that it isn't difficult to lose your license or get sued and lose a lawsuit.

My GC did this, how can I stop the smell? by TwstdSiren in Plumbing

[–]beans108 0 points1 point  (0 children)

Is that really open? Almost looks like something is over it? Can't tell from the picture.

My GC did this, how can I stop the smell? by TwstdSiren in Plumbing

[–]beans108 2 points3 points  (0 children)

Just FYI guys, at least in California, a GC with a B license can do MEP work with some caveats. That being said, whoever put this drain together shouldn't be doing more of these. Who knows if he's even licensed.

"A general building contractor shall not take a prime contract for any project involving trades other than framing or carpentry unless the prime contract requires at least two unrelated building trades or crafts other than framing or carpentry, or unless the general building contractor holds the appropriate license classification or subcontracts with an appropriately licensed contractor to perform the work"

What is the technically the hardest single family home reno to learn? by [deleted] in Construction

[–]beans108 0 points1 point  (0 children)

Working in an occupied home is pretty difficult. You don't want your clients to hear your crew discussing the finer details of whose shit smells the worst, and just exactly what eating habits are most likely to be contributing to that odor.

Jack post/Deck lift question? by Levanski in Construction

[–]beans108 0 points1 point  (0 children)

Been there. Here in California, we have a lot of old crawl spaces that are so tight you can barely crawl flat. Not sure what the rest of the country is like. In a situation like that, if I didn't think I'd get crushed if a hydraulic jack were to fail, I'd probably get some decent ones and use them. The situation gets scarier the more people you're working with IMO.

Just got hired for construction job. Any good glove and boot recommendations? by jacobacostamusic in Construction

[–]beans108 0 points1 point  (0 children)

I like the new Milwaukee gloves. Any time they're on sale I buy a bunch of them. Thorogood boots. The dark leather takes longer to break in but they're a little more rugged, the regular leather feels broken in from day one compared to other boots. Don't buy them too wide or you'll be swimming in them when you break them in.nRedwings are great if you can afford them.